ct-cmmphys-mib

ct-cmmphys-mib Download

MIBs list

This module provides an enterprise-specific CMM container MIB.

You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the ct-cmmphys-mib .

OID list for ct-cmmphys-mib

cmmBoardEntry
A CMM board present in this unit.
cmmBoardType
The value of this object uniquely defines the CMM board type - a vendor's authoritative identification for a module. By convention, this value is allocated within the SMI enterprises subtree(1.3.6.1.4.1), and provides an easy and unambiguous means for det ...
cmmNumModules
The value of this object is the number of CMM modules contained on this physical CMM circuit board.
cmmModuleNumModems
Number of modems per CMM module.
cmmTFTPServer
The value of this object is the IP address of the TFTP server where the object code for CMM modules resides. This object is persistent.
cmmUpgradePath
The value of this object is the path to the object code for CMM modules on the TFTP server. This object is persistent.
cmmUpgradeFlag
The value of this object is a flag that indicates whether or not to upgrade the software for the CMM modules on the board. This object is persistent.
cmmCommitFlag
The value of this object is a flag that indicates whether or not to commit the software for the CMM modules on the board. This object is persistent.
cmmModemResetLimit
The value of this object is the number of times that a modem can be reset within a given time span before it is declared to be faulty. If the value is 0 then the modem will never be declared faulty. This object is persistent.
cmmModemResetTime
The value of this object is the time span (in minutes) during which the given number of resets must occur before the modem is declared to be faulty. This object is persistent.
cmmOutgoingInactivityTimeout
The value of this object is the duration (in seconds) of a period of inactivity before an outgoing call is terminated. This object is persistent.
cmmIncomingInactivityTimeout
The value of this object is the duration (in seconds) of a period of inactivity before an incoming call is terminated. This object is persistent.
cmmAsyncBaseOrigATCmdStr
The value of this object is the default or base set of AT commands to be used when originating an async call.
cmmAsyncBaseAnswerATCmdStr
The value of this object is the default or base set of AT commands to be used when answering an async call.
cmmAsyncOrigStrModifier
The value of this object is a set of additional AT commands to be used when originating an async call. This object is persistent.
cmmAsyncAnswerStrModifier
The value of this object is a set of additional AT commands to be used when answering an async call. This object is persistent.
cmmAsyncOperOrigATCmdStr
The value of this object is the operative set of AT commands to be used when originating an async call. It includes the base string, the modifier string, and the call timeout value.
cmmAsyncOperAnswerATCmdStr
The value of this object is the operative set of AT commands to be used when answering an async call. It includes the base string, the modifier string, and the call timeout value.
cmmHdlcBaseOrigATCmdStr
The value of this object is the default or base set of AT commands to be used when originating an HDLC call.
cmmHdlcBaseAnswerATCmdStr
The value of this object is the default or base set of AT commands to be used when answering an HDLC call.
cmmHdlcOrigStrModifier
The value of this object is a set of additional AT commands to be used when originating an HDLC call. This object is persistent.
cmmHdlcAnswerStrModifier
The value of this object is a set of additional AT commands to be used when answering an HDLC call. This object is persistent.
cmmHdlcOperOrigATCmdStr
The value of this object is the operative set of AT commands to be used when originating an HDLC call. It includes the base string, the modifier string, and the call timeout value.
cmmHdlcOperAnswerATCmdStr
The value of this object is the operative set of AT commands to be used when answering an HDLC call. It includes the base string, the modifier string, and the call timeout value.
cmmBoardAdminStatus
The value of this object is the administrative status of the CMM board. down(1) -- all modems that belong to this board are to be removed from service immediately leave-service(2) -- each modem that belongs to this board is to be removed from service at t ...
cmmBoardOperStatus
The value of this object is the operational status of the CMM board. initializing(1) -- all modules that belong to this board are booting up or in the process of a software upgrade active(2) -- all modules that belong to this board are available for accep ...
cmmModuleTable
A list of CMM modules present on each CMM board in this unit
cmmModuleEntry
The value of this object is a CMM module that is present in this unit
cmmModuleID
The value of this object is an index that uniquely identifies the CMM module within the physical CMM board.
cmmDpramSize
Size of the DPRAM (in bytes) on the CMM module.
cmmSdramSize
Size of the SDRAM (in bytes) on the CMM module.
cmmCpuType
CPU type on the CMM module.
cmmCpuSpeed
The speed of the CPU (in Megahertz) on the CMM module.
cmmCpuFwRev
Revision of the CPU firmware on the CMM module. This code is a product of RSA.
cmmEpldId
EPLD ID on the CMM module. (Read from the Altera chip.)
cmmEpldRev
Revision of the EPLD firmware on the CMM module. This code is produced by Cabletron.
cmmNumBadModems
The value of this object is the number of bad modems on the CMM module.
cmmModuleAdminStatus
The value of this object is the administrative status of the CMM module. down(1) -- all modems that belong to this module are to be removed from service immediately leave-service(2) -- each modem that belongs to this module is to be removed from service a ...
cmmModuleOperStatus
The value of this object is the operational status of the CMM module. initializing(1) -- the module is booting up or in the process of a software upgrade active(2) -- all modems that belong to this module are available for accepting calls leaving-service( ...
cmmModemTable
A list of modems present on each CMM module on each CMM board in this unit
cmmModemEntry
This object contains data for a single CMM modem.
cmmBoardID
This object contains the logical number of the CMM board to which the modem belongs.
cmmModemID
This object contains the logical number of the modem on the CMM module to which the modem belongs.
cmmIFNum
This object contains the number of the instance of the Interface MIB that is associated with this modem.
cmmSessionNum
This object contains the session number that is associated with this modem. Session numbers are assigned, starting with 1, from the first modem on the first module of the first CMM board and continuing through the last modem of the last module of the las ...
cmmDdpPartNum
Part number of the DDP controller on the CMM module. (Read from the DDP chip.)
cmmDdpRevLevel
Revision level of the DDP controller on the CMM module. (Read from the DDP chip.)
cmmDdpFwRev
Revison of the DDP controller firmware on the CMM module. This code is produced by Rockwell.
cmmDDPInterrupts
This object contains the number of interrupts received by the CMM transfer manager since initialization.
cmmRxFlowCtlEvts
This object contains the number of received flow control events.
cmmTxFlowCtlEvts
This object contains the number of transmitted flow control events.
cmmCallStatus
This object contains the current call status.
cmmCallOrigin
This object contains an enumerated value that indicates whether the call originated locally or remotely.
cmmRobbedBitDetected
This object contains the robbed bit signalling pattern that was detected by the modem or 0 if none.
cmmCorrectionType
This object contains an enumerated value that indicates the type of error correction that was negotiated.
cmmCompressionType
This object contains an enumerated value that indicates the type of data compression that was negotiated.
cmmRxRate
This object contains the current receive rate.
cmmTxRate
This object contains the current transmit rate.
cmmEncoding
This object contains the current PCM encoding type.
cmmFraming
This object contains the current framing type.
cmmInitialConnectRate
This object contains the initial connect rate (in BPS) or the session.
cmmMaxHostWindows
This object contains the maximum number of host windows.
cmmMaxCmmWindows
This object contains the maximum number of CMM windows.
cmmNumOutHostAcks
This object contains the number of host window acks that have not been processed by the CMM side.
cmmNumOutCmmAcks
This object contains the number of CMM window acks that have not been processed by the host side.
cmmToNetworkOctets
This object contains the number of data bytes transmitted (modem -> central office switch).
cmmFromNetworkOctets
This object contains the number of data bytes received (central office switch -> modem).
cmmToHostOctets
This object contains the number of data bytes transmitted (modem -> m-bus host).
cmmFromHostOctets
This object contains the number of data bytes received (m-bus host -> modem).
cmmToNetworkFrames
This object contains the number of frames transmitted (modem -> central office switch).
cmmFromNetworkFrames
This object contains the number of frames received (central office switch -> modem).
cmmOversizeFrames
This object contains the number of HDLC frames received that were greater than the maximum permissible size.
cmmOverrunErrors
This object contains the number of HDLC overrun errors.
cmmCRCErrors
This object contains the number of HDLC CRC errors.
cmmAbortedFrames
This object contains the number of HDLC frames that were aborted while they were being received.
cmmRetrainEvents
This object contains the number of times that retrain and renegotiation events have occurred since initialization.
cmmARAEvents
This object contains the number of times that automatic rate adaption events have occurred.
cmmARAFlag
This object contains a flag that indicates whether or not an ARA event has occurred during the current session.
cmmCarrierLossEvents
This object contains the number of times that carrier loss events have occurred.
cmmCarrierLossFlag
This object contains a flag that indicates whether or not a carrier loss event has occurred during the current session.
cmmRcvSignalLevel
This object contains the receive signal level.
cmmRcvSignalEQM
This object contains the receive signal EQM.
cmmTDMSlot
This object contains the number of the TDM slot used by this session.
cmmResetModemStats
This object is used to reset the statistics pertaining to the selected modem. If written with the value 'true', the statistics will be reset. If written with the value 'false', no action will be taken. Its value will always be read as 'false'.
cmmModemAdminStatus
This object contains the administrative status of a modem. down(1) -- the modem is to be removed from service immediately leave-service(2) -- the modem is to be removed from service at the completion of its current call, if any up(3) -- the modem is to be ...
cmmModemOperStatus
This object contains the operational status of a modem. initializing(1) -- the module to which the modem belongs is booting up or in the process of a software upgrade idle(2) -- the modem is available for accepting calls but has no call in place active(3) ...
cmmATCommand
This object contains the user-defined AT command string. It can contain up to 256 characters, including a carriage return that will automatically be inserted and a NULL terminator.
cmmSelectedModem
This object contains the ID of the modem to which the free-form AT command string should be sent.
cmmATCmdStatus
This object allows the free-form AT command string to be sent and allows the status of the command string to be examined.
cmmATCmdResult
This object contains the result string from issuing the free-form AT command .

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list