CISCO-ATM-IF-MIB Download

ciscoAtmIfIlmiAccessGlobalDefaultFilter

The global default access filter which set the per-switch default access filter for ILMI address registration on all interfaces. permitAll - This permits all ILMI registered addresses. permitPrefix - The address being registered by ILMI should have their ...

ciscoAtmIfNotifsEnabled

Allows enabling/disabling of notifications for ATM Interface events

ciscoAtmIfTable

This table contains ATM local interface configuration parameters, one entry per ATM interface port.

ciscoAtmIfEntry

This list conatins additonal ATM interface configuration parameters and state variables.

ciscoAtmIfType

The type of ATM interface which is either a UNI (User to Network), PNNI, IISP or NNI PVC only. To modify the ciscoAtmIftype, ifAdminStatus has to be down and atmIfIlmiAutoConfiguration disabled.

ciscoAtmIfSide

The side of ATM interface which is either a user or network side.NotApplicable value implies that ciscoAtmIftype is other than uni or iisp.

ciscoAtmIfUniType

The type of User to Network interface is either private or public. If ciscoAtmIfType is not uni then ciscoAtmIfUniType value should be ignored.

ciscoAtmIfPVPs

The number of permanent virtual paths at this interface.

ciscoAtmIfPVCs

The number of permanent virtual channels at this interface.

ciscoAtmIfActiveSVPs

The number of active switched virtual paths at this interface.

ciscoAtmIfActiveSVCs

The number of active switched virtual channels at this interface.

ciscoAtmIfTotalConnections

The total number of existing connections at this interface.

ciscoAtmIfConfVplIf

The number of configured VP interfaces at this physical interface.

ciscoAtmIfPortType

The type of physical layer medium on the port.

ciscoAtmIfXmitLed

The transmit LED color of this port.

ciscoAtmIfRecvLed

The receive LED color of this port.

ciscoAtmIfXmitCells

The number of cells transmitted of this interface, including p2p and p2mp cells.

ciscoAtmIfRecvCells

The number of cells received of this interface, including p2p and p2mp cells.

ciscoAtmIfSvcMinVci

The minimum of the range of values from which VCI's are assigned to new SVC connections. By this value being larger, more VCI's are reserved for setting up PVCs. This applies to every VPI of the physical interface and every logical port. The object is dep ...

ciscoAtmIfIlmiConfiguration

Enable/Disable ILMI configuration on this interface. The configuration takes effect only on the next interface restart. Disabling this object will also disable atmIfIlmiAddressRegistration and atmIfIlmiAutoConfiguration and atmIfIlmiKeepAlive

ciscoAtmIfIlmiAddressRegistration

Enable/Disable ILMI Address Registration on on this interface. The configuration takes effect only on the next interface restart.

ciscoAtmIfIlmiAutoConfiguration

Enable/Disable ILMI link and interface type determination. The configuration takes effect only on the next interface restart.

ciscoAtmIfIlmiKeepAlive

The amount of time that should elapse between successive ILMI keepalive messages sent on this interface. A value of 0 disables ILMI keepalive messages on this interface.

ciscoAtmIfSoftVcDestAddress

The 20 byte ATM address of the destination ATM interface for soft ATM PVC/PVP

ciscoAtmIfUniSignallingVersion

The version of UNI signalling that is currently being used on the interface. The appropriate value, either atmfUni3Dot0, atmfUni3Dot1 or atmfUni4Dot0, is used when the interface is an UNI or IISP interface. The value notApplicable is used when the interf ...

ciscoAtmIfSvcUpcIntent

Determines the policing (Usage Parameter Control or UPC) action to take for SVCs established through this interface. Values other than passing are allowed only if policing is supported on the interface. Also serves to determine UPC to use on the terminati ...

ciscoAtmIfAddressType

An indication of the type of the ATM addresses on this interface. To configure a new atm address, set ciscoAtmIfAddress to the address, then set this object to ether nsap(1), or esi(2), or e164(3), depending on the type of address of ciscoAtmIfAddress. To ...

ciscoAtmIfAddress

The ATM address of this interface, which can be either nsap, esi or e164. For the switch, the nsap/esi address can only exist on the cpu port.

ciscoAtmIfWellKnownVcMode

Indicates whether well-known VCs should be automatically or manually created for the interface. In automatic(1) mode, well-known VCs will be created with default VPI/VCI values upon startup or upon entry to the automatic mode. While in this mode, well-kn ...

ciscoAtmIfSignallingAdminStatus

Enable/Disable signalling/sscop on this interface.The disabled(2) action causes all the active SVCs on this interface to be cleared.

ciscoAtmIfCdLed

The Cd LED color of this port.

ciscoAtmIfIlmiAccessFilter

The access filter which allows or denies certain ILMI registered addresses on this interface when ciscoAtmIfIlmiAddressRegistration is set to enable(1). permitAll - This permits all ILMI registered addresses. permitPrefix - The address being registered by ...

ciscoAtmIfConfigAESA

The ATM End System Address (AESA) of this interface can be configured by entering the full 20 octet AESA, or the 6 octet ESI and 1 octet Selector Byte. If the ESI and Selector Byte are entered, the full AESA will be formed using a 13 octet prefix from ILM ...

ciscoAtmIfDerivedAESA

The ATM End System Address (AESA) of this interface. The AESA is configured using ciscoAtmIfConfigAESA or can be automatically generated. A length of zero indicates that no AESA is specified. For the switch, the AESA address can only exist on the cpu port ...

ciscoAtmIfE164Address

The ATM E164 address of this interface. When a native E.164 number is configured for this inteface, only native E.164 numbers are transmitted/received as the called/calling party numbers. The presence of an ATM E164 address allows both an algorithmic tran ...

ciscoAtmIfE164AutoConversionOnly

Enable/Disable E164 auto conversion only on this interface. The E164 auto-conversion allows for algorithmic translation between the native E164 number and E164 AESA address formats. This object is used when there is no native E.164 number specified for th ...

ciscoAtmIfRxCellUpcViolations

The total number of nonconforming cells detected by Usage Parameter Control (UPC) for cells received on this interface. This object is not instantiated on systems that do not have support for collecting such statistics.

ciscoAtmIfRxCellDiscards

The total number of cells that were discarded within the switch. The cells can be discarded due to non conformance detected by Usage Parameter Control (UPC) or queue overflows within the switch. This object is not instantiated on systems that do not have ...

ciscoAtmIfIlmiFSMState

The ILMI states meaningful when the value of ciscoAtmIfIlmiConfiguration indicates that the ILMI is enabled for an ATM interface: down -- Stopped or just booted or interface down restarting -- Establishing link connectivity waitDevTy ...

ciscoAtmIfIlmiUpDownChanges

The number of times ILMI enters and leaves the state of upAndNormal.

ciscoAtmIfSscopFSMState

The SSCOP state for an ATM interface as defined by the ITU-T. The state is idle when the interface is down or SSCOP is not enabled on the ATM interface

ciscoAtmIfSscopUpDownChanges

The number of times SSCOP enters and leaves the state of DataTransferReady.

ciscoAtmIfSvcUpcIntentCbr

Determines the policing (Usage Parameter Control or UPC) action to take for Constant Bit Rate SVCs established through this interface. Values other than passing are allowed only if policing is supported on the interface. Also serves to determine UPC to us ...

ciscoAtmIfSvcUpcIntentVbrRt

Determines the policing (Usage Parameter Control or UPC) action to take for Variable Bit Rate - Real Time SVCs established through this interface. Values other than passing are allowed only if policing is supported on the interface. Also serves to determi ...

ciscoAtmIfSvcUpcIntentVbrNrt

Determines the policing (Usage Parameter Control or UPC) action to take for Variable Bit Rate - Non Real Time SVCs established through this interface. Values other than passing are allowed only if policing is supported on the interface. Also serves to det ...

ciscoAtmIfSvcUpcIntentAbr

Determines the policing (Usage Parameter Control or UPC) action to take for Available Bit Rate SVCs established through this interface. Values other than passing are allowed only if policing is supported on the interface. Also serves to determine UPC to u ...

ciscoAtmIfSvcUpcIntentUbr

Determines the policing (Usage Parameter Control or UPC) action to take for Unspecified Bit Rate SVCs established through this interface. Values other than passing are allowed only if policing is supported on the interface. Also serves to determine UPC to ...

ciscoAtmIfMIBGroup

A collection of objects providing the information about ATM interface related information also an ability to configure certain parameters of ATM interface.

ciscoAtmIfMIBGroup2

Additional collection of objects providing ATM interface related information.

ciscoAtmIfMIBGroup3

Additional collection of objects providing ATM interface related information.

ciscoAtmIfMIBGroup4

Additional collection of objects providing ATM switch and interface related information on Access Filter for ILMI Address Registration.

ciscoAtmIfMIBGroup5

Additional collection of objects providing ATM switch and interface related information for ATM Addresses.

ciscoAtmIfMIBGroup6

Additional collection of objects providing ATM interface related information.

ciscoAtmIfMIBGroup7

Additional collection of objects providing ATM switch interface Resource Manager, ILMI and Signalling related information.

ciscoAtmIfMIBGroup8

Additional collection of objects providing ATM interface related information.

ciscoAtmIfMIBGroup9

A collection of objects providing the information about ATM interface related information also an ability to configure certain parameters of ATM interface.

ciscoAtmIfMIBGroup10

Additional objects providing means to enable/disable notifications related to the interface ILMI and SSCOP state