The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port limit
- Sys Bridge Port Rate Limit Receive State
- a3ComSysBridgePortRateLimitReceiveState 1.3.6.1.4.1.43.29.4.10.3.1.33 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object returns the bmfrl state of the port enabled(1) - port is up disabled(2) - port is down, but not as a result of BMFRL bmfrl-disabled(3) - port was disabled by rate limit software - Sys Bridge Port Address Max Limit
- a3ComSysBridgePortAddressMaxLimit 1.3.6.1.4.1.43.29.4.10.3.1.35 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object controls the maximum number of unicast addresses that can be learned or configured on a port. This value is set on a per port basis. The value can't be set lower than the current number of addresses on a port. - Sys Bridge Port Receive Multicast Limit
- a3ComSysBridgePortReceiveMulticastLimit 1.3.6.1.4.1.43.29.4.10.3.1.4 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
This variable limits the number of multicast frames forwarded by this port over a 1 second interval. The minimum threshold limit may vary between platforms, but can be determined by multiplying this value by the a3ComSysBridgePortReceiveMulticastLimitMultiplier value. For example if this value equals 2, and the a3ComSysBridgePortReceiveMulticastLimitMultiplier equals 1000 then no more than 2000 multicast frames per second will be forwarded by this port. The default value for this object is zero which an infinite rate. - ima Port Gain Limit
- imaPortGainLimit 1.3.6.1.4.1.43.1.12.3.1.1.19.2.1.1.5 (defined in 3comab9300)
This object indicates the Line Gain Limit configured for the port. - rate Limit Port Entry
- rateLimitPortEntry 1.3.6.1.4.1.52.4.12.30.1.16.1.2.1 (defined in ZYXEL-ES2108G-MIB)
An entry in rateLimitPortTable. - rate Limit Port Entry
- rateLimitPortEntry 1.3.6.1.4.1.52.4.12.30.1.16.1.2.1 (defined in ZYXEL-ES2108-MIB)
An entry in rateLimitPortTable. - rate Limit Port Entry
- rateLimitPortEntry 1.3.6.1.4.1.52.4.12.30.1.16.1.2.1 (defined in ZYXEL-GS2024-MIB)
An entry in rateLimitPortTable. - rate Limit Port Entry
- rateLimitPortEntry 1.3.6.1.4.1.52.4.12.30.1.16.1.2.1 (defined in ZYXEL-GS4012F-MIB)
An entry in rateLimitPortTable. - sfcs Bandwidth Port Pool Limits CBR Limit Forward
- sfcsBwPortPoolLimitsCBRLimitFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.7 (defined in ctron-sfcs-mib)
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Limits ABR Limit Forward
- sfcsBwPortPoolLimitsABRLimitFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.9 (defined in ctron-sfcs-mib)
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Limits VBR Limit Forward
- sfcsBwPortPoolLimitsVBRLimitFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.11 (defined in ctron-sfcs-mib)
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. PNNI establishes VBR connections for switch to switch communications. If an arbitrarily low limit is established, it may preclude PNNI inter-switch operability. - sfcs Bandwidth Port Pool Limits UBR Connection Limit Forward
- sfcsBwPortPoolLimitsUBRConnLimitFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.15 (defined in ctron-sfcs-mib)
A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value will be -1.) - rate Limit Port Entry
- rateLimitPortEntry 1.3.6.1.4.1.52.4.12.30.1.16.1.2.1 (defined in v2h124-24-mib)
Entry for rate limit of each port. - rl Port Input Limit
- rlPortInputLimit 1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.2 (defined in v2h124-24-mib)
second. For a 100 Mb/s port, the range is 1 to 100. For a 1000 Mb/s port, the range is 1 to 1000. - Enterasys Pse Port Power Limit
- etsysPsePortPowerLimit 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.1 (defined in enterasys-power-ethernet-mib-ext-mib)
This object sets the maximum power allowed on this port. If the port exceeds its power limit, it will be shut down. This object has effect only when its module is in realtime mode (specified by etsysPseModulePowerMode). In class mode, the power limit of a port is defined by port's class upper bound, according to the IEEE standard selected in etsysPsePortCapabilitySelect.
