CISCO-CAR-MIB Download
This Cisco MIB provides the packet filtering information
implemented by the Committed Access Rate (CAR) feature of a
Cisco Layer 3 service.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-CAR-MIB
- ccarConfigTable
- A table of rate limit configuration entries. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets flowing into/out of an interface to regulate network traffic.
- ccarConfigEntry
- A collection of rate-limit configuration objects on this interface. Entries in the ccarConfigTable is created and deleted via the rate-limit command line interface.
- ccarConfigDirection
- The data source for the Rate Limit object.
- ccarConfigRowIndex
- An arbitrary index for rate limit objects. It will increase as the list is traversed, but may skip.
- ccarConfigType
- The type of traffic rate-limited against.
- ccarConfigAccIdx
- The index to the access list if RateLimitType is either quickAcc or standardAcc.
- ccarConfigRate
- The comitted access rate. This is the sustained rate permitted by the rate limit.
- ccarConfigLimit
- The rate limit. The amout of traffic, in bytes, in excess of the committed access rate which will be instantaneously permitted by the rate limit.
- ccarConfigExtLimit
- The extended burst limit. The amount of traffic, in bytes, in excess of the burst limit which may be conditionnally permitted by the rate limit. The probability that the traffic is not permitted increases as the received burst increases. P(not permitted) ...
- ccarConfigConformAction
- Action to be taken when the traffic is within the Rate Limit.
- ccarConfigExceedAction
- Action to be taken when the traffic exceeds the Rate Limit.
- ccarStatTable
- A table of rate limit status entries.
- ccarStatEntry
- A collection of rate-limit status objects on this interface. Entries are created and deleted via the rate-limit command line interface.
- ccarStatSwitchedPkts
- The counter of packets permitted by this rate limit.
- ccarStatSwitchedBytes
- The counter of bytes permitted by this interface.
- ccarStatFilteredPkts
- The counter of packets which exceeded this rate limit.
- ccarStatFilteredBytes
- The counter of bytes which exceeded this rate limit.
- ccarStatCurBurst
- The current received burst size.
- ccarStatSwitchedPktsOverflow
- The high-word of the counter of packets permitted by this rate limit. NOTE: The object ccarStatSwitchedPkts contains the lower 32 bits of the switched packet counts. If the number of switched packets is larger than what can be stored in a 32 bit value, t ...
- ccarStatSwitchedBytesOverflow
- The high-word of the counter of bytes permitted by this interface. NOTE: The object ccarStatSwitchedBytes contains the lower 32 bits of the switched byte counts. If the number of switched bytes is larger than what can be stored in a 32 bit value, then th ...
- ccarStatFilteredPktsOverflow
- The high-word of the counter of packets which exceeded this rate limit. NOTE: The object ccarStatFilteredPkts contains the lower 32 bits of the filtered packet counts. If the number of filtered packets is larger than what can be stored in a 32 bit value, ...
- ccarStatFilteredBytesOverflow
- The high-word of the counter of bytes which exceeded this rate limit. NOTE: The object ccarStatFilteredBytes contains the lower 32 bits of the filtered byte counts. If the number of filtered bytes is larger than what can be stored in a 32 bit value, then ...
- ccarStatHCSwitchedPkts
- The counter of packets permitted by this rate limit. NOTE: This is a 64 bit (High Capacity) version of the ccarStatSwitchedPkts counter for use with SNMP v2c or v3 Managers
- ccarStatHCSwitchedBytes
- The counter of bytes permitted by this interface. NOTE: This is a 64 bit (High Capacity) version of the ccarStatSwitchedBytes counter for use with SNMP v2c or v3 Managers
- ccarStatHCFilteredPkts
- The counter of packets which exceeded this rate limit. NOTE: This is a 64 bit (High Capacity) version of the ccarStatFilteredPkts counter for use with SNMP v2c or v3 Managers
- ccarStatHCFilteredBytes
- The counter of bytes which exceeded this rate limit. NOTE: This is a 64 bit (High Capacity) version of the ccarStatFilteredBytes counter for use with SNMP v2c or v3 Managers
- ciscoCarMIBGroup
- A collection of objects providing CAR monitoring.
- ciscoCarMIBHCGroup
- A collection of high capacity counters (64-bit) provided for CAR monitoring.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
