CISCO-CALLHOME-MIB

CISCO-CALLHOME-MIB Download

MIBs list

The MIB module for the management of Call Home feature within the framework of Cisco's Call Home architecture.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-CALLHOME-MIB

callHomeEnable
This object enables/disables the Call Home infrastructure on the local device.
sysContactPhoneNumber
The phone number of the contact person for this managed node. The phone number must start with '+' and contains only numeric characters except for space and '-'. Some valid phone numbers are +44 20 8332 9091 +45 44886556 +81-46-215-4678 +1-650-327-2600 A ...
sysContactEmailAddress
The email address of the contact person for this managed node. The format of this object is an an e-mail address which conforms to RFC822 and RFC1123 'addr-spec' syntax. Some valid Email Addresses are raj@helpme.com, bob@service.com, mtom@abc.caview.ca.us ...
sysStreetAddress
The mailing address of this managed node.
callHomeCustomerId
A string, in whatever format is appropriate, to identify the customer.
callHomeContractId
A string, in whatever format is appropriate, to identify the support contract between the customer and support partner.
callHomeSiteId
A location identifier of this device.
callHomeDeviceServicePriority
The service priority of the device. This determines how fast the device has to be serviced.
callHomeAlertAction
This object acts as a trigger by which the generation of a particular type of alert can be verified. Specifically, setting this object to a type of alert triggers the sending of a Call Home message for the specified type so that the Call Home backend is ...
callHomeAlertActionStatus
This object provides the status of the last Call Home action invocation. unknown (1) - unknown successful (2) - successful inprogress (3) - action in progress failed (4) - failed If the value of this object is 'failed', then the callHomeAlertAc ...
callHomeAlertActionFailureCause
This object provides the failure cause for the last Call Home test invocation. Note that this object is valid only if value of callHomeAlertActionStatus is 'failed'.
callHomeDestProfileTable
This table contains destination profiles. The Call Home feature requires the destination profiles to be setup to be able to send the Call Home messages to destinations configured.
callHomeDestProfileEntry
An entry containing information about a Call Home destination.
callHomeDestProfileName
Name of the destination profile.
callHomeDestProfileMsgFormat
The Call Home format used with profile while sending the message.
callHomeDestProfileMaxMsgSize
Maximum message size that can be sent to destination pointed to by this destination profile. Implementations are allowed to assign default value. A value of 0 for this object indicates no limitation on maximum message size that can be sent to destination ...
callHomeDestProfileTrnsprtMthd
Call Home transport method used to deliver the alert messages.
callHomeDestProfileStatus
Status of this row.
callHomeDestProfileMsgLevel
This object contains the threshold level, used for filtering alert messages sent to a destination. Call Home alert message with severity level lower than the configured threshold level would not be sent. The default threshold level is debug (1), which mea ...
callHomeDestProfileAlertGroups
This object represent the list of configured alert groups for this destination profile. User can modify the configured alert groups, by Setting/Resetting the appropriate bits in this object. Setting a bit to '1' means that the alert group is configured an ...
callHomeDestProfileActive
The object specifies whether the profile is active. A value of 'true' indicates that the profile is active. A value of 'false' indicates that the profile is not active.
callHomeDestProfileHiMaxMsgSize
Maximum size of the message that can be sent to destination pointed to by this destination profile. A value of zero for this object indicates that there is no limitation on maximum size of message that can be sent to destination pointed to by this destina ...
callHomeEmailAddrTblMaxEntries
The maximum number of entries that the agent supports in the callHomeDestEmailAddressTable. A value of zero indicates no limitation on the number of entries in callHomeDestEmailAddressTable.
callHomeDestEmailAddressTable
This table contains email addresses and HTTP URLs for the destination profiles.
callHomeDestEmailAddressEntry
An entry containing information about a Call Home destination email address or a destination HTTP URL.
callHomeDestEmailAddressIndex
An arbitrary integer value, greater than zero, and less than and equal to callHomeEmailAddrTblMaxEntries, which identifies an Email address. The object can be any value in the supported range if the value of callHomeEmailAddrTblMaxEntries is zero. These i ...
callHomeDestEmailAddress
The email address associated this destination profile. The format of this object is an an e-mail address which conforms to RFC822 and RFC1123 'addr-spec' syntax. Some examples are raj@helpme.com, bob@service.com, mtom@abc.caview.ca.us. A set operation on ...
callHomeDestEmailAddressStatus
Status of this row.
callHomeDestType
The type of this destination address. email - This destination address is an email address. Object callHomeDestHttpUrl is irrelevant and can not be set. http - This destination address is an HTTP URL address. Object callHomeDestEmailAddress is irrelevant ...
callHomeDestHttpUrl
The HTTP URL associated with this destination profile. This object may not be modified while the value of the corresponding instance of callHomeDestEmailAddressStatus is 'active'.
callHomeEmailFrom
The email address that is to be used in the 'From' field when sending the email using SMTP. The format of this object is an e-mail address which conforms to RFC822 and RFC1123 'addr-spec' syntax. Some examples are raj@helpme.com, bob@service.com, mtom@abc ...
callHomeEmailReplyTo
The email address that is to be used in the 'Reply-To' field when sending the email using SMTP. The format of this object is an e-mail address which conforms to RFC822 and RFC1123 'addr-spec' syntax. Some examples are raj@helpme.com, bob@service.com, mtom ...
callHomeEmailMsgDispNotification
The email address to which the Message Disposition Notification (also called 'Return Receipt') sent when the email sent from this device is read by the receiver. The format of this object is an an e-mail address which conforms to RFC822 and RFC1123 'addr- ...
callHomeSmtpServerAddrType
Address Type of the SMTP server.
callHomeSmtpServerAddr
Address of the SMTP server.
callHomeSmtpServerPort
Port of the SMTP server.
ccmSmtpServersTblMaxEntries
Indicates the maximum number of SMTP servers supported by this device. A value of zero indicates no limitation on the number of SMTP servers.
ccmSmtpServersTable
This table contains a list of SMTP servers that may be used to send out Call Home e-mail messages. An entry is created and deleted by using ccmSmtpServersStatus. The maximum number of entries that can be created in this table is limited by the object ccmS ...
ccmSmtpServersEntry
An entry containing information about an SMTP server.
ccmSmtpServersAddrType
Address Type of the SMTP server.
ccmSmtpServersAddr
Address of the SMTP server.
ccmSmtpServersPort
Port of the SMTP server.
ccmSmtpServersStatus
The status object used to manage the rows in this table. Objects in this conceptual row may not be modified while the value of this object is 'active'.
ccmSmtpServersPriority
The priority of of this entry relative to other entries. System will attempt to contact SMTP servers in the order of their priority values. For servers with different values of ccmSmtpServersPriority, the server with lowest value has highest priority. For ...
ccmSmtpServersUseVrf
The Virtual Routing and Forwarding (VRF) domain configured for this SMTP server. A zero length string indicates that there is no VRF domain configured and the default VRF domain is used
callHomeLastAlertSent
The value of sysUpTime when the last Call Home alert was sent.
callHomeAlerts
The number of Call Home alerts sent.
callHomeHCAlerts
The number of Call Home alerts sent. This object is a 64-bit version of callHomeAlerts
ccmAlertsDropped
The number of Call Home alerts dropped due to rate limiting configured through ccmAlertRateLimit.
ccmEventStatsTable
This table contains a list of Call Home message type for each Call Home event. An entry will exist for each call-home message type which supports Call Home event statistics.
ccmEventStatsEntry
An entry containing Call Home event statistics for a particular Call Home message type.
ccmEventStatsTypeIndex
This object indicates the type of Call Home event. 'successful' - Call Home messages were generated successfully for corresponding Call Home event. 'inQueue' - Call Home events are queued for processing. 'dropped' - Call Home events were dropped due ...
ccmEventStatsMsgTypeIndex
This object indicates the type of Call Home message. 'total' - statistics based on all the message types. 'email' - statistics for Call Home messages which use e-mail transport. 'http' - statistics for Call Home messages which use http transport.
ccmEventStatsTotal
Total number of Call Home events.
ccmEventStatsConfiguration
The number of Configuration Call Home events.
ccmEventStatsDiagnostic
The number of Diagnostic Call Home events.
ccmEventStatsEnvironment
The number of Environment Call Home events.
ccmEventStatsInventory
The number of Inventory Call Home events.
ccmEventStatsSystemLog
The number of System Log Call Home events.
ccmEventStatsTest
The number of Test Call Home events.
ccmEventStatsRequest
The number of Request Call Home events.
ccmEventStatsSendCliOutput
The number of Send-CLI-Output Call Home events.
ccmSmtpServerStatusTimeStamp
This object indicates the time when ccmSmtpServerStatusTable was last updated, either by a SNMP Servers check by ccmSmtpServerStatusInitiate or by a change in the SMTP servers configured in ccmSmtpServersTable.
ccmSmtpServerStatusInitiate
A control object used to initiate the availability status check of the SMTP Servers configured in ccmSmtpServersTable. Setting this object to 'true' will check the status of the SMTP servers and update the status in ccmSmtpServerStatusTable. This object c ...
ccmSmtpServerStatusResult
This object provides the status of the last SMTP status check initiated by ccmSmtpServerStatusInitiate. Management stations could read value of this object after a successful set of the ccmSmtpServerStatusInitiate object to find out the result of the SMTP ...
ccmSmtpServerStatusTable
A list of SMTP servers. An entry will exist for each SMTP server which is configured in the ccmSmtpServersTable if the value of ccmSmtpServerStatusResult is 'successful'.
ccmSmtpServerStatusEntry
An entry containing availability status of a particular SMTP Server.
ccmSmtpServerStatusAvailability
This variable indicates whether the SMTP Server is currently available.
ccmOnDemandMsgServAvailable
This object indicates whether the system is ready to generate on demand Call Home messages. A value of 'true' indicates that the system is ready to generate on demand Call Home messages. A value of 'false' indicates that sending of on demand Call Home mes ...
ccmSysLogSeverity
Different devices implementing this mib may use different criteria for issuing Call Home alerts. For the devices that issue Call Home alerts based on severity level of the syslog messages generated on the device, this object determines syslog severity lev ...
ccmEnableSmtpServerNotif
This variable indicates whether the system produces the ccmSmtpServerFailNotif. A false value for this object will prevent ccmSmtpServerFailNotif notification being generated by the device.
callHomeAlertGroupTypeTable
This table contains information about all the alert groups types supported in the system. An entry is created if a new alert group becomes available in the system. An entry is deleted if the alert group becomes unavailable.
callHomeAlertGroupTypeEntry
An entry containing information about a particular Call Home alert group type in the system.
callHomeAlertGroupTypeIndex
This object represents the index corresponding to the particular alert group type configured in the system.
callHomeAlertGroupName
This object represents the name of alert group configured in the system.
callHomeAlertGroupEnable
This object enables or disables the alert group for the system. A value of 'true' for this object enables and a value of 'false' for this object disables the alert group. Call Home messages are generated only for those alert groups which are enabled in th ...
callHomeAlertGroupCapability
This object indicates the method used by alert group to generate Call Home messages. callHomeMessageSeverity - Call Home alert is generated based only on the level of severity. periodic - Call Home alert is generated periodically. regularExpression - Call ...
callHomeSwInventoryTable
This table contains inventory information about all the software services currently enabled in the system. When a software service is disabled from the system, all the entries corresponds to that software service will be deleted automatically from the tab ...
callHomeSwInventoryEntry
An entry containing information about the name value pair for a particular software service enabled in the system.
callHomeSwServiceName
This object represents the name of software service enabled in the system.
callHomeInventoryNVPairIndex
This object represents the index corresponds to the name value pair for a particular software service enabled in the system. The name value pair is a 'tuple' of (inventory info-name, and inventory info-value) and this object uniquely identifies a value of ...
callHomeInventoryInfoName
This object represents the name of a feature , for a particular software service enabled in the system. For example, the value of this object could be 'number of VSAN' for the software service 'vsan_manager'.
callHomeInventoryInfoValue
This object represents the value for the feature name specified in the corresponding instance of 'callHomeInventroyInfoName' object. For example, the value of this object could be '10' for the corresponding instance of 'callHomeInventroyInfoName' object w ...
ccmPeriodicSwInventoryMsgEnable
This object enables/disables the sending of periodic software inventory Call Home message on the system.
ccmPeriodicSwInventoryTimeFrame
This object represents the time frame for sending the periodic software inventory Call Home message, if the periodic software inventory is enabled on the system i.e., the value of 'ccmPeriodicSwInventoryMsgEnable' object is set to 'true'.
ccmMsgThrottlingEnable
This object enables/disables the message throttling mechanism implemented on the system. The message throttling mechanism limits the number of Call Home messages for a alert type, sent with in a time frame. The maximum number of Call Home alert messages t ...
ccmSeverityAlertGroupTable
A list of severity type alert groups which are currently configured for each of the profiles in the device. An entry is created if a configured alert group whose callHomeAlertGroupCapability has 'callHomeMessageSeverity'. An entry is deleted if the destin ...
ccmSeverityAlertGroupEntry
An entry containing severity configuration information for a particular alert group in a profile.
ccmAlertGroupSeverity
This object specifies the minimum severity level, associated with alert group for a destination profile. Call Home alert messages for this alert group with severity level lower than one configured for this object will not be issued by the system. The defa ...
ccmPeriodicAlertGroupTable
A list of periodic type alert groups which are currently configured in the device. An entry is created if a configured alert group whose callHomeAlertGroupCapability has 'periodic'. An entry is deleted if the destination profile unsubscribes an periodic a ...
ccmPeriodicAlertGroupEntry
An entry containing periodic configuration information for a particular alert group in a profile.
ccmPeriodicAlertGroupInterval
This object specifies the type of periodic configuration for this alert group. This object is only instantiated when the value of corresponding instance of ccmPeriodicAlertGroupEnable is 'true'. A value of 'daily' indicates that periodic message will be g ...
ccmPeriodicAlertGroupDayOfWeek
This object specifies the day of the week on which user wishes to receive periodic Call Home alert messages for this entry. This object is only instantiated when the value of corresponding instance of ccmPeriodicAlertGroupEnable is 'true' and the value of ...
ccmPeriodicAlertGroupDayOfMonth
This object specifies the day of the month on which user wishes to receive periodic Call Home alert messages for this entry. If the day specified is beyond the last day of a month, the alert message will be generated on the last day of that month. This ob ...
ccmPeriodicAlertGroupHour
This object specifies the hours component of time (24 hour format) at which the daily/weekly/monthly periodic Call Home alert messages will be generated for this entry. This object is only instantiated when the value of corresponding instance of ccmPeriod ...
ccmPeriodicAlertGroupMinute
This object specifies the minutes component of time at which the daily/weekly/monthly periodic Call Home alert messages will be generated for this entry. This object is only instantiated when the value of corresponding instance of ccmPeriodicAlertGroupEna ...
ccmPeriodicAlertGroupEnable
This object specifies whether sending Call Home messages periodically is enabled.
ccmMaxSyslogAlertGroupPatterns
The object dictates the maximum number of entries in the ccmPatternAlertGroupTable which may be created with same value for index callHomeDestProfileName. A value of zero for this object indicates that there is no limitation on maximum number of entries t ...
ccmPatternAlertGroupTable
A list of pattern used by the pattern type alert groups which are currently configured in the device. An entry is created if a configured alert group whose callHomeAlertGroupCapability has 'regularExpression'. An entry is deleted if the destination profil ...
ccmPatternAlertGroupEntry
An entry containing properties for a pattern which is used to match against system syslog messages.
ccmAlertGroupPattern
The object contains a regular expression. Regular Expressions: ------------------- A regular expression is a pattern (a phrase, number, or more complex pattern): Regular expressions are case sensitive and allow for complex matching requirements. Simple re ...
ccmPatternAlertGroupSeverity
This object specifies the severity level, used for filtering Call Home messages in conjunction with ccmAlertGroupPattern to be issued to destinations associated with this entry. Call Home alert messages for this alert group, with severity level lower than ...
ccmPatternAlertGroupStorage
The storage type for this conceptual row.
ccmPatternAlertGroupStatus
Object to manage creation and deletion of rows in this table.
callHomeUserDefMaxCmds
The maximum number of CLI commands that the system supports in the callHomeUserDefCmdTable for a particular alert group type represented by the callHomeAlertGroupTypeIndex object. A value of zero for this object indicates that the number of CLI commands s ...
ccmEventDescription
This object indicates the description of the Call Home event that occurred in the system.
ccmEventTime
This object indicates Time when the last Call Home alert was triggered.
ccmEventUrgencyLevel
This object specifies the minimum urgency level, associated with Call Home event that occurred in the system.
callHomeUserDefCmdTable
Call Home alert messages are sent with output of some pre-defined commands run in the system. This table provides an option for the user to specify a CLI(Command Line Interface) command or set of CLI commands to be executed when some important failures oc ...
callHomeUserDefCmdEntry
An entry containing information about a user specified CLI command for a Call Home alert group type in the system. The index object 'callHomeAlertGroupTypeIndex' represents the alert group type to which the user specified CLI command should be associated. ...
callHomeUserDefCmdIndex
An arbitrary integer identifying the user specified CLI command for a particular callHomeAlertGroupTypeIndex.
callHomeUserDefCmdName
This object represents a CLI command to be executed and whose output should be sent with the Call Home alert message. The implementation of this object does not do any syntax or semantic validation of the CLI command specified as a value of the object. Th ...
callHomeUserDefCmdRowStatus
Status of this row.
ccmEventAlertGroupTable
A list of event type alerts groups which are currently configured in the device. An entry is created if a configured alert group whose callHomeAlertGroupCapability has 'event'. An entry is deleted if the destination profile unsubscribes an event alert gro ...
ccmEventAlertGroupEntry
An entry containing configuration information about the 'event' alert group configured for a profile.
ccmEventAlertGroupEnable
This object specifies whether sending Call Home messages based on alert group event is enabled.
ccmEventAlertGroupOperSeverity
This object indicates the severity level used in the Call Home messages.
ccmDestProfileTestTable
This table lists status information about the profiles configured on this device. An entry will be created in this table, for each destination profile configured in callHomeDestProfileTable. An entry will be deleted from this table if a destination profil ...
ccmDestProfileTestEntry
An entry containing control and status information pertaining to test on a destination profile.
ccmDestProfileTestTrigger
This object acts as a trigger by which the generation of test message for a profile can be triggered. Setting this object to 'true' will casue system to generate a test message for a corresponding destination profile. Setting this object to 'false' has no ...
ccmDestProfileTestMessage
This object specifies the content of the message used for the test operation. If this object contains zero-length string, a default test message will be used.
ccmDestProfileTestStatus
This object provides the status of the last test triggered for this destination profile. unknown (1) - unknown successful (2) - successful inprogress (3) - action in progress failed (4) - failed If the value of this object is 'failed', then the ...
ccmDestProfileTestFailureCause
This object provides the failure cause for the last test performed on this profile. Note that this object is valid only if value of ccmDestProfileTestStatus is 'failed'.
ccmSmtpMsgSendFailNotifEnable
This variable controls generation of ccmSmtpMsgSendFailNotif. A value of 'true' for this object will enable ccmSmtpMsgSendFailNotif notification on the system. A value of 'false' for this object will disable ccmSmtpMsgSendFailNotif notification on the sys ...
ccmPeriodicSwInventoryTimeOfDay
This object represents the time of day for sending the periodic software inventory Call Home message, if the periodic software inventory is enabled on the system ie., the value of 'ccmPeriodicSwInventoryMsgEnable' object is set to 'true'. The input should ...
ccmAlertRateLimit
The rate-limit, in alerts per minute, of call home alerts generated by the system. Upon exceeding the rate, the alert is dropped.
ccmHttpProxyServerAddrType
This object specifies the type of the HTTP proxy server as represented by the value 'ccmHttpProxyServerAddr'.
ccmHttpProxyServerAddr
This object specifies the address of the HTTP proxy server. The type of this address is indicated by the value of 'ccmHttpProxyServerAddrType'.
ccmHttpProxyServerPort
This object specifies the port of the HTTP proxy server.
ccmHttpProxyServerUseEnable
This object enables/disables the use of HTTP proxy server configured for sending callhome messages over HTTP. A value of 'true' specifies that proxy server will be used. A value of 'false' specifies that the proxy server will not be used.
callHomeSmtpServerUseVrf
The Virtual Routing and Forwarding (VRF) domain configured for this SMTP server. A zero length string indicates that there is no VRF domain configured and the default VRF domain is used A 'set' operation with zero length string indicates that there is no ...
ccmHttpTransportUseVrf
The Virtual Routing and Forwarding (VRF) domain configured for HTTP transport in callhome. A zero length string indicates that there is no VRF domain configured and the default VRF domain is used A 'set' operation with zero length string indicates that th ...
ccmOnDemandMsgSendAlertGroup
The object specifies the alert group for which on demand Call Home message should be generated. Only those alert groups whose corresponding instance of callHomeAlertGroupCapability has 'onDemand' or 'onDemandPerEntity', may be set for this object.
ccmOnDemandMsgSendProfile
This object specifies the name of the profile for which the on demand Call Home messages should be generated. A zero length string for this object indicates that on demand Call Home messages are generated for all profiles.
ccmOnDemandMsgSendEntPhyIndex
This object specifies the value of entPhysicalIndex of the physical entity for which the on demand Call Home messages should be generated. Only those entities which support generation of on demand Call Home messages may be specified for this object. The v ...
ccmOnDemandMsgSendTrigger
Object to trigger on demand Call Home messages. Setting the object to 'true' triggers on demand Call Home messages. Setting the object to 'false' has no effect. When read, this object always returns 'false'.
ccmSmartCallHomeProfile
This object specifies the name of the profile for which the Smart Call Home messages should be generated. A zero length string for this object indicates that the Smart Call Home messages are generated only for Cisco-TAC profile.
ccmSmartCallHomeServiceType
The object specifies the type of service requested from Smart Call Home server. 'commandReference' indicates a request for command reference to Smart Call Home server. 'configSanity' indicates a request for config-sanity request to Smart Call Home server. ...
ccmSmartCallHomeAnalysisCmd
The object specifies an existing diplay/show command on the the system. The output of the command will be included in the Call Home message and be processed by Cisco backend OI (Output Interpreter) tool for further analysis. This object is applicable only ...
ccmSmartCallHomeCcoId
The object specifies registered CCO ID (Cisco Connection Online) ID to which the response to Smart Call Home requests should be directed. Response from Cisco will be directed to system contact address specified in the Smart Call Home request if value of t ...
ccmSmartCallHomeTrigger
Object to trigger Smart Call Home request messages. Setting the object to 'true' triggers Smart Call Home request message. The object can be set to the value of 'true' only if ccmOnDemandMsgServAvailable returns 'true'. Setting the object to 'false' has n ...
ccmCallHomeVrfName
The name of Virtual Routing and Forwarding (VRF) domain configured for Call Home feature. A zero length string indicates that there is no VRF domain configured and the default VRF domain is used by Call Home feature.
ccmMsgSourceIpAddrType
The type of Internet address to be used as the source address while generating Call Home messages. Changing the value of this object may change the value of ccmMsgSourceInterface.
ccmMsgSourceIpAddr
The Internet address to be used as the source address while generating Call Home messages. The type of this address is determined by the ccmMessageSourceIpAddrType object.
ccmMsgSourceInterface
The interface to be used while generating Call Home messages. A value of zero indicates that a source interface is not specified. Changing the value of this object may change the value of ccmMsgSourceIpAddrType and ccmMsgSourceIpAddr.
chSystemInformationGroup
A collection of objects for displaying and configuring system information pertaining to Call Home.
chConfigurationGroup
A collection of objects for displaying and configuring Call Home parameters.
chEmailMsgDispGroup
A collection of object(s) for displaying and configuring e-mail address to which the e-mail disposition notification should be sent.
chSingleSmtpServerGroup
A collection of objects for displaying and configuring Call Home SMTP server on the devices which support only one SMTP server.
chMultipleSmtpServersGroup
A collection of objects for displaying and configuring Call Home SMTP server on the devices which support on one SMTP server.
chStatisticsGroup
A collection of objects for displaying Call Home statistics.
ccmSysLogSeverityGroup
A collection of object(s) for displaying and configuring Call Home syslog severity based on which Call Home alerts may be issued.
ccmMIBNotificationsConfigGroup
A collection of objects for displaying and configuring Call Home notifications.
chConfigurationGroup1
A collection of objects for displaying and configuring Call Home parameters.
chConfigurationGroup2
A collection of objects for displaying and configuring Call Home parameters.
chSwInventoryInfoGroup
A collection of objects for displaying and configuring software inventory information.
chPeriodicSwInventoryInfoGroup
A collection of objects for configuring periodic software inventory information.
chSwInventoryInfoGroup1
A collection of objects for displaying software inventory information.
ccmUserDefCmdGroup
A collection of objects for configuring user defined commands for the Call Home alert group types.
ccmPeriodicSwInventoryInfoGroup1
A collection of objects for configuring the additional information of periodic software inventory information.
ccmConfigurationGroup3
A collection of objects for displaying and configuring Call Home parameters.
ccmAlertActionGroup
A collection of objects providing control and status information for Call Home alert actions.
ccmProfileMessageLevelGroup
A collection of objects providing control over message filtering level for Call Home messages.
ccmProfileActivationGroup
A collection of objects providing control over activating and deactivating configured Call Home profiles.
ccmProfileTestGroup
A collection of objects providing control over generation of test alert messages for a profile.
ccmProfileAlertGroupsGroup
A collection of objects that provide names to identify alert-groups supported by the system and ability to associate them with various profiles.
ccmProfileAlertGroupControlGroup
A collection of objects providing control over enabling and disabling various alert-groups supported by the system.
ccmThrottleConfigurationGroup
A collection of objects for controlling Call Home message throttling functionality.
ccmSmtpServersPriorityGroup
A collection of object(s) providing priority related information for Call Home SMTP servers.
ccmAlertGroupCapabilityGroup
A collection of object(s) providing information about criteria used by system to issue message for the corresponding alert group.
ccmHttpCfgGroup
A collection of object(s) for configuring HTTP transport related information for delivering Call Home messages.
ccmSeverityAlertGroupCfgGroup
A collection of objects providing information of severity based alert groups.
ccmPeriodicAlertGroupCfgGroup
A collection of objects providing information of periodic alert groups.
ccmPatternAlertGroupCfgGroup
A collection of objects providing information of pattern based alert groups.
ccmEventAlertGroupCfgGroup
A collection of objects providing information of event based alert groups.
ccmSmtpMsgSendFailNotifCtrlGroup
A collection of object(s) to control SMTP message send failure related notification(s).
ccmAlertHCStatisticsGroup
A collection of objects for displaying Call Home 64 bit alert statistics.
ccmAlertRateLimitGroup
A collection of object(s) providing information regarding the Call Home rate limit mechanism.
ccmSmtpServerStatusGroup
A collection of object(s) providing information regarding status availability of Call Home Smtp Servers.
ccmProfileHiMessageSizeGroup
A collection of objects providing information regarding to maximum size message to destination.
chSystemInformationGroup1
A collection of objects for displaying and configuring system information pertaining to Call Home.
chSystemServicePriorityGroup
A collection of objects for configuring configuring system service priority pertaining to Call Home.
ccmOnDemandMsgSendControlGroup
A collection of objects that enable sending on demand Call Home messages.
ccmOnDemandMsgStatusGroup
A collection of object(s) to indicate status of on demand message service on the device.
ccmSmartCallHomeGroup
A collection of objects that enable issuing Smart Call Home messages.
ccmEventStatsGroup
A collection of object(s) indicating statistical information for the Call Home events.
ccmCallhomeEventsGroup
A collection of notification objects required for Call Home events that occured in the system.
ccmCallHomeVrfGroup
A collection of object(s) to manage VRF information for Call Home feature.
ccmSmtpServersVrfGroup
A collection of object(s) to manage VRF information for SMTP Servers in Call Home feature.
ccmHttpProxyServerGroup
A collection of objects for displaying and configuring Call Home HTTP proxy server on the devices which support HTTP proxy server for CallHome feature
ccmHttpTransportVrfGroup
A collection of object(s) to manage VRF information for HTTP transport in Call Home feature.
ccmSingleSmtpServerGroup
A collection of objects for displaying and configuring Call Home SMTP server on the devices which support only one SMTP server.
ccmMessageSourceGroup
A collection of objects to manage Call Home message source address.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list