Cisco Channel Associated Signal Interface Group Sta Timing Digit Duration

1.3.6.1.4.1.9.9.85.1.2.4.2.1.1

Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType is dtmf. The default value of this object is 100 milliseconds. ::= { ccasGrpStaTmEntry 1 } SYNTAX Integer32 (50..500) UNITS "milliseconds Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType is dtmf. The default value of this object is 100 milliseconds. ::= { ccasGrpStaTmEntry 2 } SYNTAX Integer32 (10..20) UNITS "pulses per second Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 10 pps. ::= { ccasGrpStaTmEntry 3 } SYNTAX Integer32 (100..1000) UNITS "milliseconds Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 500 milliseconds. ::= { ccasGrpStaTmEntry 4 } --********************************************************************* -- The CAS group associated custom ABCD bits configuration Table --********************************************************************* -- This table contains the A/B/C/D bits handling parameters information. SYNTAX SEQUENCE OF CcasGrpABCDCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The CAS group custom ABCD bits configuration table for E1. It contains A/B/C/D bits handling objects, one entry per CAS group on an E1 interface. ::= { ccasGrpABCDObjects 1 } SYNTAX CcasGrpABCDCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the custom ABCD configuration table for each CAS Group on an E1 interface. The entry is created when a CAS group is configured on a E1. The entry is deleted when the CAS Group is de-configured from E1. INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasGrpABCDCfgTable 1 } CcasGrpABCDCfgEntry ::= SEQUENCE { ccasGrpABCDCfgInvertBits BITS, ccasGrpABCDCfgUnusedBits BITS } SYNTAX BITS { dBit (0), cBit (1), bBit (2), aBit (3) } MAX-ACCESS read-write STATUS current DESCRIPTION Specify the A/B/C/D bit mask to invert the A/B/C/D bits value before the A/B/C/D bits are sent or after the A/B/C/D bits are received. 1-bit - enable bit inversion. 0-bit - disable bit inversion. The default value of this object is '00'H. ::= { ccasGrpABCDCfgEntry 1 } SYNTAX BITS { dBit (0), cBit (1), bBit (2), aBit (3) } MAX-ACCESS read-write STATUS current DESCRIPTION Specify the Unused A/B/C/D bit values to transmit. If any A/B/C/D bit is unused, the bit values in this object will be used to transmit for the unused A/B/C/D bits. The default value of this object is '00'H ::= { ccasGrpABCDCfgEntry 2 } --*********************************************************************** -- The CAS channel Standard Configuration Table --*********************************************************************** SYNTAX SEQUENCE OF CcasChannelCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The CAS channel Standard Configuration Table. It contains the standard configuration information of CAS channel of T1/E1. ::= { ccasChannelObjects 1 } SYNTAX CcasChannelCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the configuration table for each CAS channel. The entry is created when a CAS channel is configured on a T1/E1 via configuration command. The entry is deleted when the CAS channel is de-configured from T1/E1. INDEX { ifIndex } ::= { ccasChannelCfgTable 1 } CcasChannelCfgEntry ::= SEQUENCE { ccasChannelCfgDS1IfIndex InterfaceIndex, ccasChannelCfgGroup Integer32, ccasChannelCfgTimeSlot Integer32, ccasChannelCfgBusyOut TruthValue } SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION the ifIndex of this CAS channel associated T1/E1. ::= { ccasChannelCfgEntry 1 } SYNTAX Integer32 (0..30) MAX-ACCESS read-only STATUS current DESCRIPTION The CAS channel associated CAS group number. ::= { ccasChannelCfgEntry 2 } SYNTAX Integer32(1..31) MAX-ACCESS read-only STATUS current DESCRIPTION The CAS channel associated T1/E1 timeslot.