SNMP OIDs - authentication_timeout
The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for authentication timeout
- ap Authentication Timeout
- apAuthenticationTimeout 1.3.6.1.4.1.52.4.13.12.2.1.6 (defined in ctron-ap3000-mib)
This value indicates the Timeout value(sec) used by the authentication server. - apv MAC Authentication Timeout
- apvMACAuthenticationTimeout 1.3.6.1.4.1.52.4.13.12.4.1.7 (defined in ctron-ap3000-mib)
The number (in minutes) between forcing RADIUS MAC to authenticate. - enterasys Dot1x Authentication Supp Timeout
- etsysDot1xAuthSuppTimeout 1.3.6.1.4.1.5624.1.2.18.1.2.1.2.1.9 (defined in enterasys-8021x-extensions-mib)
The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. - enterasys Dot1x Authentication Server Timeout
- etsysDot1xAuthServerTimeout 1.3.6.1.4.1.5624.1.2.18.1.2.1.2.1.10 (defined in enterasys-8021x-extensions-mib)
The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. - Enterasys Encrypted Dot1x Authentication Supp Timeout
- etsysEncrDot1xAuthSuppTimeout 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.5 (defined in enterasys-encr-8021x-config-mib)
An encrypted octet string containing The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. Alternately, the default value (for ports that use station-based access control, and that therefore may support many virtual PAEs). The data type is 1, Integer32. - Enterasys Encrypted Dot1x Authentication Server Timeout
- etsysEncrDot1xAuthServerTimeout 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.6 (defined in enterasys-encr-8021x-config-mib)
An encrypted octet string containing The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. Alternately, the default value (for ports that use station-based access control, and that therefore may support many virtual PAEs). The data type is 1, Integer32. - Enterasys Firewall Authentication Timeout
- etsysFWAuthTimeout 1.3.6.1.4.1.5624.1.2.37.1.5 (defined in enterasys-firewall-mib)
Firewalls can be configured to only allow packets from IP addresses that have been authenticated. An authenticated IP address will need to re-authenticate if there is no traffic from that address for the period specified by this object. - Enterasys Multi Authentication Session Timeout
- etsysMultiAuthSessionTimeout 1.3.6.1.4.1.5624.1.2.46.1.1.8.1.2 (defined in enterasys-multi-auth-mib)
The maximum number of seconds an authenticated session may last before termination of the session. A value of zero indicates that no session timeout will be applied. This value MAY be superseded by a session timeout value provided by the authenticating server. For example, if a session is authenticated by a RADIUS server, that server may encode a Session-Timeout Attribute in its authentication response. The operational timeout value of a given authenticated session is specified by the etsysMultiAuthSessionSessionTimeout object. - Enterasys Multi Authentication Idle Timeout
- etsysMultiAuthIdleTimeout 1.3.6.1.4.1.5624.1.2.46.1.1.8.1.3 (defined in enterasys-multi-auth-mib)
The maximum number of consecutive seconds an authenticated session may be idle before termination of the session. A value of zero indicates that no idle timeout will be applied. This value MAY be superseded by a idle timeout value provided by the authenticating server. For example, if a session is authenticated by a RADIUS server, that server may encode a Idle-Timeout Attribute in its authentication response. The operational idle timeout value of a given authenticated session is specified by the etsysMultiAuthSessionIdleTimeout object. - Enterasys Multi Authentication Session Session Timeout
- etsysMultiAuthSessionSessionTimeout 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.10 (defined in enterasys-multi-auth-mib)
The maximum number of seconds this session may last before automatic termination. A value of zero indicates that no session timeout will be applied. This value MAY be provided by the etsysMultiAuthSessionTimeout object or by the authenticating server. - Enterasys Multi Authentication Session Idle Timeout
- etsysMultiAuthSessionIdleTimeout 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.11 (defined in enterasys-multi-auth-mib)
The maximum number of consecutive seconds this session may be idle before automatic termination. A value of zero indicates that no idle timeout will be applied. This value MAY be provided by the etsysMultiAuthIdleTimeout object or by the authenticating server. - Enterasys Multi Authentication Timeout Group
- etsysMultiAuthTimeoutGroup 1.3.6.1.4.1.5624.1.2.46.2.1.9 (defined in enterasys-multi-auth-mib)
The group of objects for all devices that support timing out Multiple Authentication sessions. - Enterasys Radius Authentication Client Retry Timeout Encrypt
- etsysRadiusAuthClientRetryTimeoutEncrypt 1.3.6.1.4.1.5624.1.2.5.1.1 (defined in enterasys-radius-auth-client-encrypt-mib)
The number of seconds to wait for a RADIUS Server to respond to a request. This parameter value is maintained across system reboots. This object's true data type is 1, Integer32. - Enterasys Radius Authentication Client Retry Timeout
- etsysRadiusAuthClientRetryTimeout 1.3.6.1.4.1.5624.1.2.4.1.1 (defined in enterasys-radius-auth-client-mib)
The number of seconds to wait for a RADIUS Server to respond to a request. Maintaining the value of this object across agent reboots is REQUIRED. - Enterasys Radius Authentication Client Server Timeout
- etsysRadiusAuthClientServerTimeout 1.3.6.1.4.1.5624.1.2.4.1.5.1.10 (defined in enterasys-radius-auth-client-mib)
The number of seconds to wait for a RADIUS Server to respond to a request. A value of -1 indicates that the server timeout specified by etsysRadiusAuthClientRetryTimeout should be used for this server. Maintaining the value of this object across agent reboots is REQUIRED. - bsn Radius Authentication Server Retransmit Timeout
- bsnRadiusAuthServerRetransmitTimeout 1.3.6.1.4.1.14179.2.5.1.1.17 (defined in AIRESPACE-WIRELESS-MIB)
Time in seconds after which a radius authentication request will timeout and a retransmission will be taken up by the switch. - Cisco Authentication Framework Port Inactivity Timeout
- cafPortInactivityTimeout 1.3.6.1.4.1.9.9.656.1.2.1.1.9 (defined in CISCO-AUTH-FRAMEWORK-MIB)
Specifies the period of time that a client associating with this port is allowed to be inactive before being terminated. A value of zero indicates that inactivity timeout is disabled on this port. A value of -1 indicates that inactivity timeout is downloaded from the AAA server when this port is authenticated. - Cisco Authentication Framework Session Timeout
- cafSessionTimeout 1.3.6.1.4.1.9.9.656.1.4.1.1.15 (defined in CISCO-AUTH-FRAMEWORK-MIB)
Indicates the session timeout used by Authentication Framework in the authentication session. - Cisco Authentication Framework Session Timeout Action
- cafSessionTimeoutAction 1.3.6.1.4.1.9.9.656.1.4.1.1.17 (defined in CISCO-AUTH-FRAMEWORK-MIB)
Indicates the timeout action on the authentication session, when value of the corresponding instance of cafSessionTimeLeft reaches zero. unknown : None of the below. terminate : Session will be terminated. reauthenticate: Session will be reauthenticated. - Cisco Authentication Framework Session Inactivity Timeout
- cafSessionInactivityTimeout 1.3.6.1.4.1.9.9.656.1.4.1.1.18 (defined in CISCO-AUTH-FRAMEWORK-MIB)
Indicates the inactivity timeout used by Authentication Framework in the authentication session. - Juniper Pae Authentication Config Server Timeout
- jnxPaeAuthConfigServerTimeout 1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.11 (defined in JUNIPER-PAE-EXTENSION-MIB)
This object specifies Authentication server timeout interval on the specified PAE port. - Juniper Pae Authentication Config Supp Timeout
- jnxPaeAuthConfigSuppTimeout 1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.12 (defined in JUNIPER-PAE-EXTENSION-MIB)
This object specifies Time to wait for a client response on the specified PAE port. - Switch AAC Authentication Param Response Timeout
- swAACAuthParamResponseTimeout 1.3.6.1.4.1.171.12.5.8.1 (defined in AAC)
Timeout in second for login authentication response. - Cisco Port Access Entity Mac Authentication Bypass Re Authentication Timeout
- cpaeMacAuthBypassReAuthTimeout 1.3.6.1.4.1.9.9.220.1.8.1 (defined in CISCO-PAE-MIB)
Specifies the waiting time before reauthentication is triggered on all MAC Auth-bypass authenticated ports. - Cisco Port Access Entity Mac Authentication Bypass Shutdown Timeout
- cpaeMacAuthBypassShutdownTimeout 1.3.6.1.4.1.9.9.220.1.8.4 (defined in CISCO-PAE-MIB)
Specifies time before a port is auto-enabled after being shutdown due to a MAC Auth-bypass security violation. - Cisco Port Access Entity Mac Authentication Bypass Authentication Fail Timeout
- cpaeMacAuthBypassAuthFailTimeout 1.3.6.1.4.1.9.9.220.1.8.5 (defined in CISCO-PAE-MIB)
Specifies the time a MAC Auth-bypass unauthenticated port waits before trying the authentication process again. - Cisco Port Access Entity Web Authentication Un Authentication State Timeout
- cpaeWebAuthUnAuthStateTimeout 1.3.6.1.4.1.9.9.220.1.9.10 (defined in CISCO-PAE-MIB)
The authentication timeout period for Web Proxy Authentication. Once a host enters 'initialize' state as indicated by its corresponding cpaeWebAuthHostState, such host will be removed if it can not be authenticated within the timeout period. - Cisco Port Access Entity Web Authentication Un Authentication Timeout Group
- cpaeWebAuthUnAuthTimeoutGroup 1.3.6.1.4.1.9.9.220.2.2.40 (defined in CISCO-PAE-MIB)
A collection of object(s) that provides configuration and information about Init State Timeout of Web Proxy Authentication. - fg Fw User Authentication Timeout
- fgFwUserAuthTimeout 1.3.6.1.4.1.12356.101.5.2.1.2 (defined in FORTINET-FORTIGATE-MIB)
Idle period after which a firewall-authentication user's session is automatically expired - NETSCREEN Set Authentication Configure Connection Idle Timeout
- nsSetAuthCfgConnIdleTimeout 1.3.6.1.4.1.3224.7.2.1.1.3 (defined in NETSCREEN-SET-AUTH-MIB)
connection timeout threshold setting - NETSCREEN Set Authentication Configure Sec Cli Timeout
- nsSetAuthCfgSecCliTimeout 1.3.6.1.4.1.3224.7.2.1.1.10 (defined in NETSCREEN-SET-AUTH-MIB)
SecureID client timeout threshold. - atr Dot1x Authentication Supp Timeout
- atrDot1xAuthSuppTimeout 1.3.6.1.4.1.207.8.4.4.4.118.1.1.2.1.1.9 (defined in AT-PAE-MIB)
The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. - atr Dot1x Authentication Server Timeout
- atrDot1xAuthServerTimeout 1.3.6.1.4.1.207.8.4.4.4.118.1.1.2.1.1.10 (defined in AT-PAE-MIB)
The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. - sys Pnac AS User Config Authentication Timeout
- sysPnacASUserConfigAuthTimeout 1.3.6.1.4.1.207.1.4.167.64.3.1.1.4 (defined in AT-GS950-8-MIB)
The time in seconds after which the Authentication offerred to the User ceases. Maximum value of the object can be 7200 seconds. When the object value is 0, the ReAuthPeriod of the Authenticator port is used by Authenticator. - dot1x Authentication Supp Timeout
- dot1xAuthSuppTimeout 1.0.8802.1.1.1.1.2.1.1.9 (defined in IEEE8021-PAE-MIB)
The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. - dot1x Authentication Server Timeout
- dot1xAuthServerTimeout 1.0.8802.1.1.1.1.2.1.1.10 (defined in IEEE8021-PAE-MIB)
The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. - Cisco LWAPP Local Authentication Active Timeout
- cllaActiveTimeout 1.3.6.1.4.1.9.9.619.1.1.1.1 (defined in CISCO-LWAPP-LOCAL-AUTH-MIB)
The timeout period for the Local EAP to remain active, in seconds.