With IPHost Network Monitor you can run simple snmp requests against a D-Link device in your network.
swSredCtrlDropRateLow
Switch Sred Control Dropped Rate Low
1.3.6.1.4.1.171.12.51.3.1.1.5
This object indicates the probabilistic drop rate if above the low threshold. There are eight drop rates: 1 100% 2 6.25% 3 3.125% 4 1.5625% 5 0.78125% 6 0.390625% 7 0.1953125% 8 0.09765625% DEFVAL { 1 } ::= { swSredCtrlEntry 5 } SYNTAX INTEGER (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION This object indicates the probabilistic drop rate if above the high threshold. There are eight drop rates: 1 100% 2 6.25% 3 3.125% 4 1.5625% 5 0.78125% 6 0.390625% 7 0.1953125% 8 0.09765625% DEFVAL { 1 } ::= { swSredCtrlEntry 6 } SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION This object indicates the drop green state. Setting this state to be disabled means probabilistic drop red colored packets if the queue depth is above the low threshold, and probabilistic drop yellow colored packets if the queue depth is above the high threshold. Setting this state to be enabled means probabilistic drop yellow and red colored packets if the queue depth is above the low threshold, and probabilistic drop green colored packets if the queue depth is above the high threshold.
Back to SRED-MIB MIB page.
IPHost Network monitor allows you to monitor swSredCtrlDropRateLow on D-Link device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring D-Link VPN routers right now.