ctsmtmib-mib Download
You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the
ctsmtmib-mib
.
OID list for ctsmtmib-mib
- ctsmtmibRingTable
- A list of fddi nodes found on the ring.
- ctsmtmibRingEntry
- A fddi ring entry containing information common to all stations in a token path.
- ctsmtmibRingSmtIndex
- The value of the SMT index associated with this ring.
- ctsmtmibRingMacIndex
- A unique value for each MAC within a given SMT.
- ctsmtmibRingNodeIndex
- The index of the node on the ring in reverse token flow order. It is sequential from 1 to n where n is the number of nodes on the ring at a given time.
- ctsmtmibRingMacAddr
- A canonical representation of the MAC address of the node.
- ctsmtmibRingUpStreamAddr
- This is a canonical representation of the upstream neighbor's address. The upstream neighbor is the last MAC to receive the token before this MAC. Unknown addresses should be specified as 00-00-F8-00-00-00.
- ctsmtmibRingNodeClass
- Reports if the node is a station or a concentrator.
- ctsmtmibRingMacCount
- The number of MACs on this FDDI node.
- ctsmtmibRingNonMasterCount
- The sum of all A ports, B ports, and S ports on this node.
- ctsmtmibRingMasterCount
- The number of master ports on this node.
- ctsmtmibRingTopology
- A bit mapped representation of the current state of the node. if state: Add 2**n where n = Wrapped Node 0 Unattached Concentrator 1 A-A Twisted Ring 2 B-B Twisted Ring 3 Rooted Statio ...
- ctsmtmibRingDuplicate
- A bit mapped representation of duplicate address information. if State: Add 2**n where n= My Duplicate: 0 UNA Duplicate: 1 where My Duplicate: This node determines that it's MAC address is same as the ...
- ctsmtmibMacTable
- A list of MAC entries. The total number of entries is given by the value of ctsmtmibRingMacCount with appropriate ctsmtmibRingMacAddr.
- ctsmtmibMacEntry
- A MAC entry containing information pertaining to a given MAC.
- ctsmtmibMacSmtIndex
- The value of the SMT Index associated with this MAC.
- ctsmtmibMacIndex
- A unique value for each MAC within a given SMT.
- ctsmtmibMacNifTxCts
- The count of Neighborhood Information frames transmitted by the MAC.
- ctsmtmibMacNifRxCts
- The count of Neighborhood Information frames received by the MAC.
- ctsmtmibMacSifTxCts
- The count of Status Information frames transmitted by the MAC.
- ctsmtmibMacSifRxCts
- The count of Status Information Frames received by the MAC.
- ctsmtmibMacEcfTxCts
- The count of Echo Frames transmitted by the MAC.
- ctsmtmibMacEcfRxCts
- The count of Echo Frames received by the MAC.
- ctsmtmibMacPmfTxCts
- The count of Parameter Management Frames transmitted by the MAC.
- ctsmtmibMacPmfRxCts
- The count of Parameter Management Frames received by the MAC.
- ctsmtmibMacRdfTxCts
- The count of Request Denied Frames transmitted by the MAC.
- ctsmtmibMacRdfRxCts
- The count of Request Denied Frames received by the MAC.
- ctsmtmibMacRingOpCts
- The count of the number of times the ring has entered 'Ring Operational' state from the 'Ring Not Operational' state.
- ctsmtmibMacTxCts
- A count that should as closely as possible match the number of frames transmitted by this MAC.
- ctsmtmibMacRingMapUpdateCts
- The count of the number of times the ring map table has been updated.
- ctsmtmibMacAutoNegotiation
- Indicates whether the station has auto-negotiation enabled or disabled.
- ctsmtmibAttachmentNumber
- The total number of attachments (across all SMTs) on this network management application entity. The value for this variable must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
- ctsmtmibAttachmentTable
- A list of Attachment entries. The number of entries is given by the value of fdmimAttachmentNumber.
- ctsmtmibAttachmentEntry
- An Attachment entry containing information common to a given set of Attachments. There is a natural association of Attachment resource indices to the PORT Indices. The resource index for the Attachment is equal to the associated port index for 'single-att ...
- ctsmtmibAttachmentSMTIndex
- The value of the SMT index associated with this Attachment.
- ctsmtmibAttachmentIndex
- A unique value for each Attachment on a given SMT.
- ctsmtmibAttachmentClass
- The Attachment class. This represents a PORT or a pair of PORTs plus the associated optional optical bypass that are managed as a functional unit. The PORT associations are the following unit. single-attachment - S Ports dual-attachment - A/B Port pairs ...
- ctsmtmibAttachmentIMaxExpiration
- I_Max (refer to ANSI SMT 9.4.4.2.1). Systems not implementing optical bypass should return a value of 0. Else the value should be returned in the granularity of 80ns.
- ctsmtmibAttachmentInsertedStatus
- Indicates whether the attachment is currently inserted in the node.
- ctsmtmibAttachmentInsertPolicy
- Indicates the Insert Policy for this Attachment.
- ctsmtmibSMTTable
- Describes the dual homed status for SMT entries.
- ctsmtmibSMTEntry
- A specific dual homed SMT entry.
- ctsmtmibSMTDualHomeStatus
- Indicates the current dual homed link status for a given SMT instance. notDualHomed(1) - This SMT is not dual homed. linkAorB(2) - Dual homed with link on A and no link link on B, or link on B and no link on A. linkAandB(3) - Dual homed with link on A and ...
- ctsmtmibSMTDualHomeWrpLEDStatus
- When on, the WRAP LED will be illuminated when the node is in a dual homed configuration with link on the A, B or both A and B ports. When off, the WRAP LED will not be illuminated when the node is in a dual homed configuration with link on A and B, but w ...
- ctsmtmibSmtIndex
- Specifies the particular SMT entry.
You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
