The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for connection operation
- atmx Ces Virtual Channel Connection Operation Status
- atmxCesVccOperStatus 1.3.6.1.4.1.800.2.4.10.1.2.1.1.9 (defined in XYLAN-ATM-CE-MIB)
The current operational state of this virtual circuit. - atmx Virtual Channel Connection Operation Status
- atmxVccOperStatus 1.3.6.1.4.1.800.2.4.5.1.1.8 (defined in XYLAN-ATM-MIB)
The actual operational status of the VCC A value of end2endUp(2) or end2endDown(3) would be used if end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used. - Xylan ATM Soft P Virtual Channel Connection Operation Status
- xylnatmSoftPVccOperStatus 1.3.6.1.4.1.800.2.9.2.1.5.1.12 (defined in XYLAN-SOFT-PVC-MIB)
Describes the status of the Soft PVCC. When the row is not 'active', the value of this object is 'other'. - Cabletron DLSw T Connection Operation Status
- ctdlswTConnOperStatus 1.3.6.1.4.1.52.4.1.2.8.4.1.1.4 (defined in ctron-dlsw-mib)
Indicates the status of this transport connection. - port Bsci Operation Activate Connection Without Poll
- portBsciOperActivateConnectionWithoutPoll 1.3.6.1.4.1.173.7.3.4.2.1.29 (defined in netlink-specific-mib)
TPAD connection without a poll of the connected device. - bsci Subscr Operation Connection ID
- bsciSubscrOperConnectionID 1.3.6.1.4.1.173.7.3.4.4.1.7 (defined in netlink-specific-mib)
configured in the BSCI Devices Table. - bsci Device Operation Connection ID
- bsciDevOperConnectionID 1.3.6.1.4.1.173.7.3.4.6.1.3 (defined in netlink-specific-mib)
The BSCI port connection ID for the device. - Cisco ATM Forum Virtual Channel Connection Operation Status
- atmfVccOperStatus 1.3.6.1.4.1.353.2.5.1.1.4 (defined in ATM-FORUM-MIB)
The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end to end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used. - Cisco Channel Interface Processor Transmission Groups Llc Operation Remote Connection Token
- cipTgLlcOperRemoteConnToken 1.3.6.1.4.1.9.9.73.1.1.2.1.14 (defined in CISCO-CIPTG-MIB)
The host's token/handle for this CMPC+ TG APPN connection. This token is extracted from the APPN connection activation message received from the host. - Cisco Channel Interface Processor Transmission Groups Ip Operation Local Connection Token
- cipTgIpOperLocalConnToken 1.3.6.1.4.1.9.9.73.1.2.2.1.3 (defined in CISCO-CIPTG-MIB)
The CMCC's token/handle for this CMPC+ TG IP connection. This token is included in the IP connection activation message sent to the host. - Cisco Channel Interface Processor Transmission Groups Cmgr Operation Remote Connection Token
- cipTgCmgrOperRemoteConnToken 1.3.6.1.4.1.9.9.73.1.3.1.1.8 (defined in CISCO-CIPTG-MIB)
The host's token/handle for this CMPC+ TG Cmgr connection. This token is extracted from the Cmgr connection activation message received from the host. - Cisco Channel Interface Processor Transmission Groups Cmgr Operation Connection Status
- cipTgCmgrOperConnStatus 1.3.6.1.4.1.9.9.73.1.3.1.1.10 (defined in CISCO-CIPTG-MIB)
Activation state of the CMPC+ TG Connection Manager connection. reset - Awaiting Cmgr Connection Request from the host. active - A Cmgr Connection Request has been receive from the host and CMCC has returned Cmgr Connection Request to the host. The Cmgr connection is now active. - cisco Data Link Switching T Connection Operation T Domain
- ciscoDlswTConnOperTDomain 1.3.6.1.4.1.9.10.9.1.2.3.1.1 (defined in CISCO-DLSW-MIB)
The object identifier indicates the transport domain of this transport connection. - cisco Data Link Switching T Connection Operation Partner NB Info
- ciscoDlswTConnOperPartnerNBInfo 1.3.6.1.4.1.9.10.9.1.2.3.1.16 (defined in CISCO-DLSW-MIB)
It is up to this DSLw whether to keep either none, some, or all of the NetBIOS name list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are stored as userConfigured remote entries in ciscoDlswDirNBTable. A value of (4), notApplicable, should be returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep ciscoDlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. - cisco Data Link Switching T Connection Operation Disconnect Active Cir
- ciscoDlswTConnOperDiscActiveCir 1.3.6.1.4.1.9.10.9.1.2.3.1.20 (defined in CISCO-DLSW-MIB)
The number of circuits active (not in DISCONNECTED state) at the time the transport connection was last disconnected. This value is zero if the transport connection has never been connected. - cisco Data Link Switching T Connection Operation In Data Octets
- ciscoDlswTConnOperInDataOctets 1.3.6.1.4.1.9.10.9.1.2.3.1.23 (defined in CISCO-DLSW-MIB)
The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is counted starting with the first octet following the SSP message header. - cisco Data Link Switching T Connection Operation Cir Creates
- ciscoDlswTConnOperCirCreates 1.3.6.1.4.1.9.10.9.1.2.3.1.35 (defined in CISCO-DLSW-MIB)
The number of times that circuits entered `circuit_established' state (not counting transitions from `circuit_restart'). - cisco Data Link Switching T Connection Operation Group
- ciscoDlswTConnOperGroup 1.3.6.1.4.1.9.10.9.3.2.5 (defined in CISCO-DLSW-MIB)
- Cisco DLSW T Connection Operation Table
- cdeTConnOperTable 1.3.6.1.4.1.9.9.74.1.3.2 (defined in CISCO-DLSW-EXT-MIB)
A list of peer transport connections. Each connected peer will create a conceptual row in the table. When the peer disconnects, the row will be deleted from the table. This table augments dlswTConnOperTable. - Cisco DLSW T Connection Operation Partner Border Peer
- cdeTConnOperPartnerBorderPeer 1.3.6.1.4.1.9.9.74.1.3.2.1.3 (defined in CISCO-DLSW-EXT-MIB)
This variable indicates if the partner DLSw is capable of operating as a border peer, as received through capabilities exchange. True indicates that it is capable, false indicates that it is not. Border peers form peer connections with every router in their group and with border peers in other groups. The role of a border peer is to forward explorers on behalf of other DLSw routers. - Cisco DLSW T Connection Operation Partner Group Number
- cdeTConnOperPartnerGroupNum 1.3.6.1.4.1.9.9.74.1.3.2.1.4 (defined in CISCO-DLSW-EXT-MIB)
This variable indicates the partner's group number, as received through capabilities exchange. Peer groups are arbitrary groups of routers with one or more designated border peers. Border peers form peer connections with every router in their group and with border peers in other groups. The role of a border peer is to forward explorers on behalf of other routers. A value of zero means no group has been set and the DLSw is not a group member. - Cisco DLSW MIBT Connection Operation Group
- cdeMIBTConnOperGroup 1.3.6.1.4.1.9.9.74.3.2.3 (defined in CISCO-DLSW-EXT-MIB)
Conformance group for operation information for transport connections. - Cisco Ethernet Virtual Connection Evc Operation Status
- cevcEvcOperStatus 1.3.6.1.4.1.9.9.613.1.3.2.1.1 (defined in CISCO-EVC-MIB)
This object specifies the operational status of the EVC: 'unknown' Not enough information available regarding the EVC to determine the operational status at this time or EVC operational status is undefined. 'active' Fully operational between the UNIs in the EVC. 'partiallyActive' Capable of transferring traffic among some but not all of the UNIs in the EVC. This operational status is applicable only for Multipoint-to-Multipoint EVCs. 'inactive' Not capable of transferring traffic among any of the UNIs in the EVC. This value is derived from data gathered by underlying OAM protocol. - Cisco Ethernet Virtual Connection SI Operation Status
- cevcSIOperStatus 1.3.6.1.4.1.9.9.613.1.4.2.1.1 (defined in CISCO-EVC-MIB)
This object indicates the operational status of the Service Instance. 'up' Service instance is fully operational and able to transfer traffic. 'down' Service instance is down and not capable of transferring traffic, and is not administratively configured to be down by management system. 'adminDown' Service instance has been explicitly configured to administratively down by a management system and is not capable of transferring traffic. 'deleted' Service instance has been deleted. 'errorDisabled' Service instance has been shut down due to MAC security violations. 'unknown' Operational status of service instance is unknown or undefined. - ibmdlsw T Connection Group Operation Table
- ibmdlswTConnGroupOperTable 1.3.6.1.4.1.2.6.119.4.3.1 (defined in ibm-ibmiroc)
Information about multicast groups of which this DLSw is currently a member. - ibmdlsw T Connection Group Operation Config Index
- ibmdlswTConnGroupOperConfigIndex 1.3.6.1.4.1.2.6.119.4.3.1.1.4 (defined in ibm-ibmiroc)
The value of dlswTConnConfigIndex of the dlswTConnConfigEntry that governs the configuration information used by this ibmdlswTConnGroupOperEntry. A management station can therefore normally examine both configured and operational information for this multicast group. - ibmdlsw T Connection Group Operation In Сontrol Packets
- ibmdlswTConnGroupOperInCntlPkts 1.3.6.1.4.1.2.6.119.4.3.1.1.9 (defined in ibm-ibmiroc)
The number of Switch-to-Switch Protocol (SSP) messages received for this group which were not of type DATAFRAME. - ibmdlsw T Connection Group Operation N Qex Sents
- ibmdlswTConnGroupOperNQexSents 1.3.6.1.4.1.2.6.119.4.3.1.1.15 (defined in ibm-ibmiroc)
The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent for this group.
