ALCATEL-IND1-VLAN-MGR-MIB Download
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Vlan Manager for the distribution of vlan configuration information,
including the association between vlans and ports.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
IPHost Network Monitor offer an easy way of SNMP monitoring your Alcatel Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ALCATEL-IND1-VLAN-MGR-MIB
- alcatelIND1VLANMgrMIBObjects
- Branch For VLAN Manager Subsystem Managed Objects.
- alcatelIND1VLANMgrMIBConformance
- Branch For VLAN Manager Subsystem Conformance Information.
- alcatelIND1VLANMgrMIBGroups
- Branch For VLAN Manager Subsystem Units Of Conformance.
- alcatelIND1VLANMgrMIBCompliances
- Branch For VLAN Manager Subsystem Compliance Statements.
- vlanTable
- A list of Virtual LAN instances in this Falcon.
- vlanEntry
- A VLAN entry.
- vlanNumber
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vlanDescription
- Textual description of the VLAN instance.
- vlanAdmStatus
- The administrative status which can be set by configuration. Disable(1) will disable ALL vports that are connected to this VLAN, enable(2) will enable ALL ports on this VLAN, delete(3) will detach and delete the ports/routers AND remove the VLAN.
- vlanOperStatus
- Provide operating status of a particular VLAN environment.
- vlanStatus
- Row status to control creation/deletion of vlans.
- vlanStpStatus
- Indicates status of spanning tree for the current VLAN.
- vlanAuthentStatus
- Indicates status of authentication for the current VLAN.
- vlanVoiceStatus
- Indicates status of voice usage for the current VLAN.
- vlanIpAddress
- IP address of the VLAN's virtual router port. Note: a vlan does not necessarily have an ip address. Setting one requires that the ip address be set, and optionally the following since they have defaults: ip mask, ip encap, ip forward. Then setting vlanI ...
- vlanIpMask
- Subnetwork mask for VLAN IP Address. Default is class level mask for the ip address.
- vlanIpEncap
- VLAN's IP router port encapsulation. Not applicable when there is no ip router port.
- vlanIpForward
- VLAN's IP router port ip frame forwarding (disabled = ip host only). Not applicable when there is no ip router port.
- vlanIpStatus
- Provides ability to add and remove the VLAN ip address.
- vlanIpxNet
- IPX network address. Note: a vlan does not necessarily have an ipx net number. Setting one requires that the ipx net be set, and optionally the ipx encap, ipx rip-sap mode, and delay ticks (all have defaults). Then the vlanIpxStatus should be set to add ...
- vlanIpxEncap
- IPX of frame enapsulation of IPX VLAN router port. Not applicable when there is no ipx router port.
- vlanIpxRipSapMode
- IPX advertisement mode. Not applicable when there is no ipx router port.
- vlanIpxDelayTicks
- Tick metric to use for supporting IPX routing decisions.
- vlanIpxStatus
- Provides ability to add and remove the VLAN ipx network node.
- vlanTagMobilePortStatus
- When enabled for a VLAN, a mobile port will be moved to the VLAN based on the tag.
- vlanPortMacStatus
- When enabled for a VLAN, it will be considered a special VLAN not affected by the ordinary vlan commands except the command to delete a VLAN
- vlanLocalProxyArp
- When enabled for a VLAN, local proxy ARP processing happens on this= VLAN.
- vlanMtu
- Maximum transmission unit i.e. the maximum size of packet that this vlan can handle. It ranges from 512 to 1500 (for Hawk) and 10222(for Falcon and Eagle)
- vpaTable
- A list of Virtual LAN instances in this Falcon.
- vpaEntry
- A VLAN-Port Association (VPA) entry.
- vpaVlanNumber
- The VLAN number component of this instance. Valid range from 1 to 4094.
- vpaIfIndex
- The ifIndex component of this instance.
- vpaType
- The type of this vpa. Two are statically configured: configured default VPA and qTagged VPA. The other two are dynamically created according to rules/policies: dynamic default and mobile. The dynamic default VPA is the same as a mobile VPA except that i ...
- vpaState
- The state of this vpa: 1. inactive - link down 2. blocking - link up, forwarding down 3. forwarding - link up, forwarding up, sources learned normally 4. filtering - link up, forwarding up, sources filtered.
- vpaStatus
- This is used to create or delete staticPrimary VPAs (default vlans on a port ). Creation replaces the existing staticPrimary VPA while deletion replaces the existing VPA so that the vlan number is 1 for the given port. Of course the corresponding vlan a ...
- vpaPortMacType
- Value of this field will decide whether the port represented by vpaIfIndex is a ingress port or egress port. This fiels is applicable only for portMac vlans
- vlanSetVlanCount
- Count of existing VLANs on switch.
- vlanSetVlanRouterCount
- Count of VLANs on switch with at least one router port configured.
- vlanSetIpRouterCount
- Count of VLANs on switch with IP router port configured.
- vlanSetIpxRouterCount
- Count of VLANs on switch with IPX router port configured.
- vlanSetMultiRtrMacStatus
- Controls whether unique mac assigned to each vlan with router port (limit 64).
- vlanMgrVlanGroup
- Collection of objects for management of Vlan Manager VLANs.
- vlanMgrVpaGroup
- Collection of objects for management of Vlan Manager VPAs.
- vlanMgrVlanSetGroup
- Collection of objects for Vlan Manager global properties.
