ALCATEL-IND1-UDP-RELAY-MIB Download
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
UDP Relay to forward BOOTP/DHCP requests across VLANs
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
IPHost Network Monitor offer an easy way of SNMP monitoring your Alcatel Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ALCATEL-IND1-UDP-RELAY-MIB
- alcatelIND1UDPRelayMIBObjects
- Branch For UDP Relay Subsystem Managed Objects.
- alcatelIND1UDPRelayMIBConformance
- Branch For UDP Relay Subsystem Conformance Information.
- alcatelIND1UDPRelayMIBGroups
- Branch For UDP Relay Subsystem Units Of Conformance.
- alcatelIND1UDPRelayMIBCompliances
- Branch For UDP Relay Subsystem Compliance Statements.
- iphelperTable
- A list of UDP Relay Service instances.
- iphelperEntry
- An entry in UDP Relay table
- iphelperService
- This specifies the UDP Relay Service to be forwarded.
- iphelperForwAddr
- This sets the relay's forwarding address. It can either be set to a distinct IP address (e.g. the address of a server), to an IP broadcast address or a VLAN. This setting is only used by BOOTP/DHCP service for now.
- iphelperVlan
- This allows the user to allocate a particular server address to a particular vlan. This is part of the per Vlan relay forwarding feature enhancement.
- iphelperStatus
- Row Status for creating/deleting
- iphelperStatTable
- This keeps the statistics for each service type.
- iphelperStatEntry
- An entry in the stat table.
- iphelperServerAddress
- This specifies the unique server address.
- iphelperRxFromClient
- This keeps track of the number of packets recieved from the client.
- iphelperTxToServer
- This keeps track of the number of packets transmitted to the server.
- iphelperMaxHopsViolation
- This keeps track of the number of packets dropped due to max hops violation.
- iphelperForwDelayViolation
- This keeps track of the number of packets dropped due to forward delay violation.
- iphelperResetAll
- This parameter resets all the stats.
- iphelperForwDelay
- This sets the BOOTP/DHCP relay's forwarding delay and is only used by the BOOTP/DHCP service. For other services it is ignored.It is typically set as seconds, but the value is totally client dependent.This relay will not forward frames until client frames ...
- iphelperMaxHops
- This sets the BOOTP/DHCP relay's maximum hops forwarding limit and is only used by the BOOTP/DHCP service. For other services it is ignored. If a frame arrives with hopcount greater than or equal to iphelperMaxHops, it will be dropped.
- iphelperForwardOption
- This is only significant for the BOOTP/DHCP service. It allows the relay to forward DHCP requests only when they are issued by an Authenticated Vlan client.Needed to prevent having multiple relays enabled on the same vlan. Default value is standard
- iphelperGroup
- Collection of objects for the management of parameters of UDP Relay.
- iphelperStatGroup
- Collection of objects for management of statistics for UDP Relay.
- iphelperMiscGroup
- Other independent objects of UDP Relay.
