8000MBM Download

tray6-media-size-loaded

Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: If the tray drawer is open, a ...

tray6-phd

Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0 (base engine), the envelope feeder is considered to be device 1 and the external input devices can number between ...

tray7-media-size-loaded

Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: If the tray drawer is open, a ...

tray7-phd

Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0 (base engine), the envelope feeder is considered to be device 1 and the external input devices can number between ...

outbin3-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin3-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin3-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: This object will return the the device number that contains this output bin. The envelope feed is considered PHD1 thus this object will return 2-6 dep ...

outbin4-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin4-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin4-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.

outbin5-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin5-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin5-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.

outbin6-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin6-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin6-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.

outbin7-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin7-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin7-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.

outbin8-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin8-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin8-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.

outbin9-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin9-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin9-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.

outbin10-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin10-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin10-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.

outbin11-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin11-maximum-binding

The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Addition ...

outbin11-phd

Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.

prtinputtype

The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for a descriptor field to further qualify the other choice. Refer to ftp://ftp.pwg.org/pub/pwg/pmp ...

prtinputdimunit

The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Following is a table ...

prtinputmediadimxfeeddirdeclared

This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The cross feed direction is ninety degrees relative to the feed direction associated with ...

prtinputmediadimfeeddirchosen

The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. Feed dimension measurements are taken relative to the feed direction asso ...

prtinputmediadimxfeeddirchosen

The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed dir ...

prtinputcapacityunit

The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: A sheet is a single p ...

prtinputmaxcapacity

The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value reflects claimed capacity. If this input sub-unit can reliably sense this value, the va ...

prtinputcurrentlevel

The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value m ...

prtinputstatus

The current status of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML STATUS-TRAY-MISSING and STATUS-TRAY-EMPTY. Values returned by the ...

prtinputname

The name assigned to this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML TRAYn-NAME.

prtinputvendorname

The vendor name of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.

prtinputmodel

The model name of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: MoBY does not specify a model name for Tray 1, 2 or 3

prtinputversion

The version of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Yukon does not specify a version number for the input trays.

prtinputserialnumber

The serial number assigned to this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Yukon does not specify a serial number for the input trays.

prtinputdescription

A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.

prtinputsecurity

Indicates if this input sub-unit has some security associated with it. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: No security mechanism provided.

prtinputmedialoadtimeout

When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in seconds) specified by this object. Upon expiration of the timeout, the printer will take the acti ...

prtinputnextindex

The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeout specified by prtInputMediaLoadTimeout expires. A value of zero(0) indicates that auto input switching will not occur when t ...

prtoutputtype

The type of technology supported by this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.

prtoutputcapacityunit

The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: A sheet is a single ...

prtoutputmaxcapacity

The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense thi ...

prtoutputremainingcapacity

The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC) of this output sub-unit. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be modifie ...

prtoutputstatus

The current status of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML NOT-READY-OUTBIN-MISSING and STATUS-OUTBIN-MISSING. The default v ...

prtoutputname

The name assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML OUTBINn-NAME. The characters must be in the range 20H to 7FH excep ...

prtoutputvendorname

The vendor name of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.

prtoutputmodel

The name assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: The value returned by the MBM depends on the current mode of the device. The po ...

prtoutputversion

The version of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Returns device-specific information about the configuration of the output bin. May in ...

prtoutputserialnumber

The serial number assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Yukon does not support a serial number for output devices.

prtoutputdescription

A free-form text description of this output sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: This ...

prtoutputsecurity

Indicates if this output sub-unit has some security associated with it and if that security is enabled or not. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: No security ...

prtoutputdimunit

The unit of measurement for use in calculating and relaying dimensional values for this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: See the descripti ...

prtoutputmaxdimfeeddir

The maximum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (MediaUnit). If this output sub-unit can reliably sense this value, ...

prtoutputmaxdimxfeeddir

The maximum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (MediaUnit). If this output sub-unit can reliably sense this v ...

prtoutputmindimfeeddir

The minimum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (DimUnit). If this output sub-unit can reliably sense this value, t ...

prtoutputmindimxfeeddir

The minimum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (DimUnit). If this output sub-unit can reliably sense this val ...

prtoutputstackingorder

The current state of the stacking order for the associated output sub-unit. `FirstToLast' means that as pages are output the front of the next page is placed against the back of the previous page. `LasttoFirst' means that as pages are output the back of t ...

prtoutputpagedeliveryorientation

The reading surface that will be `up' when pages are delivered to the associated output sub-unit. Values are faceUp and faceDown. (Note: interpretation of these values is in general context-dependent based on locale; presentation of these values to an end ...

prtoutputbursting

This object indicates that the outputting sub-unit supports bursting, and if so, whether the feature is enabled. Bursting is the process by which continuous media is separated into individual sheets, typically by bursting along pre-formed perforations. Re ...

prtoutputdecollating

This object indicates that the output supports supports decollating, and if so, whether the feature is enabled. Decollating is the process by which the individual parts within a multi-part form are separated and sorted into separate stacks for each part. ...

prtoutputpagecollated

This object indicates that the output sub-unit supports page collation, and if so, whether the feature is enabled. See glossary for definition of how this document defines collation. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more ...

prtoutputoffsetstacking

This object indicates that the output supports supports offset stacking, and if so, whether the feature is enabled. See glossary for how Offset Stacking is defined by this document. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more d ...