ALCATEL-IND1-DVMRP-MIB Download
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This MIB contains management information for Coronado Layer
3 Hardware Routing Engine (HRE) management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
IPHost Network Monitor offer an easy way of SNMP monitoring your Alcatel Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ALCATEL-IND1-DVMRP-MIB
- alaDvmrpAdminStatus
- Administratively enables/disables the DVMRP protocol on this router.
- alaDvmrpRouteReportInterval
- The Route Report Interval determines how often a router will send its complete routing tables to neighboring routers running DVMRP.
- alaDvmrpFlashUpdateInterval
- The minimum Flash Update Interval defines how often routing table change messages are sent to neighboring DVMRP routers. Since these messages are sent between the transmission of complete routing tables, the flash update interval value must be shorter th ...
- alaDvmrpNeighborTimeout
- The Neighbor Timeout value specifies how long, without any activity from a neighboring DVMRP router, the router will wait before assuming that the inactive router is down.
- alaDvmrpRouteExpirationTimeout
- The Route Expiration Timeout value specifies how long the router will wait before aging out a route. When this value expires, the route is advertised as inactive until either it's activity resumes or it is deleted.
- alaDvmrpRouteHoldDown
- Specifies the time during which DVMRP routes are kept in a hold-down state. A hold-down state refers to the time that a route to an inactive network continues to be advertised.
- alaDvmrpNeighborProbeInterval
- The Neighbor Probe Interval value specifies how often probes will be transmitted to those interfaces with attached DVMRP neighbors.
- alaDvmrpPruneLifetime
- The Prune Lifetime value defines the value whereby a source-rooted multicast tree will be pruned.
- alaDvmrpPruneRetransmission
- The Prune Packet Retransmission value is the duration of time that the router will wait, if it continues to receive unwanted multicast traffic, before retransmitting a prune message.
- alaDvmrpGraftRetransmission
- The Graft message Retransmission value defines the duration of time that the router will wait before retransmitting a graft message, if it has not already received an acknowledgement from its neighbor.
- alaDvmrpDebugLevel
- Sets the level of Debugging for the DVMRP Protocol on this router. A level of 0 indicates no debugging.
- alaDvmrpDebugError
- Administratively enables/disables debugging for DVMRP Error messages if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugNbr
- Administratively enables/disables debugging for DVMRP Neighbor processing if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugRoutes
- Administratively enables/disables debugging for DVMRP Route processing if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugProbes
- Administratively enables/disables debugging for DVMRP Probe processing if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugPrunes
- Administratively enables/disables debugging for DVMRP Prune processing if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugGrafts
- Administratively enables/disables debugging for DVMRP Graft processing if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugTime
- Administratively enables/disables debugging for DVMRP Timer processing if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugIgmp
- Administratively enables/disables debugging for DVMRP Igmp processing if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugFlash
- Administratively enables/disables debugging for DVMRP Flash processing if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugMip
- Administratively enables/disables debugging for DVMRP MIP processing (including CLI/SNMP) if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugInit
- Administratively enables/disables debugging for DVMRP Initialization if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugTm
- Administratively enables/disables debugging for DVMRP Task Manager Interaction if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugIpmrm
- Administratively enables/disables debugging for DVMRP IPMRM Interaction if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugMisc
- Administratively enables/disables miscellaneous debugging of DVMRP if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpDebugAll
- Administratively enables/disables all debugging of DVMRP if the alaDvmrpDebugLevel is greater than 0.
- alaDvmrpConfigMIBGroup
- A collection of objects to support the management of global configuration parameters on DVMRP routers.
- alaDvmrpDebugMIBGroup
- A collection of optional objects to provide debugging support on DVMRP routers.
