cic Service Repeat Owner

1.3.6.1.4.1.9.9.9968.1.1.1.1.5

This object is used for error checking of the operation specified in 'cicServiceRepetition'. The value of this object is set by the SNMP manager with its own identifier at the same time as issuing the bulk operation by setting 'cicServiceRepetition'. This object and 'cicServiceRepetition' need to be in the same SNMP SET PDU. Later on, the SNMP manager should check the value of this object, if it is same as the name previously set, then the value of 'cicServiceRepeatResult' indicates the result of the bulk operation initiated by this SNMP manager. In the case that a SNMP manager do multi bulk operation, it is recommended that the SNMP manager choose to set this value to its IP Address so as to be unique. ::= { cicServiceEntry 5 } SYNTAX BulkConfigResult MAX-ACCESS read-only STATUS current DESCRIPTION This object is used for error checking of the operation specified in cicServiceRepetition. This object indicates the result of the bulk operation initiated by the SNMP manager specified in the value of 'cicServiceRepeatOwner'. ::= { cicServiceEntry 6 } -- ********************************************************************* -- Conformance -- ********************************************************************* cicServiceCompliances OBJECT IDENTIFIER ::= { ciscoIfCallServiceMIBConformance 1} cicServiceGroups OBJECT IDENTIFIER ::= { ciscoIfCallServiceMIBConformance 2} -- -- Conformance and compliance statements statements -- cicServiceCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION The compliance statement for interfaces which implement the CISCO-IF-CALL-SERVICE-MIB.