With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.
cc6kxbarSysCapPfcOperMode
Cisco Catalyst 6000 Crossbar Sys Capacity Pfc Operation Mode
1.3.6.1.4.1.9.9.217.1.7.1
Indicates the operating mode of the policy feature card (PFC). unknown -- unknown. pfc3a -- Policy feature card 3A. pfc3b -- Policy feature card 3B. pfc3bxl -- Policy feature card 3B XL. pfc3cst1 -- Policy feature card 3C ST1. pfc3cxlst1 -- Policy feature card 3C XL ST1. pfc3c -- Policy feature card 3C. pfc3cxl -- Policy feature card 3C XL. pfc4 -- Policy feature card 4. pfc4xl -- Policy feature card 4 XL. ::= { cc6kxbarSystemCapacityObjects 1 } SYNTAX SEQUENCE OF Cc6kxbarSysCapSwitchResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A cc6kxbarSysCapSwitchResTable entry lists the capacity information of the switching resources for ENTITY-MIB entPhysicalTable entries of manageable components with type entPhysicalClass module(9). ::= { cc6kxbarSystemCapacityObjects 2 } SYNTAX Cc6kxbarSysCapSwitchResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A cc6kxbarSysCapSwitchResEntry entry lists the capacity information of the switching resources for ENTITY-MIB entPhysicalTable entries of manageable components with type entPhysicalClass module(9). Entries are created by the agent at the system power-up or module insertion. Entries are deleted by the agent upon module removal. INDEX { entPhysicalIndex } ::= { cc6kxbarSysCapSwitchResTable 1 } Cc6kxbarSysCapSwitchResEntry ::= SEQUENCE { cc6kxbarSysCapSwitchResSeries INTEGER, cc6kxbarSysCapSwitchResCefMode INTEGER } SYNTAX INTEGER { unknown(1), supervisor(2), classic(3), fabric(4), dcef720(5), cef720(6), dcef256(7), cef256(8) } MAX-ACCESS read-only STATUS current DESCRIPTION Indicates the module series for traffic forwarding options. unknown -- unknown. supervisor -- supervisor module. classic -- classic module. fabric -- fabric module. dcef720 -- dCEF720 module. cef720 -- CEF720 module. dcef256 -- dCEF256 module. cef256 -- CEF256 module. ::= { cc6kxbarSysCapSwitchResEntry 1 } SYNTAX INTEGER { notApplicable(1), dcef(2), cef(3) } MAX-ACCESS read-only STATUS current DESCRIPTION Indicates the Cisco Express Forwarding (CEF) mode of the module. notApplicable -- not applicable for this module. dcef -- distributed CEF. cef -- CEF. ::= { cc6kxbarSysCapSwitchResEntry 2 } -- Fabric Error Recovery Objects SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION Specifies the threshold on fabric link errors occurring in a channel for the fabric error recovery feature.
Back to CISCO-CAT6K-CROSSBAR-MIB. MIB page.
IPHost Network monitor allows you to monitor cc6kxbarSysCapPfcOperMode on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco routers right now.