ct-pic-mib Download

ctPicNumberEntries

Defines the number of PIC modules defined by this MIB.

ctPicTable

A table that describes the contents of all PIC modules accessible by this module.

ctPicEntry

Description of a specific instance of a PIC module.

ctPicSlot

Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0.

ctPicIndex

Uniquely identifies the instance of a PIC in a particular slot.

ctPicLocation

Defines location of the PIC chip. This takes on any of the encoding values defined below for backplane, module, daughter board, brim.

ctPicStatus

Provides the status of the specific PIC chip. the values are defined as follows: other(1) - firmware can not determine status present(2) - PIC seems to be functional notPresent(3) - PIC not found but expected checkSum(4) - A check sum error occured error ...

ctPicVersion

Reflects the version of the PIC implementation that this PIC conforms to. This has the format x.yy . If non-existent, this object will be set to all blanks(ascii 32).

ctPicModuleType

Defines the standard module type value as defined in ctron-oids.

ctPicMfgPN

Describes the manufacturing level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all ...

ctPicMfgSN

Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Board level revision If any f ...

ctPicMfgPartNumb

This object presents the part number portion of the ctPicMfgPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).

ctPicMfgSerialNumb

This object presents the serial number portion of the ctPicMfgSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).

ctPicMfgReworkLocation

The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicMfgPN object however in a more human readable format. If non-existent, this object will be set to all blanks(asci ...

ctPicMfgMfgLocation

The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks( ...

ctPicMfgDateCode

The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to ...

ctPicMfgRevisionCode

The 3 character board level revision code field of this module. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).

ctPicTLPN

Describes the top level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(asc ...

ctPicTLSN

Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Top level revision If any field of this ...

ctPicTLPartNumb

This object presents the part number portion of the ctPicTLPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).

ctPicTLSerialNumb

This object presents the serial number portion of the ctPicTLSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).

ctPicTLReworkLocation

The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicTLPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii ...

ctPicTLMfgLocation

The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(a ...

ctPicTLDateCode

The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to a ...

ctPicTLRevisionCode

The 3 character top level revision code field of this module. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).

ctPicPcbRevision

Defines the Cabletron revision of the art work for this module. If non-existent, this object will be set to all blanks(ascii 32).

ctPicMacAddr

The base MAC address(ethernet format)assigned to the module. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32).

ctPicNumbRsvdAddrs

The number of reserved MAC addresses starting at the address as defined in ctPicMacAddr. If no MAC addresses are reserved this object should have a value of 0.

ctPicBoardRevision

Defines the Cabletron board level revision level code for this module. If non-existent, this object will be set to blanks (ascii 32).

ctPicModuleTypeString

Describes the module associated with this PIC in a human readable format. If non-existent, this object will be set to blanks (ascii 32).

ctPicDCDCconverterType

Describes the voltage of the installed DCDC Converter input and output lines. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32).

ctPicDCDCconvInputPower

Describes the maximum allowed input power for the DCDC input line. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32).

ctPicSMB1promVersion

Describes the current version of the SMB1 prom. If the Module does not contain an SMB1 prom this object will be set to blanks (ascii 32).

ctPicAtmMacAddr

The Atm MAC address(atm format)assigned to the chassis. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32).

ctPicOEMVendorId

Represents the OEM vendor for a product. If the Module does not program this value this object will be set to blanks (ascii 32).

ctPicOEMVendorName

ASCII name of the OEM vendor for the product. If the Module does not program this value this object will be set to blanks (ascii 32).

ctPicMfg97SN

Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 4 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 2 bytes - Board level revision If any f ...

ctPicMfg97DateCode

The 4 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfg97SN object however in a more human readable format. If non-existent, this object will be set t ...

ctPicMfg97RevisionCode

The 2 character board level revision code field of this module. This object contains the same information as presented in ctPicMfg97SN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).

ctPicTL97SN

Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 4 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 2 bytes - Top level revision If any field of this ...

ctPicTL97DateCode

The 4 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTL97SN object however in a more human readable format. If non-existent, this object will be set to ...

ctPicTL97RevisionCode

The 2 character top level revision code field of this module. This object contains the same information as presented in ctPicTL97SN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).

ctPicOEMTLSN

Describes the top level serial number of the module as specified by the OEM for this device. If non-existent, this object will be set to all blanks (ascii 32).

ctPicECOTable

Each module that contains a PIC may have several ECOs performed on it. The ctPicECOTable reflects a history of the last 5 ECOs that have been performed on this module.

ctPicECOEntry

Describes a particular PIC ECO entry.

ctPicECOSlot

Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. This refers to the same slot as identified by ctPicSlot in ctPicTable.

ctPicECOIndex

The specific PIC instance that this ECO entry pertains to. This refers to the same instance as identified by ctPicIndex in ctPicTable.

ctPicECOID

Uniquely defines the ECO entry that is being described by this conceptual row.

ctPicECONumber

Defines Cabletron's ECO number that describes the revision of the hardware. This object is organized as follows: 6 Characters ECO Number 2 Characters Rework Location 4 Characters Date Code

ctPicDiagTable

Each module that contains a PIC may have several Diags performed on it. The ctPicDiagTable reflects a history of the last 8 Diags that have been performed on this module. Important: This table only contains entries diagnostic entries that are defined. ...

ctPicDiagEntry

Describes a particular PIC Diag entry.

ctPicDiagSlot

Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. This refers to the same slot as identified by ctPicSlot in ctPicTable.

ctPicDiagIndex

The specific PIC instance that this Diag entry pertains to. This refers to the same instance as identified by ctPicIndex in ctPicTable.

ctPicDiagID

Uniquely defines the Diag entry that is being described by this conceptual row.

ctPicDiagResults

Defines Cabletron's Diag results code.

ctPicControlTable

A table allowing management control of PIC functionality.

ctPicControlEntry

Describes a particular PIC Control Table entry.

ctPicRefresh

Setting this value causes the PIC Driver to clear cached memory and to reread the PIC chip. This functionality removes the need for manufacturing to power cycle a board to ensure proper PIC programming. Reading this object always returns a zero (0).