The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for switching status
- Cisco ATM Switching Fabric Traffic Description Row Status
- casfTrafficDescrRowStatus 1.3.6.1.4.1.9.9.112.1.1.1.1.8 (defined in CISCO-ATM-SWITCH-FR-IWF-MIB)
Used to create, delete and modify this row. None of the columnar values (other than this one) can be modified while the row is active. - Cisco ATM Switching Fabric Vc Endpoint Received Sig Status
- casfVcEndptRcvdSigStatus 1.3.6.1.4.1.9.9.112.1.2.1.1.18 (defined in CISCO-ATM-SWITCH-FR-IWF-MIB)
The value of this object identifies the PVC status received via the local in-channel signaling procedures for this PVC end-point. This object is only pertinent for interfaces that perform the bidirectional procedures. For user-to-network network side procedures, the value of this object should be none(4). - Cisco ATM Switching Fabric Vc Endpoint Row Status
- casfVcEndptRowStatus 1.3.6.1.4.1.9.9.112.1.2.1.1.19 (defined in CISCO-ATM-SWITCH-FR-IWF-MIB)
Used to create, modify or delete this row. - Cisco ATM Switching Fabric Frame Relay Lmi Status Ins
- casfFrLmiStatusIns 1.3.6.1.4.1.9.9.112.1.3.1.1.12 (defined in CISCO-ATM-SWITCH-FR-IWF-MIB)
Number of Status messages received. - Cisco ATM Switching Fabric Frame Relay Lmi Status Outs
- casfFrLmiStatusOuts 1.3.6.1.4.1.9.9.112.1.3.1.1.13 (defined in CISCO-ATM-SWITCH-FR-IWF-MIB)
Number of Status messages sent. - Cisco ATM Switching Fabric Frame Relay Lmi Status Timeouts
- casfFrLmiStatusTimeouts 1.3.6.1.4.1.9.9.112.1.3.1.1.14 (defined in CISCO-ATM-SWITCH-FR-IWF-MIB)
Number of times when timeout occurred on waiting for Status message - Cisco ATM Switching Fabric Frame Relay Lmi Status Enq Timeouts
- casfFrLmiStatusEnqTimeouts 1.3.6.1.4.1.9.9.112.1.3.1.1.15 (defined in CISCO-ATM-SWITCH-FR-IWF-MIB)
Number of times when timeout occurred on waiting for Status Enquiry message - Cisco Catalyst 6000 Crossbar Switch Bus Switching Status
- cc6kxbarSwBusSwitchingStatus 1.3.6.1.4.1.9.9.217.1.4.1 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Indicates the current switching status of the switching bus on the system. normal -- the switching bus is under normal packet switching operation. stalled -- the switching bus has stopped packet switching but is still attached to the system, i.e., the switching bus is stalled. isolated -- the switching bus has stopped packet switching and is detached from the system, i.e., the switching bus is isolated. The object is only instantiated on systems which support switching bus switching detection feature. - cisco Data Link Switching Status
- ciscoDlswStatus 1.3.6.1.4.1.9.10.9.1.1.5 (defined in CISCO-DLSW-MIB)
The status of the DLSw part of the system. Changing the value from active to inactive causes DLSw to take the following actions - (1) it disconnects all circuits through all DLSw partners, (2) it disconnects all transport connections to all DLSw partners, (3) it disconnects all local DLC connections, and (4) it stops processing all DLC connection set-up traffic. Since these are destructive actions, the user should query the circuit and transport connection tables in advance to understand the effect this action will have. Changing the value from inactive to active causes DLSw to come up in its initial state, i.e., transport connections established and ready to bring up circuits. - cisco Data Link Switching T Connection Config Row Status
- ciscoDlswTConnConfigRowStatus 1.3.6.1.4.1.9.10.9.1.2.2.1.13 (defined in CISCO-DLSW-MIB)
This object is used by a Management Station to create or delete the row entry in the ciscoDlswTConnConfigTable following the RowStatus textual convention. The value of notInService will be used to take a conceptual row definition out of use. - cisco Data Link Switching If Row Status
- ciscoDlswIfRowStatus 1.3.6.1.4.1.9.10.9.1.3.1.1.1 (defined in CISCO-DLSW-MIB)
This object is used by a Management Station to create or delete the row entry in the ciscoDlswIfTable following the RowStatus textual convention. - cisco Data Link Switching Directory Mac Status
- ciscoDlswDirMacStatus 1.3.6.1.4.1.9.10.9.1.4.2.1.1.7 (defined in CISCO-DLSW-MIB)
This object specifies whether DLSw currently believes the MAC address to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a repeat of the search). - cisco Data Link Switching Directory Mac Row Status
- ciscoDlswDirMacRowStatus 1.3.6.1.4.1.9.10.9.1.4.2.1.1.9 (defined in CISCO-DLSW-MIB)
This object is used by a Management Station to create or delete the row entry in the ciscoDlswDirMacTable following the RowStatus textual convention. - cisco Data Link Switching Directory NB Status
- ciscoDlswDirNBStatus 1.3.6.1.4.1.9.10.9.1.4.2.2.1.7 (defined in CISCO-DLSW-MIB)
This object specifies whether DLSw currently believes the NetBIOS name to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a repeat of the search). - cisco Data Link Switching Directory NB Row Status
- ciscoDlswDirNBRowStatus 1.3.6.1.4.1.9.10.9.1.4.2.2.1.9 (defined in CISCO-DLSW-MIB)
This object is used by a Management Station to create or delete the row entry in the ciscoDlswDirNBTable following the RowStatus textual convention. - cisco Data Link Switching Sdlc Link Station Row Status
- ciscoDlswSdlcLsRowStatus 1.3.6.1.4.1.9.10.9.1.6.2.1.7 (defined in CISCO-DLSW-MIB)
This object is used by a Management Station to create or delete the row entry in the ciscoDlswSdlcLsTable following the RowStatus textual convention.
