The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for traffic rate
- Xylan ATM Traffic Shaper Configuration Sustained Cell Rate
- xylnatmTrafficShaperConfSCR 1.3.6.1.4.1.800.2.9.1.18.1.1.6 (defined in XYLAN-CSM-MIB)
This object is used to configure the Sustainable Cell Rate of a shaper. SCR is the average conforming cell rate an ATM connection measured over a time interval. This measurement allows the network to allocate sufficient resources that are less than those based on PCR and still ensure the achievement of the desired QOS. SCR could be unspecified, value set to 0. If specified, SCR value must be less than the PCR value. - CISCO Express Forwarding Configuration Traffic Statistics Update Rate
- cefCfgTrafficStatsUpdateRate 1.3.6.1.4.1.9.9.492.1.4.1.1.9 (defined in CISCO-CEF-MIB)
The frequency with which the line card sends the traffic load statistics to the Router Processor. Setting the value of this object to 0 will disable the CEF traffic statistics collection. - ip Traffic Profile Us Rate Limit
- ipTrafficProfileUsRateLimit 1.3.6.1.4.1.3646.1300.2.11.2.2.1.2 (defined in ASKEY-DSLAM-VC-VLAN-MIB)
The level of rate limiting in up-stream direction of this IP traffic profile. - ip Traffic Profile Max Ds Rate
- ipTrafficProfileMaxDsRate 1.3.6.1.4.1.3646.1300.2.11.2.2.1.3 (defined in ASKEY-DSLAM-VC-VLAN-MIB)
The maximum transmit data rate in Kbps in the down-stream direction of this IP traffic profile. The specified data rate will be rounded to the largest multiple of 32. - DOCSIS Ietf Qos Param Set Max Traffic Rate
- docsIetfQosParamSetMaxTrafficRate 1.3.6.1.2.1.127.1.2.1.3 (defined in DOCS-IETF-QOS-MIB)
Service Flow in bits/sec. Must count all MAC frame data PDU from the bytes following the MAC header HCS to the end of the CRC. The number of bytes forwarded is limited during any time interval. The value 0 means no maximum traffic rate is enforced. This object applies to both upstream and downstream Service Flows. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object is 0. If the parameter is not applicable, it is reported as 0. - DOCSIS Ietf Qos Service Class Max Traffic Rate
- docsIetfQosServiceClassMaxTrafficRate 1.3.6.1.2.1.127.1.8.1.4 (defined in DOCS-IETF-QOS-MIB)
Template for docsIetfQosParamSetMaxTrafficRate. - DOCSIS Qos Param Set Max Traffic Rate
- docsQosParamSetMaxTrafficRate 1.3.6.1.4.1.2011.2.25.127.7.1.2.1.6 (defined in DOCS-QOS-MIB)
service flow in bits/sec. Must count all MAC frame data PDU from the bytes following the MAC header HCS to the end of the CRC. The number of bytes forwarded is limited during any time interval. The value 0 means no maximum traffic rate is enforced. This object applies to both upstream and downstream service flows. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object is 0. If the parameter is not applicable, it is reported as 0. REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.5.2 - DOCSIS Qos Service Class Max Traffic Rate
- docsQosServiceClassMaxTrafficRate 1.3.6.1.4.1.2011.2.25.127.7.1.8.1.5 (defined in DOCS-QOS-MIB)
Template for docsQosParamSetMaxTrafficRate. - ad Gen AOS Qos Interface Traffic Shaping Rate
- adGenAOSQoSInterfaceTrafficShapingRate 1.3.6.1.4.1.664.5.53.2.1.3.1.16 (defined in ADTRAN-AOS-QOS)
Outbound traffic shaping rate in bits per second.
