ADTRAN-ATLAS-V35NX-MIB Download

adATLASV35NxIfNumber

The number of V.35 Nx ports (regardless of their current state) present on this system.

adATLASV35NxIfTable

The ATLAS V.35 Nx Interface Status Table.

adATLASV35NxIfEntry

An entry in the ATLAS V.35 Nx Interface Status Table.

adATLASV35NxIfIndex

This variable indicates the interface number of a particular V.35 Nx port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table.

adATLASV35NxIfSlotNum

This variable indicates the slot number of a particular ATLAS module with a V.35 Nx interface.

adATLASV35NxIfPortNum

This variable indicates the port number of a particular V.35 Nx interface on an ATLAS module.

adATLASV35NxIfAlarmStatus

This bit-encoded variable indicates the current alarm status of a V.35 Nx interface. This variable is encoded as follows: CLOCK SLIP ALARM 0x01 PLL ALARM 0x02 ZERO ALARM 0x04 NO EXT CLK ALARM 0x08 Note: There may be multiple bits ...

adATLASV35NxIfDTEStatus

This bit-encoded variable indicates the current state of the DTE leads on a V.35 Nx interface. This variable is encoded as follows: RTS 0x001 CTS 0x002 DTR 0x004 DSR 0x008 DCD 0x010 RI 0x020 TD 0x040 RD 0x080 EC 0x ...

adATLASV35NxIfDataRate

This variable indicates the current data rate of a V.35 Nx interface.

adATLASV35NxIfPLLFifoStatus

This bit-encoded variable indicates the current PLL/FIFO status of a V.35 Nx interface. This variable is encoded as follows: LOCK 0x01 RXE 0x02 RXF 0x04 TXE 0x08 TXF 0x10 Note: There may be multiple bits set based on the current s ...

adATLASV35NxIfInbandStatTable

The ATLAS V.35 Nx Interface Inband Statistics Table.

adATLASV35NxIfInbandStatEntry

An entry in the ATLAS V.35 Nx Interface Inband Statistics Table.

adATLASV35NxIfInbandStatIndex

This variable indicates the Interface number of a particular V.35 Nx port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table.

adATLASV35NxIfInbandStatRxFrames

This variable indicates the number of frames recieved by a particular V.35 Nx interface.

adATLASV35NxIfInbandStatTxFrames

This variable indicates the number of frames transmitted by a particular V.35 Nx interface.

adATLASV35NxIfInbandStatRxBytes

This variable indicates the number of bytes recieved by a particular V.35 Nx interface.

adATLASV35NxIfInbandStatTxBytes

This variable indicates the number of bytes transmitted by a particular V.35 Nx interface.

adATLASV35NxIfInbandStatReset

This variable is used to reset the inband statistics.

adATLASV35NxTstTable

The ATLAS V.35 Nx Interface Test Table.

adATLASV35NxTstEntry

An entry in the ATLAS V.35 Nx Interface Test Table.

adATLASV35NxTstIndex

This variable indicates the interface number of a particular V.35 Nx port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table.

adATLASV35NxTstLoopbk

This variable controls the activation and deactivation of loopbacks on a particular V.35 Nx interface.

adATLASV35NxTstLoopbkStatus

This variable indicates a V.35 Nx interface’s current loopback status by displaying one of the following status messages: • No loopback active • Looping up remote unit • Remote unit looped back • Looping down remote unit • Remote loopup failed • Port loop ...

adATLASV35NxTst511Pattern

This variable controls the activation and deactivation of the 511 test pattern generator and detector.

adATLASV35NxTstPatternSync

This variable displays the synchronization status of the 511 pattern test.

adATLASV35NxTstPatternSyncLost

This variable displays whether or not the synchronization was ever lost during the 511 pattern test.

adATLASV35NxTstPatternESs

This variable indicates the number of seconds (after pattern sync) of the 511 pettern test that have contained at least one error.

adATLASV35NxTstInjectErrs

Inject a 511 pattern error into the data stream.

adATLASV35NxTstClearRslts

Reset all test results.