icfVgPortLastTrainConfig - HP ICF Vg Port Last Train Config - hpprocurve-icfvg

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a HP device in your network.

icfVgPortLastTrainConfig

HP ICF Vg Port Last Train Config
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.9

This 16 bit field contains the most recent training configuration in an error-free training frame sent by the end node connected to the port. For cascade ports, this is the responder's configuration field from the most recent error-free training response frame received in response to training initiated by this repeater. This object is formatted as follows: First Octet: Second Octet: 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ |v|v|v|0|0|0|0|0| |0|0|0|F|F|P|P|R| +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ vvv: The version of the 802.12 training protocol with which the training initiator is compliant FF: 00 = frameType88023 is requested 01 = frameType88025 is requested 10 = reserved 11 = either frameType88023 or frameType88025 is acceptable PP: 00 = request singleAddressMode 01 = request promiscuousMode 10 = reserved 11 = reserved R: 0 = request is from an end node 1 = request is from a repeater

Back to hpprocurve-icfvg MIB page.

IPHost Network monitor allows you to monitor icfVgPortLastTrainConfig on Hewlett Packard device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

MIBs list