ALCATEL-IND1-BGP-MIB Download

alcatelIND1BGPMIBObjects

Branch For Border Gateway Protocol (BGP) Subsystem Managed Objects.

alcatelIND1BGPMIBConformance

Branch For Border Gateway Protocol (BGP) Subsystem Conformance Information.

alcatelIND1BGPMIBGroups

Branch For Border Gateway Protocol (BGP) Subsystem Units Of Conformance.

alcatelIND1BGPMIBCompliances

Branch For Border Gateway Protocol (BGP) Subsystem Compliance Statements.

alaBgpProtoStatus

Enable/Disable BGP protocol

alaBgpAutonomousSystemNumber

Autonomous System Number.

alaBgpRouterId

Configured BGP router ID.

alaBgpIgpSynchStatus

Enable/Disable BGP IGP Synchronization.

alaBgpMedAlways

Enable/Disable BGP Metric MULTI_EXIT_DISC comparison between routes from different Autonomous Systems.

alaBgpDefaultLocalPref

The default LOCAL_PREF to be applied to routes learnt from neighbouring autonomous system.

alaBgpMissingMed

Specifies how to a missing med in a path attribute.

alaBgpManualTag

Manual tag to be used. A value of 0 means no manual tagging.

alaBgpPromiscuousNeighbours

Enable/Disable BGP to accept connections from neighbours that are not configured.

alaBgpConfedId

Confederation identifier. A value of 0 means this local speaker is not a member of any confederation

alaBgpDampening

Enable/Disable BGP route dampening

alaBgpDampHalfLifeReach

The time in seconds in which the penalty to a flapping route decreases to half its initial value while the route remains reachable. Obsoleted by the variable alaBgpDampHalfLife.

alaBgpDampHalfLifeUnReach

The time in seconds in which the penalty to a flapping route decreases to half its initial value while the route remains unreachable. Obsoleted by the variable alaBgpDampHalfLife.

alaBgpDampMaxFlapHistory

The time in seconds the flap history of a route is retained.

alaBgpDebugLevel

Sets the level of Debugging for the BGP Protocol on this router. A level of 0 indicates no debugging.

alaBgpFastExternalFailOver

Enable/Disable Resetting session immediately if a link to a directly connected external peer is operationally down.

alaBgpPeerChanges

Enable/Disable logging of peer state changes to the syslog.

alaBgpVersion

The BGP Version in use.

alaBgpProtoOperState

The BGP protocol operational state.

alaBgpMaxPeers

Maximum BGP peers supported.

alaBgpNumActiveRoutes

The number of active known routes in the BGP routing table

alaBgpNumEstabExternalPeers

The number of External Peers that are in ESTABLISHED state.

alaBgpNumEstabInternalPeers

The number of Internal Peers that are in ESTABLISHED state.

alaBgpNumPaths

The total number of paths known to the system.

alaBgpNumFeasiblePaths

The total number of feasible paths known to the system.

alaBgpNumDampenedPaths

The total number of dampened paths known to the system.

alaBgpNumIgpSyncWaitPaths

The total number of paths learnt from internal peers that are waiting to be synchronized with IGP.

alaBgpNumPolicyChgPaths

The total number of paths that are currently rejected but stored anticipating an inbound policy change for an external peer which is configured to accept dynamic policy changes.

alaBgpMultiPath

Enable/Disable Equal-Cost MultiPaths

alaBgpRouteReflection

Enable/Disable Route reflection

alaBgpClusterId

The local cluster id of this route reflection cluster.

alaBgpDampeningClear

Writing a value of clear into this variable will clear the dampening history.

alaBgpDampCutOff

When a route's figure of merit reaches this value, the route is considered damped. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 ,a value of 9.45 is encoded as 945.

alaBgpDampReuse

When a route's figure of merit decays to this value, the route can be reused. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 , a value of 9.45 is encoded as 945.

alaBgpDampCeil

The maximum value that the figure of merit of a route can attain. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945.

alaBgpAspathCompare

Specifies whether to include aspath comparison in route selection.

alaBgpAsOriginInterval

The minimum interval in seconds between successive updates advertising the networks belonging to the local autonomous system.

alaBgpDampHalfLife

The time in seconds in which the penalty to a flapping route decreases to half its initial value.

alaBgpPeerTable

BGP peer table.

alaBgpPeerEntry

BGP Peer configuration entry.

alaBgpPeerAddr

Ip Address of the peer.

alaBgpPeerAS

Autonomous system of the peer.

alaBgpPeerPassive

Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection.

alaBgpPeerName

A symbolic name for the neighbour.

alaBgpPeerMultiHop

If enabled the external peer is allowed to be multiple hops away.

alaBgpPeerMaxPrefix

The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode.

alaBgpPeerMaxPrefixWarnOnly

If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP debug for type 'warnings' must be activated and debug level set to 20.

alaBgpPeerNextHopSelf

If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the ip address of the interface attached to this peer.

alaBgpPeerSoftReconfig

Enable/Disable dynamic policy configurability on the connection to this peer.

alaBgpPeerInSoftReset

Route refresh capability is Enabled/Disabled on the connection to this peer.

alaBgpPeerIpv4Unicast

Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer .

alaBgpPeerIpv4Multicast

Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer .

alaBgpPeerRcvdRtRefreshMsgs

The number of route refresh messages received from this peer.

alaBgpPeerSentRtRefreshMsgs

The number of route refresh messages sent to this peer.

alaBgpPeerRouteMapOut

The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName.

alaBgpPeerRouteMapIn

The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName.

alaBgpPeerLocalAddr

Local Ip Address of this connection.

alaBgpPeerLastDownReason

The general reason for termination of last established session with the peer since the protocol was operationally up.

alaBgpPeerLastDownTime

The time elapsed since the BGP session with the peer was terminated.

alaBgpPeerLastReadTime

The time elapsed since we last read data from the peer.

alaBgpPeerRcvdNotifyMsgs

The Number of notification messages received from this peer.

alaBgpPeerSentNotifyMsgs

The Number of notification messages sent to this peer.

alaBgpPeerLastSentNotifyReason

The last notification reason sent.

alaBgpPeerLastRecvNotifyReason

The last notification reason received.

alaBgpPeerRcvdPrefixes

The Number of prefixes received from this peer.

alaBgpPeerDownTransitions

The Number of times this peer session transitioned to IDLE state.

alaBgpPeerType

This indicates whether the peer belongs to the local autonomous system(internal) or another autonmous system.

alaBgpPeerClearCounter

Setting a value of clear into this variable will clear the per peer statistics.

alaBgpPeerAutoReStart

Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state.

alaBgpPeerClientStatus

If enabled this peer is a route reflection client.

alaBgpPeerConfedStatus

If enabled this peer is a member of our confederation.

alaBgpPeerRemovePrivateAs

If enabled private as numbers are stripped out in the updates sent to this peer.

alaBgpPeerTTL

TTL count for packets on this TCP connection.

alaBgpPeerAspathListOut

The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId.

alaBgpPeerAspathListIn

The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId.

alaBgpPeerPrefixListOut

The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId.

alaBgpPeerPrefixListIn

The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId.

alaBgpPeerCommunityListOut

The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId.

alaBgpPeerCommunityListIn

The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId.

alaBgpPeerRestart

Setting a value of restart into this variable will restart the peer.

alaBgpPeerDefaultOriginate

If enabled a default route is sent to this neighbour.

alaBgpPeerReconfigureInBound

Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer.

alaBgpPeerReconfigureOutBound

Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer.

alaBgpPeerMD5Key

Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant.

alaBgpPeerMD5KeyEncrypt

Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot.

alaBgpPeerRowStatus

Row status variable.

alaBgpPeerUpTransitions

The Number of times this peer session transitioned to ESTABLISHED state.

alaBgpAggrTable

BGP Aggregate configuration table.

alaBgpAggrEntry

BGP Aggregation entry.

alaBgpAggrAddr

Aggregate address.

alaBgpAggrMask

Aggregate Mask.

alaBgpAggrSummarize

If enabled only aggregate is advertised. Otherwise more specific routes are also advertised.

alaBgpAggrSet

If enabled aggregate all aspaths.

alaBgpAggrState

if active the aggregate is actively being advertised.

alaBgpAggrMetric

This specifies the MED to be used when advertising this aggregate to external peers. A value of 0 indicates not to send MED.

alaBgpAggrLocalPref

This specifies the override default LOCAL PREF to be used when advertising this aggregate to internal peers. A value of 0 indicates not to override the default.

alaBgpAggrCommunity

The value to set the COMMUNITY attribute when advertising this aggregate.

alaBgpAggrRowStatus

Row status variable.

alaBgpNetworkTable

BGP Network configuration table.

alaBgpNetworkEntry

BGP Network entry.

alaBgpNetworkAddr

Aggregate address.

alaBgpNetworkMask

Aggregate Mask.

alaBgpNetworkState

Indicates whether the network is being actively advertised or not.

alaBgpNetworkMetric

This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED.

alaBgpNetworkLocalPref

This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default.

alaBgpNetworkCommunity

The value to set the COMMUNITY attribute when advertising this network.

alaBgpNetworkRowStatus

Row status variable.

alaBgpRouteTable

BGP Routing table.

alaBgpRouteEntry

BGP Network entry.

alaBgpRouteAddr

Destination address.

alaBgpRouteMask

Destination Mask.

alaBgpRouteState

Indicates whether the route is being actively advertised or not.

alaBgpRoutePaths

Number of total paths available to this destination.

alaBgpRouteFeasiblePaths

Number of Feasible paths available to this destination.

alaBgpRouteNextHop

The BGP Nexthop to reach this destination.

alaBgpRouteIgpNextHop

The IGP Nexthop to reach this destination.

alaBgpRouteIsHidden

Indicates whether the route is hidden (by an aggregate).

alaBgpRouteIsAggregate

Indicates whether the route is an aggregate.

alaBgpRouteIsAggregateContributor

Indicates whether the route is an aggregate contributor.

alaBgpRouteAdvNeighbors

List of (addresses of )neighbours to whom this route has been advertised is encoded here.

alaBgpPathTable

BGP Path table.

alaBgpPathEntry

BGP path entry.

alaBgpPathAddr

Destination address.

alaBgpPathMask

Destination Mask.

alaBgpPathPeerAddr

The Ip address of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0.

alaBgpPathSrcProto

The protocol from which the path was learnt.

alaBgpPathWeight

The weight assigned to this path.

alaBgpPathPref

The degree of preference assigned to this path.

alaBgpPathState

Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system.

alaBgpPathOrigin

The ORIGIN attribute of the path.

alaBgpPathNextHop

The NEXTHOP attribute of the path.

alaBgpPathAs

The sequence of AS path segments. Each AS path segment is represented by a triple . The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_ ...

alaBgpPathLocalPref

The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute.

alaBgpPathMed

The Multi Exit Disc. attribute of the path. A value of -1 indicates the absence of this attribute.

alaBgpPathAtomic

Indicates whether this path is generated without selecting a less specific route.

alaBgpPathAggregatorAs

The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute.

alaBgpPathAggregatorAddr

The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.

alaBgpPathCommunity

The community attribute of the path. The communities are represented as series of 4 octet values.

alaBgpPathUnknownAttr

One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.

alaBgpDampTable

BGP Dampened paths table.

alaBgpDampEntry

BGP Network entry.

alaBgpDampAddr

Destination address.

alaBgpDampMask

Destination mask.

alaBgpDampPeerAddr

Neighbour address.

alaBgpDampFigureOfMerit

The figure of merit value. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945.

alaBgpDampFlaps

The number of times this route has flapped.

alaBgpDampDuration

Time in seconds since the flap was noticed.

alaBgpDampLastUpdateTime

Time in seconds since this damp entry (figure of merit) was last updated.

alaBgpDampReuseTime

Time in seconds until this route will be reused.

alaBgpDampClear

A value of clear will clear this damp history information.

alaBgpRouteMapTable

BGP Policy RouteMap table.

alaBgpRouteMapEntry

BGP Route Map Entry.

alaBgpRouteMapName

Name of the route map.

alaBgpRouteMapInst

Instance of this route map.

alaBgpRouteMapAsPathMatchListId

This is same as alaBgpAspathMatchListId. It identifies the matching criteria list of Autonomous system paths. Empty quotes indicate no autonomous system paths matching criteria is to be applied.

alaBgpRouteMapPrefixMatchListId

This is same as alaBgpPrefixMatchListId. It identifies the matching criteria list of prefixes. Empty quotes indicate no prefix matching criteria is to be applied.

alaBgpRouteMapCommunityMatchListId

This is same as alaBgpCommunityMatchListId. It identifies the matching criteria list of communities. Empty quotes indicate no community matching criteria is to be applied.

alaBgpRouteMapOrigin

The value to set the origin of the routes matched by this RouteMap instance. A value of none means no origin is to be set.

alaBgpRouteMapLocalPref

The value to set the LOCAL PREF attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the LOCAL PREF attribute in conjunction with the associated value of alaBgpRouteMapLocalPrefMode.

alaBgpRouteMapLocalPrefMode

This variable specifies how alaBgpRouteMapLocalPref is to be operated on an existing LPREF attribute of a route on which this RouteMap instance is applied to.

alaBgpRouteMapMed

The value to set the MULTI EXIT DISC attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the MULTI EXIT DISC attribute in conjunction with the associated value of alaBgpRouteMapMedMode.

alaBgpRouteMapMedMode

This variable specifies how alaBgpRouteMapMed is to be operated on an existing MULTI EXIT DISC attribute of a route on which this RouteMap instance is applied to.

alaBgpRouteMapAsPrepend

The value to prepend to the AS_PATH attribute of the routes matched by this RouteMap instance. Empty quotes indicates no AS_PATH prepending is to be done.

alaBgpRouteMapSetCommunityMode

Determines whether alaBgpRouteMapCommunity will be adding to or replacing the COMMUNITY attribute of the routes matched by this RouteMap instance.

alaBgpRouteMapCommunity

The value to set the COMMUNITY attribute of the routes matched by this RouteMap instance.

alaBgpRouteMapMatchAsRegExp

AsPath regular expression matching primitive.

alaBgpRouteMapMatchPrefix

Prefix match primitive.

alaBgpRouteMapMatchMask

Prefix match mask primitive

alaBgpRouteMapMatchCommunity

Community match primitive

alaBgpRouteMapWeight

This sets the weight for the incoming route. This parameter has no effect on outbound policy.

alaBgpRouteMapAction

This determines whether to allow a matching route to pass through.

alaBgpRouteMapRowStatus

Row status variable

alaBgpAspathMatchListTable

BGP Policy Aspath criteria matching table.

alaBgpAspathMatchListEntry

Aspath matching entry .

alaBgpAspathMatchListId

Identifier of this list of autonomous system path matching criteria.

alaBgpAspathMatchListRegExp

The regular expression identifying the autnomous system paths to be matched by this instance.

alaBgpAspathMatchListPriority

This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathMatchListId.

alaBgpAspathMatchListAction

This determines whether to accept or reject a matching route.

alaBgpAspathMatchListRowStatus

Row status variable

alaBgpPrefixMatchListTable

BGP Policy prefix matching criteria table.

alaBgpPrefixMatchListEntry

BGP Prefix matching instance.

alaBgpPrefixMatchListId

Identifier of this list of autonomous system path matching criteria.

alaBgpPrefixMatchListAddr

The address to be matched.

alaBgpPrefixMatchListMask

The mask to be matched.

alaBgpPrefixMatchListGE

Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListGE must be > length of (alaBgpPrefixMatchListMask) and < alaBgpPrefixMatchListLE.

alaBgpPrefixMatchListLE

Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListLE must be >= alaBgpPrefixMatchListGE and <= 32.

alaBgpPrefixMatchListAction

This determines whether to accept or reject a matching route.

alaBgpPrefixMatchListRowStatus

Row status variable

alaBgpCommunityMatchListTable

BGP Policy Community criteria matching table.

alaBgpCommunityMatchListEntry

Community matching entry .

alaBgpCommunityMatchListId

Identifier of this list of communities matching criteria.

alaBgpCommunityMatchListString

The string identifying the communities to be matched by this instance.

alaBgpCommunityMatchListPriority

This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityMatchListId.

alaBgpCommunityMatchListType

This determines the matching type.

alaBgpCommunityMatchListAction

This determines whether to accept or reject a matching route.

alaBgpCommunityMatchListRowStatus

Row status variable.

alaBgpAspathPriMatchListTable

Priority sorted view of BGP Policy Aspath matching table.

alaBgpAspathPriMatchListEntry

Aspath matching entry .

alaBgpAspathPriMatchListId

Identifier of this list of autonomous system path matching criteria.

alaBgpAspathPriMatchListPriority

This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathPriMatchListId.

alaBgpAspathPriMatchListIntIdx

This is the order in which the matching regular expressions are created in the list identified by alaBgpAspathPriMatchListId.

alaBgpAspathPriMatchListRegExp

The regular expression identifying the autnomous system paths to be matched by this instance

alaBgpAspathPriMatchListAction

This determines whether to accept or reject a matching route.

alaBgpAspathPriMatchListRowStatus

Row status variable.

alaBgpCommunityPriMatchListTable

Priority sorted view of BGP Policy Community matching table.

alaBgpCommunityPriMatchListEntry

Community matching entry .

alaBgpCommunityPriMatchListId

Identifier of this list of communities matching criteria.

alaBgpCommunityPriMatchListPriority

This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityPriMatchListId.

alaBgpCommunityPriMatchListIntIdx

This determines the order in which the matching regular expressions are created in the list identified by alaBgpCommunityPriMatchListId.

alaBgpCommunityPriMatchListString

The string identifying the communities to be matched by this instance.

alaBgpCommunityPriMatchListType

This determines the matching type.

alaBgpCommunityPriMatchListAction

This determines whether to accept or reject a matching route.

alaBgpCommunityPriMatchListRowStatus

Row status variable

alaBgpRedistRouteTable

A configuration table which controls the routes to be redistributed by BGP from other routing protocols.

alaBgpRedistRouteEntry

A configuration table which controls the routes to be redistributed by BGP from other routing protocols.

alaBgpRedistRouteProto

Protocol from where this route is to be imported from.

alaBgpRedistRouteDest

The destination IP address of this route.

alaBgpRedistRouteMask

The network mask for this route.

alaBgpRedistRouteMetric

The med to be sent to external peers. If 0, no med is sent.

alaBgpRedistRouteLocalPref

The value to override the default local pref sent to internal peers. If 0, no override is applied.

alaBgpRedistRouteCommunity

The value to set the COMMUNITY attribute when advertising this network.

alaBgpRedistRouteSubnetMatch

Redistribute all the subnet routes if it is enabled. Otherwise, redistribute only matching network route.

alaBgpRedistRouteEffect

Controls the redistribution of routes in this range.

alaBgpRedistRouteRowStatus

Row status variable

alaBgpDebugTable

BGP debugging table.

alaBgpDebugEntry

BGP debugging entry.

alaBgpDebugEvent

debug event

alaBgpDebugStatus

Administratively enables/disables debugging this event type. Only significant if alaBgpDebugLevel is greater than 0.

alaBgpDebugDescription

Description of the event.

alabgpMIBGlobalsGroup

A collection of objects providing information on global BGP state.

alabgpMIBPeerGroup

A collection of objects for managing BGP peers.

alabgpMIBAggrGroup

A collection of objects for managing BGP aggregates.

alabgpMIBNetworkGroup

A collection of objects for managing BGP networks.

alabgpMIBRouteGroup

A collection of objects for managing BGP routes.

alabgpMIBPathAttrGroup

A collection of objects for managing BGP paths attributes.

alabgpMIBDampGroup

A collection of objects for managing BGP dampening.

alabgpMIBRouteMapGroup

A collection of objects for managing BGP route maps.

alabgpMIBAspathListGroup

A collection of objects for managing BGP aspath lists.

alabgpMIBPrefixListGroup

A collection of objects for managing BGP prefix lists.

alabgpMIBCommunityListGroup

A collection of objects for managing BGP community lists.

alabgpMIBAspathPriListGroup

A collection of objects for managing BGP aspath lists by priority.

alabgpMIBCommunityPriListGroup

A collection of objects for managing BGP community lists by priority.

alabgpMIBRedistRouteGroup

A collection of objects for managing BGP redistribution routes.

alabgpMIBDebugGroup

A collection of objects for managing BGP debug infos.