With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.
zoneMemberID
zone Member ID
1.3.6.1.4.1.9.9.294.1.1.11.1.5
This object represents the zone/alias member ID. The interpretation of this object depends on the zoneMemberFormat object. If the value of corresponding instance of zoneMemberFormat object is 'wwn', then this object holds an 8 octet long Port WWN. If the value of corresponding instance of zoneMemberFormat object is 'domainPort', then this object contains a 2 octet value. The first octet will represent the domain and the second octet will represent the port. If the value of the corresponding instance of zoneMemberFormat object is 'fcAddr', then this object contains the 3 octet N_Port FC-ID. If the value of the corresponding instance of zoneMemberFormat object is 'fwwn', then this object contains the 8 octet Fabric Port WWN. If the value of the corresponding instance of zoneMemberFormat object is 'symNodeName', then this object contains a symbolic node name which could be of length 1 to 255 bytes. If the value of corresponding instance of zoneMemberFormat object is 'intf', then this object will contain a 12 octet value which is a concatenation of 4 octets containing an interface index (ifIndex) encoded in network byte order, and 8 octets containing the WWN of a switch. If the value of corresponding instance of zoneMemberFormat object is 'domainIntf', then this object will contain a 5 octet value which is a concatenation of 1 octet representing the domain and 4 octets representing an interface index (ifIndex) encoded in network byte order. If the value of corresponding instance of zoneMemberFormat object is 'ipAddr', then this object will contain a 4 octet IP address value followed by an optional 4 octets of subnet mask. If the value of corresponding instance of zoneMemberFormat object is 'ipAddrv6', then this object will contain a 16 octet IPv6 address value followed by an optional 4 octets of prefix length encoded in network byte order. If the value of the corresponding instance of zoneMemberFormat object is 'deviceAlias', then this object contains a Device Alias which could be of length 1 to 64 bytes. This object cannot be modified while the corresponding value of zoneMemberRowStatus object is 'active'.
Back to CISCO-ZS-MIB MIB page.
IPHost Network monitor allows you to monitor zoneMemberID on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.