C-PRODUCT-DS3-MIB Download
With the IPHost SNMP tool, you can monitor any SNMP objects of the
C-PRODUCT-DS3-MIB
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
C-PRODUCT-DS3-MIB
.
OID list for C-PRODUCT-DS3-MIB
- ds3PortTable
- The DS3 port information table.
- ds3PortEntry
- Information about a DS3 port.
- ds3PortLoopbackType
- Loopback type of the DS3 port.
- ds3PortLboLength
- Cable length for the DS3 port.
- ds3PortPeakRate
- Peak data transfer rate of the DS3 port. Unit: Mbps.
- ds3PortFraming
- Cbit or M23 framing for the DS3 port.
- ds3PortCellMap
- ATM cell mapping for the DS3 port.
- ds3PortScramble
- ATM payload scrambling for the DS3 port.
- ds3PortTiming
- DS3 timing source.
- ds3PortPlcpTiming
- PLCP timing source for the DS3 port.
- ds3PortCtxTiming
- CTX timing source from the DS3 port.
- ds3PortFeacLoopback
- FEAC loopback for the DS3 port.
- ds3PortLineRate
- Physical Line data transfer rate of the DS3 port. Unit: CPS.
- ds3PortStatsTable
- The DS3 port stats information table.
- ds3PortStatsEntry
- Information about a DS3 port stats.
- ds3PortRxCells
- The counter associated with the received cells, encountered on the ATM interface.
- ds3PortTxCells
- The counter associated with the transmitted cells, encountered on the ATM interface.
- ds3PortIdleUnassignedCells
- The counter associated with the idle/unassigned cells, encountered on the ATM interface.
- ds3PortHCSErrorCells
- The counter associated with the HCS errored cells, encountered on the ATM interface.
- ds3PortResetTimeDate
- The reset time and date of ATM stats on this ATM interface.
- ds3PortResetStats
- This field is used to reset the atm statistics for the ds3 port. If a get is performed on this command, the result will always be zero
- ds3PortUtilRxCells
- The Utilization of received Cell is calculated as received cells divided by Line Rate.
- ds3PortUtilTxCells
- The Utilization of transmitted Cell is calculated as transmitted cells divided by Line Rate.
- ds3PortClearStatsTable
- This table is used to reset the performance monitoring data for ds3 port.
- ds3PortClearStatsEntry
- Information about a DS3 port.
- ds3PortResetPMData
- This field is used to reset the performance monitoring data for the ds3 port. If a get is performed on this command, the result will always be zero
You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
