ACCOUNTING-CONTROL-MIB Download

acctngSelectionTable

A list of accounting information selection entries. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new file. Thus, betw ...

acctngSelectionEntry

An entry identifying an (subtree, list) tuple used to select a set of accounting information which is to be collected.

acctngSelectionIndex

An arbitrary integer value which uniquely identifies a tuple stored in this table. This value is required to be the permanent 'handle' for an entry in this table for as long as that entry exists, including across restarts and power outages.

acctngSelectionSubtree

The combination of acctngSelectionSubtree and acctngSelectionList specifies one (subtree, list) tuple which is to be collected.

acctngSelectionList

The combination of acctngSelectionSubtree and acctngSelectionList specifies one (subtree, list) tuple which is to be collected.

acctngSelectionFile

An indication of the file into which the accounting information identified by this entry is to be stored. If there is no conceptual row in the acctngFileTable for which the value of acctngFileIndex has the same value as this object, then the information ...

acctngSelectionType

Indicates the types of connections for which the information selected by this entry are to be collected.

acctngSelectionRowStatus

The status of this conceptual row. An agent may refuse to create new conceptual rows and/or modify existing conceptual rows, if such creation/modification would cause multiple rows to have the same values of acctngSelectionSubtree and acctngSelectionList ...

acctngFileTable

A list of files into which accounting information is to be stored.

acctngFileEntry

An entry identifying a file into which accounting information is to be collected.

acctngFileIndex

A unique value identifying a file into which accounting data is to be stored. This value is required to be the permanent 'handle' for an entry in this table for as long as that entry exists, including across restarts and power outages.

acctngFileName

The name of the file into which accounting data is to be stored. If files are named using suffixes, then the name of the current file is the concatenation of acctngFileName and acctngFileNameSuffix. An agent will respond with an error (e.g., 'wrongValue' ...

acctngFileNameSuffix

The suffix, if any, of the name of a file into which accounting data is currently being stored. If suffixes are not used, then the value of this object is the zero-length string. Note that if a separator, such as a period, is used in appending the suffi ...

acctngFileDescription

The textual description of the accounting data which will be stored (on the next occasion) when header information is stored in the file. The value of this object may be modified at any time.

acctngFileCommand

A control object for the collection of accounting data. When read the value is either 'idle' or 'cmdInProgress'. Writing a value is only allowed when the current value is 'idle'. When a value is successfully written, the value changes to 'cmdInProgress' ...

acctngFileMaximumSize

The maximum size of the file (including header information). When the file of collected data reaches this size, either the agent automatically swaps to a new version (i.e., a new value acctngFileNameSuffix) of the file, or new records are discarded. Sin ...

acctngFileCurrentSize

The current size of the file into which data is currently being collected, including header information.

acctngFileFormat

An indication of the format by which the accounting data is to stored in the file. If the value is modified, the new value takes effect after the next 'swap' to a new file. The value ber(2) indicates the standard format.

acctngFileCollectMode

An indication of when accounting data is to be written into this file. Note that in addition to the occasions indicated by the value of this object, an agent always writes information on appropriate connections to the file when the corresponding instance ...

acctngFileCollectFailedAttempts

An indication of whether connection data is to be collected for failed connection attempts when the value of the corresponding instance of acctngFileCollectMode includes 'onRelease'. The individual values have the following meaning: 'soft' - indicates th ...

acctngFileInterval

The number of seconds between the periodic collections of accounting data when the value of the corresponding instance of acctngFileCollectMode includes 'periodically'. Some agents may impose restrictions on the range of this interval. This value may be ...

acctngFileMinAge

The minimum age of a connection, as used to determine the set of connections for which data is to be collected at the periodic intervals and/or when acctngFileCommand is set to 'collectNow'. The age of a connection is the elapsed time since it was last i ...

acctngFileRowStatus

The status of this conceptual row. This object can not be set to 'active' until a value has been assigned to the corresponding instance of acctngFileName. Collection of data into the file does not begin until this object has the value 'active' and one or ...

acctngAdminStatus

A control object to indicate the administratively desired state of the collection of accounting records across all interfaces. Modifying the value of acctngAdminStatus to 'disabled' does not remove or change the current configuration as represented by the ...

acctngOperStatus

A status object to indicate the operational state of the collection of accounting records across all interfaces. When the value of acctngAdminStatus is modified to be 'enabled', the value of this object will change to 'enabled' providing it is possible to ...

acctngProtection

A control object to protect against duplication of control commands. Over some transport/network protocols, it is possible for SNMP messages to get duplicated. Such duplication, if it occurred at just the wrong time could cause serious disruption to the ...

acctngAgentMode

An indication of the behaviour mode of the agent when a file becomes full: 'swapOnCommand' - the agent does not automatically swap to a new file; rather, it discards newly collected data until a management application subsequently instructs it to swap to ...

acctngInterfaceTable

A table controlling the collection of accounting data on specific interfaces of the switch.

acctngInterfaceEntry

An entry which controls whether accounting data is to be collected on an interface. The types of interfaces which are represented in this table is implementation-specific.

acctngInterfaceEnable

Indicates whether the collection of accounting data is enabled on this interface.

acctngControlTrapThreshold

A percentage of the maximum file size at which a 'nearly- full' trap is generated. The value of 0 indicates that no 'nearly-full' trap is to be generated.

acctngControlTrapEnable

An indication of whether the acctngFileNearlyFull and acctngFileFull traps are enabled.

acctngBasicGroup

A collection of objects providing control of the basic collection of accounting data for connection-oriented networks.