Cisco Channel Associated Signal Interface Ds1 If Configuration Table

1.3.6.1.4.1.9.9.85.1.1.1

The CAS/DS0 General Configuration Table for T1/E1. It contains the CAS/DS0 related standard configuration information for T1/E1. ::= { ccasDS1Objects 1 } SYNTAX CcasDs1IfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the configuration table for each T1/E1. The entry is created when a T1/E1 hardware is detected. INDEX { ifIndex } ::= { ccasDs1IfCfgTable 1 } CcasDs1IfCfgEntry ::= SEQUENCE { ccasDs1IfCfgDs0ChannelsConfigurable OCTET STRING } SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION This object contains the bit map of the available DS0 channel in the DS1. The MSB (most significant bit) is DS0 channel number 1. The missing bytes is default to a value of 0. A 1-bit indicates the channel is available for configuration and a 0-bit indicates it isn't. The length of this object is either 3 octets (for T1) or 4 octets (for E1). The most significant bit is transmitted first. ::= { ccasDs1IfCfgEntry 1 } --********************************************************************* -- The CAS/DS0 Group General Configuration Table --********************************************************************* SYNTAX SEQUENCE OF CcasGrpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The CAS/DS0 Group Standard Configuration Table. It contains the general configuration information for the CAS/DS0 group of T1/E1 interfaces. ::= { ccasGrpGeneralObjects 1 } SYNTAX CcasGrpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A CAS/DS0 group entry. Each entry consists of the CAS group type and the CAS/DS0 group associated DS0 channels in a T1/E1. The value of ccasGrpCfgDs0Channels must be specified with at least one available DS0 channel in the CAS group associated T1/E1 before a new row in this table can become active(1). The entry of this table can only be created if the CAS/DS0 group associated DS1 ifEntry already exists. INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasGrpCfgTable 1 } CcasGrpCfgEntry ::= SEQUENCE { ccasGrpCfgIndex Integer32, ccasGrpCfgType INTEGER, ccasGrpCfgDs0Channels OCTET STRING, ccasGrpCfgServiceType INTEGER, ccasGrpCfgRowStatus RowStatus } SYNTAX Integer32 (0..30) MAX-ACCESS not-accessible STATUS current DESCRIPTION An arbitrary index that uniquely identifies a DS0 group in a T1/E1. ::= { ccasGrpCfgEntry 1 } SYNTAX INTEGER { emWinkStart (1), emWinkStartFgd (2), emImmedStart (3), emDelayDial (4), fxsLoopStart (5), fxsGroundStart (6), sasLoopStart (7), sasGroundStart (8), r2Analog (9), r2Digital (10), r2Pulse (11), p7 (12), fxoLoopStart (13), fxoGroundStart (14), fgdOS (15), nullSignaling (16), r1Itu (17), r1Modified (18), r1Turkey (19), fgdEANA (20), emMelImmedStart (21), emMelWink (22), emMelDelayDial (23), fxsMelcas (24), fxoMelcas (25), extsig (26), emLmr (27) } MAX-ACCESS read-create STATUS current DESCRIPTION The Signaling type of the DS0 group. emWinkStart - CAS E&M Wink Start. emWinkStartFgd - CAS E&M Wink Start with Feature group D. emImmedStart - CAS E&M Immediate Start. emDelayDial - CAS E&M Delay Dial. fxsLoopStart - CAS FXS Loop Start. fxsGroundStart - CAS FXS Ground Start. sasLoopStart - CAS SAS Loop Start. sasGroundStart - CAS SAS Ground Start. r2Analog - R2 ITU Q411. r2Digital - R2 ITU Q421. r2Pulse - R2 ITU Supplement 7. p7 - P7 switch. fgdOS - Bellcore Feature Group D : Operator Services Signaling nullSignaling - 64k clear channel r1Itu - R1 ITU. r1Modified - R1 Modified. r1Turkey - R1 Turkey. fgdEANA - FGD Exchange Access North American. emMelImmedStart - CAS E&M Melcas Immediate Start emMelWink - CAS E&M Melcas Wink Start emMelDelayDial - CAS E&M Melcas Delay Dial fxsMelcas - CAS FXS Melcas fxoMelcas - CAS FXO Melcas extsig - External Signal emLmr - CAS E&M Land Mobil Radio(LMR) interface REFERENCE EIA/TIA-464B, chapter 6.2.1.1 Signaling Interface Types. ITU-T Q411 - Specifications of signalling system R2 line signalling, analogue version. ITU-T Q421 - Specifications of signalling system R2 line signalling, digital version. ITU-T R2 Supplement 7 - Specifications of signalling system R2 line signalling, pulsed version. Bellcore, TR-NPL-000258 - Feature Group D section 3.4 for Exchange Access North American section 3.6 for Operator Services Signaling DEFVAL { emWinkStart } ::= { ccasGrpCfgEntry 2 } SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-create STATUS current DESCRIPTION This object contains the bit map of the selected DS0 channels to be added into this group. The MSB (most significant bit) is DS0 channel number 1. For T1, only higher 24 bits are used to specify the the CAS channels for the CAS group. A 1-bit indicates the channel to be added into group and a 0-bit indicates it isn't. DEFVAL { '00000000'H } ::= { ccasGrpCfgEntry 3 } SYNTAX INTEGER { none (1), casServSw56 (2), casServModem (3), casServAuto (4), sgcp (5), mgcp (6), other (7), trunkingService (8), h248 (9), ds0xconn (10), xgcp (11) } MAX-ACCESS read-create STATUS current DESCRIPTION Specify the Service type of the CAS/DS0 group. none - no service type casServSw56 - sw56 service for CAS casServModme - modem service for CAS casServAuto - auto service for CAS sgcp - Simple Gateway Control Protocol (SGCP) service. Used when DS0 is configured for null signaling. mgcp - Media Gateway Control Protocol (MGCP) service. Used when DS0 is configured for null signaling. other - none of the above and the below. trunkingService - This DS0 group is handled by trunking service application. h248 - ITU H.248 Media Gateway Control service. Used when DS0 is configured for null signaling. ds0xconn - Used for DS0 cross connection. xgcp - Media Gateway Control Protocol (MGCP) extension service including TGCP (Trunking Gateway Control Protocol) profiles feature. Used when DS0 is configured for null signaling. DEFVAL { none } ::= { ccasGrpCfgEntry 5 } SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION This object is used to create a new row or modify or delete an existing row in this table. The corresponding instance of ccasGrpCfgType can not be modified while this object has the value 'active'. ::= { ccasGrpCfgEntry 4 } --********************************************************************* -- The CAS Group E&M Standard Configuration Table --********************************************************************* SYNTAX SEQUENCE OF CcasGrpEMCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The CAS Group E&M Standard Configuration Table. It contains the CAS E&M group standard configuration information of T1/E1. ::= { ccasGrpEMObjects 1 } SYNTAX CcasGrpEMCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the configuration table for each CAS E&M Group in the T1/E1. The entry is created when the ccasGrpCfgType is configured as 'em' on a T1/E1 via configuration command. The entry is deleted when the CAS Group is de-configured from T1/E1. INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasGrpEMCfgTable 1 } CcasGrpEMCfgEntry ::= SEQUENCE { ccasGrpEMCfgDialType INTEGER, ccasGrpEMCfgDnisAni BITS, ccasGrpEMCfgLmrMCap INTEGER, ccasGrpEMCfgLmrECap INTEGER, ccasGrpEMCfgAutoGainControl TruthValue } SYNTAX INTEGER { dtmf (1), pulse (2), mf (3) } MAX-ACCESS read-write STATUS current DESCRIPTION Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. mf - Multi-Frequency (MF) digit. The default value of this object is dtmf(1). ::= { ccasGrpEMCfgEntry 1 } SYNTAX BITS { incomingDnis (0), incomingAni (1), outgoingDnis (2), outgoingAni (3) } MAX-ACCESS read-write STATUS current DESCRIPTION Specify the type of Destination Number Identification Service (DNIS) and Automatic Number Identification (ANI) support. MF tone supports both ANI and DNIS services. The DTMF tone only supports both incoming and outgoing DNIS. incomingDnis - support incoming DNIS feature. incomingAni - support incoming ANI feature. outgoingDnis - support outgoing DNIS feature. outgoingAni - support outgoing ANI feature. The default value of this object is '00'H. ::= { ccasGrpEMCfgEntry 2 } SYNTAX INTEGER { inact (1), audio (2), dial (3) } MAX-ACCESS read-write STATUS current DESCRIPTION The M lead behavior of E&M LMR interface. inact - The m-lead status should be ignored. audio - The m-lead status is used to control generating voice packet. dial - The first m-lead off to on status indicates call setup request. The following m-lead status change during the call should be ignored. DEFVAL { inact } ::= { ccasGrpEMCfgEntry 3 } SYNTAX INTEGER { seize (4), voice (5), inactive (6) } MAX-ACCESS read-write STATUS current DESCRIPTION The E lead behavior of E&M LMR interface. seize - The e-lead used as seize signal. voice - The e-lead status is used to indicate voice packet received or not. inactive -- e-lead is inactive. DEFVAL { seize } ::= { ccasGrpEMCfgEntry 4 } SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION This object is used to enabling or disabling automatic gain control on this interface. AGC allows dsp to adjust the input voice volume and avoid rapid voice volume change. DEFVAL { false } ::= { ccasGrpEMCfgEntry 5 } --********************************************************************* -- The CAS Group E&M Timing Parameters Table --********************************************************************* -- This table contains the CAS Group E&M timing parameters information. SYNTAX SEQUENCE OF CcasGrpEMTmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The E&M interface Timing Parameters table. It contains the configuration of the various E&M signaling protocol timing parameters. ::= { ccasGrpEMObjects 2 } SYNTAX CcasGrpEMTmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the E&M Timing Parameters Table for each E&M interface.