ctron-sfps-port-mib Download

MIBs list

You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the ctron-sfps-port-mib .

OID list for ctron-sfps-port-mib

sfpsInPortConfigTable: This table contains the configuration information of each configured inbound SFPS switch port. If SFPS is not configured on a port, than an entry will not exist.
sfpsInPortConfigEntry: Each entry specifies the SFPS configuration for the SFPS inbound switch port for which the entry exists.
sfpsInPortConfigPort: The primary index to the SFPS in port table. This identifies the inbound SFPS switch port for which the entry exists.
sfpsInPortConfigAdminStatus: Sets the administrative state of the SFPS inbound switch port for which the entry exists.
sfpsInPortConfigOperStatus: Indicates the current operating condition of the SFPS on the inbound switch port for which this entry exists.
sfpsInPortConfigOperTime: Indicates the elapsed time, in hundredths of a second, that sfpsInPortOperStatus has been in its current operational state on the SFPS inbound switch port for which this entry exists.
sfpsInPortConfigType: Sets the type of port access attribute for the inbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host manag ...
sfpsInPortConfigReservedBW: Sets the amount of Bandwidth that is reserved for the inbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given to another port if unused.
sfpsInPortConfigAllocBW: Sets the amount of Bandwidth that is allocated for the inbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth.
sfpsInPortConfigQoS: Sets the desired QoS service class for the inbound SFPS port for which this entry exists.
sfpsInPortConfigQSize: Indicates the maximum inbound queue size for this port. Size is indicated in packets (packet descriptors).
sfpsInPortConfigQLen: Indicates the actual inbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current depth of queue.
sfpsInPortConfigSwitchId: This entry is the id of the port.
sfpsInPortConfigMediaType
sfpsInPortConfigFrontPanelPort: This represents the front panel physical port number
sfpsInPortConfigLinkStatus: The link status of this port.
sfpsInPortConfigLinkStateAge: Number of time ticks that link has been in this state.
sfpsInPortConfigRouterPort: Specifies whether this port is a router port.
sfpsInPortConfigSlotNumber: Slot number in the chassis.
sfpsInPortConfigMib2PortId: Mib2 Port id
sfpsInPortConfigTopoAgent: Topology Agent
sfpsInPortConfigLayer3Learning: Topology Agent
sfpsOutPortConfigTable: This table contains the configuration information of each configured outbound SFPS switch port. If SFPS is not configured on a port, than an entry will not exist.
sfpsOutPortConfigEntry: Each entry specifies the SFPS configuration for the SFPS outbound switch port for which the entry exists.
sfpsOutPortConfigPort: The primary index to the SFPS in port table. This identifies the outbound SFPS switch port for which the entry exists.
sfpsOutPortConfigAdminStatus: Sets the administrative state of the SFPS outbound switch port for which the entry exists.
sfpsOutPortConfigOperStatus: Indicates the current operating condition of the SFPS on the outbound switch port for which this entry exists.
sfpsOutPortConfigOperTime: Indicates the elapsed time, in hundredths of a second, that sfpsOutPortOperStatus has been in its current operational state on the SFPS outbound switch port for which this entry exists.
sfpsOutPortConfigType: Sets the type of port access attribute for the outbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host mana ...
sfpsOutPortConfigReservedBW: Sets the amount of Bandwidth that is reserved for the outbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given to another port if unused.
sfpsOutPortConfigAllocBW: Sets the amount of Bandwidth that is allocated for the outbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth.
sfpsOutPortConfigQoS: Sets the desired QoS service class for the outbound SFPS port for which this entry exists.
sfpsOutPortConfigQSize: Indicates the maximum outbound queue size for this port. Size is indicated in packets (packet descriptors).
sfpsOutPortConfigQLen: Indicates the actual outbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current depth of queue.
sfpsOutPortConfigSwitchId: This entry is id of the port.
sfpsOutPortConfigMediaType
sfpsOutPortConfigFrontPanelPort
sfpsOutPortConfigLinkStatus: The link status of this port.
sfpsOutPortConfigLinkStateAge: Number of time ticks that link has been in this state.
sfpsOutPortConfigRouterPort: Specifies whether this port is a router port.
sfpsOutPortConfigSlotNumber: Slot number in the chassis.
sfpsOutPortConfigMib2PortId: Mib2 Port id
sfpsInPortStatsTable: This table contains the packet and byte counters for each inbound SFPS switch port.
sfpsInPortStatsEntry: Specifies the SFPS packet and byte counters for the inbound SFPS switch port for which this entry exists.
sfpsInPortStatsPort: The primary index to the SFPS port table. This identifies the SFPS inbound switch port for which the entry exists.
sfpsInPortStatsAdminStatus: Sets the administrative state of the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists.
sfpsInPortStatsReset: Resets the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists.
sfpsInPortStatsOperTime: Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the inbound SFPS switch port for which this entry exists.
sfpsInPortStatsPkts: Indicates the total number of SFPS packets that have been received, during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists.
sfpsInPortStatsDiscardPkts: Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists
sfpsInPortStatsBytes: Indicates the total number of SFPS bytes that have been received, during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists.
sfpsInPortStatsDiscardBytes: Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists.
sfpsInPortStatsQOverflows: Indicates the total number of queue overflow conditions have been experienced for the inbound SFPS switch port for which the entry exists.
sfpsInPortStatsLinkUps: The number of link ups that this port has seen.
sfpsInPortStatsLinkDowns: The number of link downs that this port has seen.
sfpsOutPortStatsTable: This table contains the packet and byte counters for each outbound SFPS switch port.
sfpsOutPortStatsEntry: Specifies the SFPS packet and byte counters for the outbound SFPS switch port for which this entry exists.
sfpsOutPortStatsPort: The primary index to the SFPS port table. This identifies the SFPS outbound switch port for which the entry exists.
sfpsOutPortStatsAdminStatus: Sets the administrative state of the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists.
sfpsOutPortStatsReset: Resets the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists.
sfpsOutPortStatsOperTime: Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the outbound SFPS switch port for which this entry exists.
sfpsOutPortStatsPkts: Indicates the total number of SFPS packets that have been received, during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exists.
sfpsOutPortStatsDiscardPkts: Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exists
sfpsOutPortStatsBytes: Indicates the total number of SFPS bytes that have been received, during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists.
sfpsOutPortStatsDiscardBytes: Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists.
sfpsOutPortStatsQOverflows: Indicates the total number of queue overflow conditions have been experienced for the outbound SFPS switch port for which the entry exists.
sfpsOutPortStatsLinkUps: The number of link ups that this port has seen.
sfpsOutPortStatsLinkDowns: The number of link downs that this port has seen.
sfpsPortAttributePort
sfpsPortAttributeAttributes
sfpsPortAttributeLearnSelfArp
sfpsPortAttributeAPIVerb
sfpsPortAttributeAPIPort
sfpsPortAttributeAPIAttribute

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list