Cisco Channel Associated Signal Interface Channel Configuration Busy Out

1.3.6.1.4.1.9.9.85.1.3.1.1.4

The CAS channel busyout configuration. true - the CAS channel is busied out. false - the CAS is normal. The default value for this object is 'false'. ::= { ccasChannelCfgEntry 4 } --*********************************************************************** -- The CAS channel Status Table --*********************************************************************** SYNTAX SEQUENCE OF CcasChannelStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The CAS channel Status Table. It contains general information about the status of CAS channel. ::= { ccasChannelObjects 2 } SYNTAX CcasChannelStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the status table for each CAS channel. AUGMENTS { ccasChannelCfgEntry } ::= { ccasChannelStatusTable 1 } CcasChannelStatusEntry ::= SEQUENCE { ccasChannelStatusRecvSignalBits BITS, ccasChannelStatusBusyOut TruthValue, ccasChannelStatusInfoType INTEGER, ccasChannelStatusXmitSignalBits BITS } SYNTAX BITS { dBit (0), cBit (1), bBit (2), aBit (3) } MAX-ACCESS read-only STATUS current DESCRIPTION The receive ABCD signaling bits for the CAS channel. aBit - the signaling bit in the 6th frame bBit - the signaling bit in the 12th frame cBit - the signaling bit in the 18th frame dBit - the signaling bit in the 24th frame the cBit and dBit are only valid for E1 or T1 interface is operating in extended superframe (ESF) mode. REFERENCE EIA/TIA-464B, chapter 6.2 Digital Signaling and Supervision ::= { ccasChannelStatusEntry 1 } SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION The CAS channel busyout state. true - the CAS channel is busied out. false - the CAS is normal. ::= { ccasChannelStatusEntry 2 } SYNTAX INTEGER { unknown (1), speech (2), data56 (3), audio31 (4), audio7 (5), video (6), fax (7), modem (8) } MAX-ACCESS read-only STATUS current DESCRIPTION The Information Transfer Capability for the current or last call. unknown - If since system startup there has been no call on this interface, this object has a value of unknown(1). speech - refers to a non-data connection data56 - 56k data. audio31 - audio 3.1 kHz; refers to data mode connections audio7 - audio 7 kHz; refer to data mode connections; 'Unrestricted digital information with tones/ announcements'. video - as defined in Q.931 fax - Facsimile modem - V.3x modem REFERENCE Q.931 [8], chapter 4.5.5, octet 3 of bearer capability information element, combined with the User Rate (as defined in octets 5 and 5a to 5d), if rate adoption is being used.