ctron-ssr-hardware-mib Download
You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the
ctron-ssr-hardware-mib
.
OID list for ctron-ssr-hardware-mib
- sysHwNumSlots
- The number of slots present in the Shelf/Chassis.
- sysHwModuleTable
- A list of module entries.
- sysHwModuleEntry
- An entry containing management information applicable to a particular module.
- sysHwModuleSlotNumber
- The physical slot number of the module in the Shelf/Chassis.
- sysHwModuleType
- The physical module type.
- sysHwModuleDesc
- The description of the module with it's version number etc. For the Control Module it should have the software version, the amount of dynamic RAM, flash RAM.
- sysHwModuleNumPorts
- The number of physical ports on this Card/Module.
- sysHwModuleVersion
- The alpha-numeric version string for this Card/Module.
- sysHwModuleMemory
- System Memory size available on the Module. Reports -1 if no memory exists on this module, such as power supplies.
- sysHwModuleService
- The Cabletron service identifier string for this Card/Module.The board serial number is appended to the string too.
- sysHwModuleStatus
- The current status of this module, online or offline.
- sysHwPortTable
- A list of module entries.
- sysHwPortEntry
- An entry containing management information applicable to a particular module.
- sysHwPortSlotNumber
- The physical slot number of the module in the Chassis.
- sysHwPortNumber
- The port number of the physical port in the Card/Module.
- sysHwPortType
- The physical port type.
- sysHwPortConnectorType
- The physical port connector type.
- sysHwPortIfIndex
- The value of ifIndex used to access this port in the Interface MIB.
- sysHwPowerSupply
- The number and status of power supplies powering the Shelf/Chassis.
- sysHwFan
- The current state of the fans located inside the Shelf/Chassis.
- sysHwTemperature
- The current temperature status of the Shelf/Chassis.
- sysHwChassisId
- Operator defined serial number for this particular chassis/shelf.
- sysHwSwitchingFabric
- Status of Switching Fabric in shelf/chassis.
- sysHwControlModuleLED
- Status of the shelf/chassis Active Control Module's four LED displays.
- sysHwControlModuleBackupState
- Status of the the backup Control Module as interpreted from the active control module. CLI: system show hardware will present the following data: Redundant CPU slot : Not present
- sysHwLastHotSwapEvent
- The value of sysUpTime when the last hotswap of a physical module event occured.
- sysHwTotalInOctets
- The total number of octets into the switch.
- sysHwTotalOutOctets
- The total number of octets out of the switch.
- sysHwTotalInFrames
- The total number of frames into the switch.
- sysHwTotalOutFrames
- The total number of frames out of the switch.
- sysHwTotalL2SwitchedFrames
- The current number of frames switched at Layer 2 (transport).
- sysHwTotalL3SwitchedFrames
- The current number of frames switched at IETF Layers 3 (transport) and 4 (application).
- hwConfGroupV10
- A set of managed objects that make up version 1.0 of the SSR Hardware mib.
- hwConfGroupV11
- A set of managed objects that make up version 1.1 of the SSR Hardware mib.
- hwConfGroupV12
- A set of managed objects that make up version 1.2 of the SSR Hardware mib.
- hwConfGroupV30
- A set of managed objects that make up version 3.0 of the SSR Hardware mib.
You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
