CISCO-BCP-MIB Download

bcpOperTable

Table containing the status of the local BCP entity that is related to the operation of Bridging Control Protocol.

bcpOperEntry

Operational status information for a particular BCP link. For all entries in ifTable with ifType ppp(23), there will be an entry in this table.

bcpOperStatus

The operational status of the Bridge Control Protocol. The possible values are : open(1) - the BCP link is up and both ends are configured in the compatible manner. closed(2) - the BCP link is down and neither ends are configured. listening(3) - the loc ...

bcpConfigTable

Table containing the configuration information for the local BCP entity that is related to the operation of Bridging over the PPP link.

bcpConfigEntry

Bridging Configuration information for a particular BCP link. For all entries in ifTable with ifType ppp(23), there will be an entry in this table.

bcpConfigBridgeIdControl

The Bridge-Identification configuration option is designed for use when the line is an interface between half bridges connecting virtual or physical LAN segments. When enabled the local BCP entity initiates a Bridge Identification Option negotiation.

bcpConfigBridgeId

The bridge number of the local BCP entity. This value is meaningful only when the local BCP entity has negotiated the BridgeId Configuration option, which means the value of bcpConfigBridgeIdControl is enabled(1). The two half bridges must agree on the br ...

bcpConfigLineIdControl

The Line-Identification configuration option is designed for use when the line is assigned a LAN segment number. When enabled the local BCP entity initiates a Line Identification Option negotiation.

bcpConfigLineId

The LAN segment number of the local BCP entity. This value is meaningful only when the local BCP entity negotiated the LineId Configuration option, which means the value of bcpConfigLineIdControl is enabled(1). The two half bridges must agree on the LAN s ...

bcpConfigMacSupport

The Mac-Support configuration option is provided to permit implementations to indicate the sort of traffic they are prepared to receive. When enabled the local BCP entity initiates a Mac-Support Option negotiation.

bcpConfigMacType

The MAC type that this local BCP entity is prepared to receive and service. This value is meaningful only when the local BCP entity has negotiated the MAC-Support Configuration option, which means the value of bcpConfigMacSupport is enabled(1). These valu ...

bcpConfigTinygram

The Tinygram-Compression configuration option permits implementations to indicate support for Tinygram Compression. When enabled the local BCP Entity initiates a Tinygram-Compression Option negotiation.

bcpConfigMacAddressControl

The Mac-Address configuration option enables the implementations to announce its MAC address or have one assigned. When enabled the local BCP Entity initiates a Mac-Address Option negotiation.

bcpConfigMacAddress

This value is meaningful only when the local BCP entity has negotiated the MAC-Address configuration option, which means the value of bcpConfigMacAddressControl is enabled(1). If it is non-zero format, the local BCP get its MAC address announced. It is re ...

bcpConfigSpanTreeControl

The Spanning-Tree-Protocol configuration option enables a bridge to remain compatible with older implementations of BCP. When enabled the local BCP Entity initiates a Spanning-Tree-Protocol Option negotiation.

bcpConfigSpanTree

The desired spanning tree protocol of the local BCP entity. The listing values of the Spanning- Tree Protocol are specified in the most recent RFC1700. This value is meaningful only when the local BCP entity has negotiated the Spanning-Tree-Protocol confi ...

bcpConfigIeee802dot1qTagged

The IEEE-802-Tagged-Frame configuration option permits the implementation to support for IEEE 802.1q Tagged Frame. When enabled the local BCP Entity initiates a IEEE-802-Tagged-Frame Option negotiation.

bcpConfigMgmtInline

The Management-Inline configuration option indicates that the system is willing to receive any IEEE-defined inter-bridge protocols. When enabled if the local BCP Entity initiates a Management-Inline Option negotiation.

bcpConfigBCPacketIndicator

The Bridge Control Packet Indicator configuration option permits the implementation to indicate support for Bridge Control Packet Indicator. When enabled the local BCP Entity initiates a Bridge Control Packet Indicator Option negotiation.

cBcpMIBGroup

A collection of objects providing the configuration and operating status of the BCP entity.