With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.
cpvlanPromPortSecondaryRemap3k
cpvlan Promiscuous Port Secondary Remap3k
1.3.6.1.4.1.9.9.173.1.2.2.1.4
A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. A bit can only be set to '1' when the bit is corresponding to a VLAN of Private VLAN isolated or community type which has already been associated with a primary VLAN. Setting this bit to '1' makes this promiscuous port remap the secondary VLAN to its associated primary VLAN for egress traffic on the fly, or remap the associated primary VLAN to the secondary VLAN if the secondary VLAN is of twoWayCommunity type and the object value of cpvlanPromPortTwoWayRemapCapable for this promiscuous port is true(1). Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095.
Back to CISCO-PRIVATE-VLAN-MIB MIB page.
IPHost Network monitor allows you to monitor cpvlanPromPortSecondaryRemap3k on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.