ctron-download-mib Download

ctDLForceOnBoot

When set to a 1, the system will request a download during the next system restart. If no server is found and the current image in flash memory is valid, the system will boot using the flash-resident image.

ctDLCommitRAMToFlash

When written with a 1, the boot software will erase flash memory, compress the downloaded code if necessary, and save the image into flash memory. Upon completion of this operation, the flash memory driver resets this object to 0, indicating completion o ...

ctDLInitiateColdBoot

When written with a 1, the boot software initiates a system reboot. When written with a 2, the boot software initiates a soft reboot of the system. The soft reboot does not perform the Boot PROM Power-Up diagnostics. If only one form of reboot is supporte ...

ctDLTFTPRequestHost

The IP address of the TFTP server to be used when firmware is to be loaded across the network.

ctDLTFTPRequest

The filename requested of the server when firmware is to be loaded across the network.

ctDLLastImageFilename

The value of ctDLFileName during the last successful image download. This is the name of the file, on the TFTP server, that was download to become the current image.

ctDLLastServerIPAddress

The value of ctDLNetAddress during the last successful image download. This is the IP address of the TFTP server used to download the current image.

ctDLFlashSize

Denotes the size, in bytes, of flash memory contained on this module.

ctDLFlashCount

Denotes the number of times that flash memory has been reprogrammed. This value is initialized to 1, when the module is initially powered up.

ctDLFirmwareBase

Denotes the starting RAM address of the firmware.

ctDLFirmwareTop

Denotes the ending RAM address of firmware.

ctDLFirmwareStart

Denotes the RAM entry point of the firmware as established by the boot process.

ctDLBootRev

Denotes the revision of boot firmware in the module. The first octet provides the version, and the second provides the revision.

ctDLForceBootp

When set to 1, this object forces the client to send a BOOTP request packet when rebooting. The client will make several attempts before timing out if a BOOTP server does not respond. This object remains set.

ctDLServerName

This OID is reserved for future use of the BOOTP server name. This field can be used when a client wants to get boot information from a particular BOOTP server.

ctDLOnLineDownLoad

During normal operation this object has the value of 1. By setting this object to a value of forceDownLoad(2) an image download via TFTP will be performed, ctDLNetAddress specifies the TFTP server and ctDLFileName specifies the file name of the image on t ...

ctDLOperStatus

This object reflects the status of the download code. normalOperation(3) - Indicates that either no download has been started, or that a download was started and has finished normally. downLoadActive(4) - indicates a download is currently in progress. dow ...

ctDLNetAddress

The IP Address of the TFTP server to be used for uploading and downloading configuration files and for downloading images.

ctDLFileName

The file name to be used to specify the image or configuration file on the TFTP server specified by ctDLNetAddress. This should be a complete path filename.

ctDLErrorString

If the value of ctDLOperStatus is downloadCompleteError(5) then this object will provide a more complete description of the error. Otherwise this object will be the zero length string.

ctDLTftpServerGatewayIPAddress

The IP address of the gateway/router which connects this SNMP agent to the TFTP server.

ctDLBlockCount

Current TFTP block count of an active session. If no TFTP transfer is in progress, zero is returned.

ctDLBootPartitionStatus

Status of the boot partition or partitions. A value of good(1) indicates that all boot partitions contain a valid checksum. A value of bad(2) indicates that one or more boot partitions contain an invalid checksum and the the image was not able to fix the ...