ALCATEL-IND1-CONFIG-MGR-MIB Download
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
IPHost Network Monitor offer an easy way of SNMP monitoring your Alcatel Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ALCATEL-IND1-CONFIG-MGR-MIB
- alcatelIND1ConfigMgrMIBObjects
- Branch For Configuration Manager Subsystem Managed Objects.
- alcatelIND1ConfigMgrMIBConformance
- Branch For Configuration Manager Subsystem Conformance Information.
- alcatelIND1ConfigMgrMIBGroups
- Branch For Configuration Manager Subsystem Units Of Conformance.
- alcatelIND1ConfigMgrMIBCompliances
- Branch For Configuration Manager Subsystem Compliance Statements.
- configFileName
- The name of the configuration file to be read by the device. The file specified should be present on the device.
- configFileAction
- Triggers application of the configuration file specified by the configInputFileName. A value of checkSyntax causes configInputFile to be checked for syntax, with no changes to device configuration. A value of checkSyntaxAndApply causes the configInputFile ...
- configErrorFileName
- The name of the file containing the error messages generated by the device during file configuration.
- configFileStatus
- Status of most recent application of configuration file to the device.
- configFileMode
- The verbose mode displays all configuration commands and errors when the file is applied on the console screen.
- configTimerFileName
- The name of the configuration file to be read later by the device.
- configTimerFileTime
- The local time when the configuration file will be read by the device. This object is only set if the configInputFile must be applied at a later time. The following formats are valid: MM/DD/YYYY hh:mm MM/DD/YY hh:mm MM/DD hh:mm - uses current year if aft ...
- configTimerFileStatus
- The current status of the ASCII configuration timer.
- configTimerClear
- A set of this object causes the ASCII configuration timer to be cleared.
- configSnapshotFileName
- The name of the configuration snap-shot file to be generated by the device.
- configSnapshotAction
- A set of this object causes the configuration snap-shot to be generated by the device.
- configSnapshotAllSelect
- A set of this object causes all application configuration data to be included in the snap-shot file generated by the device.
- configSnapshotVlanSelect
- A set of this object causes Vlan configuration data to be included in the snap-shot file generated by the device.
- configSnapshotSpanningTreeSelect
- A set of this object causes Spanning Tree configuration data to be included in the snap-shot file generated by the device.
- configSnapshotQOSSelect
- A set of this object causes QOS configuration data to be included in the snap-shot file generated by the the device.
- configSnapshotIPSelect
- A set of this object causes IP configuration data to be included in the snap-shot file generated by the the device.
- configSnapshotIPXSelect
- A set of this object causes IPX configuration data to be included in the snap-shot file generated by the the device.
- configSnapshotIPMSSelect
- A set of this object causes IPX configuration data to be included in the snap-shot file generated by the the device.
- configSnapshotAAASelect
- A set of this object causes AAA configuration data to be included in the snap-shot file generated by the the device.
- configSnapshotSNMPSelect
- A set of this object causes SNMP configuration data to be included in the snap-shot file generated by the the device.
- configSnapshot8021QSelect
- A set of this object causes 802.1Q configuration data to be included in the snap-shot file generated by the the device.
- configSnapshotLinkAggregateSelect
- A set of this object causes link aggregation configuration data to be included in the snap-shot file generated by the device.
- configSnapshotPortMirrorSelect
- A set of this object causes port mirroring configuration data to be included in the snap-shot file generated by the device.
- configSnapshotXIPSelect
- A set of this object causes proprietary inter-switch protocol configuration data to be included in the snap-shot file generated by the device.
- configSnapshotHealthMonitorSelect
- A set of this object causes health monitoring configuration data to be included in the snap-shot file generated by the device.
- configSnapshotBootPSelect
- A set of this object causes bootp configuration data to be included in the snap-shot file generated by the device.
- configSnapshotBridgeSelect
- A set of this object causes source-learning configuration data to be included in the snap-shot file generated by the device.
- configSnapshotChassisSelect
- A set of this object causes the chassis configuration data to be included in the snap-shot file generated by the device.
- configSnapshotInterfaceSelect
- A set of this object causes ethernet interface configuration data to be included in the snap-shot file generated by the device.
- configSnapshotPolicySelect
- A set of this object causes policy manager configuration data to be included in the snap-shot file generated by the device.
- configSnapshotSessionSelect
- A set of this object causes the user-session configuration data to be included in the snap-shot file generated by the device.
- configSnapshotServerLoadBalanceSelect
- A set of this object causes server load balancing configuration data to be included in the snap-shot file generated by the device.
- configSnapshotSystemServiceSelect
- A set of this object causes system services configuration data to be included in the snap-shot file generated by the device.
- configSnapshotVRRPSelect
- A set of this object causes VRRP configuration data to be included in the snap-shot file generated by the device.
- configSnapshotWebSelect
- A set of this object causes web manager configuration data to be included in the snap-shot file generated by the device.
- configSnapshotRIPSelect
- A set of this object causes RIP configuration data to be included in the snap-shot file generated by the device.
- configSnapshotOSPFSelect
- A set of this object causes OSPF configuration data to be included in the snap-shot file generated by the device.
- configSnapshotBGPSelect
- A set of this object causes BGP configuration data to be included in the snap-shot file generated by the device.
- configSnapshotIPRMSelect
- A set of this object causes IPRM routing configuration data to be included in the snap-shot file generated by the device.
- configSnapshotIPMRSelect
- A set of this object causes IP multicast routing configuration data to be included in the snap-shot file generated by the device.
- configSnapshotModuleSelect
- A set of this object causes module configuration data to be included in the snap-shot file generated by the device.
- configTechSupportLogAction
- A set of this object causes a tech_support.log file to be created containing switch information useful to a technical support group.
- configWriteMemory
- A set of this object causes the entire switch snap-shot configuration to be stored in the boot.cfg file in the working directory.
- configErrorFileMaximum
- The maximum number of error files which may be present on a switch. Each time a new error file is created, all but the newest configErrorFileMaxNum error files are deleted.
- configChangeStatus
- The current state of the running configuration with respect to the saved configuration.
- configFileGroup
- Collection of objects for file configuration.
- configTimerFileGroup
- Collection of objects for timer file configuration.
- configSnapshotGroup
- Collection of objects for snapshot configuration.
- configTechSupportLogGroup
- Collection of objects for technical support log file.
- configWriteMemoryGroup
- Collection of objects for write memory.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
