CISCO-ATM-EXT-MIB Download
This MIB is an extension to the Cisco ATM MIBmodule for managing ATM
implementations.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-ATM-EXT-MIB
- cAal5VccExtTable
- This table contains AAL5 VCC performance parameters beyond that provided by cAal5VccEntry.
- cAal5VccExtEntry
- This list contains the additinal AAL5 VCC performance parameters beyond that provided by cAal5VccEntry.
- cAal5VccExtCompEnabled
- Boolean, if compression enabled for VCC.
- cAal5VccExtVoice
- Boolean, TRUE if VCC is used to carry voice.
- cAal5VccExtInF5OamCells
- Number of OAM F5 end to end loopback cells received through the VCC.
- cAal5VccExtOutF5OamCells
- Number of OAM F5 end to end loopback cells sent through the VCC.
- catmxVclOamTable
- This table contains Virtual Channel Link (VCL) Oam configuration and state information. This table augments the atmVclTable.
- catmxVclOamEntry
- This list contains Virtual Channel Link (VCL) configuration and state information beyond that provided by atmVclEntry.
- catmxVclOamLoopbackFreq
- Specifies OAM loopback frequency.
- catmxVclOamRetryFreq
- Specifies OAM retry polling frequency.
- catmxVclOamUpRetryCount
- Specifies OAM retry count before declaring a VC is up.
- catmxVclOamDownRetryCount
- Specifies OAM retry count before declaring a VC is down.
- catmxVclOamEndCCActCount
- Specifies OAM End-to-end Continuity check (CC) Activation retry count.
- catmxVclOamEndCCDeActCount
- Specifies OAM End-to-end Continuity check (CC) Deactivation retry count.
- catmxVclOamEndCCRetryFreq
- Specifies OAM End-to-end Continuity check (CC) Activation/Deactivation retry frequency.
- catmxVclOamSegCCActCount
- Specifies OAM Segment Continuity check (CC) Activation retry count.
- catmxVclOamSegCCDeActCount
- Specifies OAM Segment Continuity check (CC) Deactivation retry count.
- catmxVclOamSegCCRetryFreq
- Specifies OAM Segment Continuity check (CC) Activation/Deactivation retry frequency.
- catmxVclOamManage
- Specifies OAM Enable/Disable on the VC. true(1) indicates that OAM is enabled on the VC. false(2) indicates that OAM is disabled on the VC.
- catmxVclOamLoopBkStatus
- Indicates OAM loopback status of the VC. disabled(1) -- No OAMs on this VC. sent(2) -- OAM sent, waiting for echo. received(3) -- OAM received from target. failed(4) -- Last OAM did not return.
- catmxVclOamVcState
- Indicates the state of VC OAM. downRetry(1) -- Loopback failed. Retry sending loopbacks with retry frequency. VC is up. verified(2) -- Loopback is successful. notVerified(3) -- Not verified by loopback, AIS/RDI conditions are cleared. upRetry(4) ...
- catmxVclOamEndCCStatus
- Indicates OAM End-to-end Continuity check (CC) status.
- catmxVclOamSegCCStatus
- Indicates OAM Segment Continuity check (CC) status.
- catmxVclOamEndCCVcState
- Indicates OAM End-to-end Continuity check (CC) VC state.
- catmxVclOamSegCCVcState
- Indicates OAM Segment Continuity check (CC) VC state.
- catmxVclOamCellsReceived
- Indicates the number of OAM cells received on this VC.
- catmxVclOamCellsSent
- Indicates the number of OAM cells sent on this VC.
- catmxVclOamCellsDropped
- Indicates the number of OAM cells dropped on this VC.
- catmxVclOamInF5ais
- Indicates the number of received OAM F5 Alarm Indication Signal (AIS) cells from the VC.
- catmxVclOamOutF5ais
- Indicates the number of transmitted OAM F5 Alarm Indication Signal (AIS) cells to the VC.
- catmxVclOamInF5rdi
- Indicates the number of received OAM F5 Remote Detection Indication (RDI) cells from the VC.
- catmxVclOamOutF5rdi
- Indicates the number of transmitted OAM F5 Remote Detection Indication (RDI) cells to the VC.
- ciscoAal5ExtMIBGroup
- A collection of objects providing AAL5 related parameters.
- ciscoAtmExtVclOamGroup
- A collection of objects providing Virtual Channel Link (VCL) OAM configuration and state information.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
