ADTRAN-AOS-MUX-MIB Download
The MIB module for the management of AOS products with
TDM multiplexing and/or cross-connects.
IPHost Network Monitor offer an easy way of SNMP monitoring your ADTRAN Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ADTRAN-AOS-MUX-MIB
- adGenAOSXConnectTable
- The Cross-Connect Configuration Table
- adGenAOSXConnectEntry
- An entry in the Cross-Connect Configuration Table
- adGenAOSXConnectIndex
- A number that uniquely defines the cross-connect
- adGenAOSXConnectFirstIfType
- The type of interface from which a cross-connect is being made
- adGenAOSXConnectFirstIfNumber
- A number that defines the interface described by adGenAOSXConnectFirstIfType -- set to 0 if the interface can be defined by adGenAOSXConnectFirstIfSlot and adGenAOSXConnectFirstIfPort
- adGenAOSXConnectFirstSubIfNumber
- A number that further defines some interfaces -- set to 0 if the interface can be defined by adGenAOSXConnectFirstIfSlot and adGenAOSXConnectFirstIfPort
- adGenAOSXConnectFirstIfSlot
- The slot number containing the interface described by adGenAOSXConnectFirstIfType -- set to 0 if the interface can be defined by adGenAOSXConnectFirstIfNumber (and adGenAOSXConnectFirstSubIfNumber) Note: 0 is also a valid slot number.
- adGenAOSXConnectFirstIfPort
- The port number of the interface described by adGenAOSXConnectFirstIfType -- set to 0 if the interface can be defined by adGenAOSXConnectFirstIfNumber (and adGenAOSXConnectFirstSubIfNumber)
- adGenAOSXConnectFirstTdmGroup
- A number uniquely identifying the TDM Group associated with the interface described by adGenAOSXConnectFirstIfType -- set to 0 if it is not necessary that a TDM Group be associated with the interface
- adGenAOSXConnectFirstTdmGroupDS0
- The specific DS0 of the TDM Group, described by adGenAOSXConnectFirstTdmGroup, from which a cross- connect is being made -- set to 0 if it is not necessary that a specific timeslot be defined
- adGenAOSXConnectSecondIfType
- The type of interface to which a cross-connect is being made
- adGenAOSXConnectSecondIfNumber
- A number that defines the interface described by adGenAOSXConnectSecondIfType -- set to 0 if the interface can be defined by adGenAOSXConnectSecondIfSlot and adGenAOSXConnectSecondIfPort
- adGenAOSXConnectSecondSubIfNumber
- A number that further defines some interfaces -- set to 0 if the interface can be defined by adGenAOSXConnectSecondIfSlot and adGenAOSXConnectSecondIfPort
- adGenAOSXConnectSecondIfSlot
- The slot number containing the interface described by adGenAOSXConnectSecondIfType -- set to 0 if the interface can be defined by adGenAOSXConnectSecondIfNumber (and adGenAOSXConnectSecondSubIfNumber) Note: 0 is also a valid slot number.
- adGenAOSXConnectSecondIfPort
- The port number of the interface described by adGenAOSXConnectSecondIfType -- set to 0 if the interface can be defined by adGenAOSXConnectSecondIfNumber (and adGenAOSXConnectSecondSubIfNumber)
- adGenAOSXConnectSecondTdmGroup
- A number uniquely identifying the TDM Group associated with the interface described by adGenAOSXConnectSecondIfType -- set to 0 if it is not necessary that a TDM Group be associated with the interface
- adGenAOSXConnectSecondTdmGroupDS0
- The specific DS0 of the TDM Group, described by adGenAOSXConnectSecondTdmGroup, to which a cross- connect is being made -- set to 0 if it is not necessary that a specific timeslot be defined
- adGenAOSXConnectPreserveRbs
- The ability of the cross-connect to maintain robbed-bit signaling integrity -- set to disabled if robbed-bit signaling is not a characteristic of the cross-connect.
- adGenAOSXConnectRowStatus
- The status of this conceptual row. Until instances of appropriate corresponding columns are configured, the value of the corresponding instance of the adGenAOSXConnectStatus column is 'notReady'.
- adGenAOSTdmGroupTable
- The TDM Group Table that associates DS0s into mappable units
- adGenAOSTdmGroupEntry
- An entry in the TDM Group Table
- adGenAOSTdmGroupIfSlot
- The slot number containing the interface for the TDM Group
- adGenAOSTdmGroupIfPort
- The port number containing the interface for the TDM Group
- adGenAOSTdmGroupID
- A number that uniquely defines the TDM Group
- adGenAOSTdmGroupMask
- A bitmap of the contiguous DS0s included in this TDM Group Example: mapping DS0s 1-12: 00000000000000000000111111111111 (bin), 00000FFF (hex), 4095 (dec) Note: To create a new row in adGenAOSTdmGroupTable, set adGenAOSTdmGroupMask with the appropriate ind ...
- adGenAOSTdmGroupUsage
- The speed of the individual DS0s
- adGenAOSXConnectGrp
- The Cross-Connect Group.
- adGenAOSTdmGroupGrp
- The TDM Group Group.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
