CISCO-CDP-MIB Download

cdpInterfaceTable

The (conceptual) table containing the status of CDP on the device's interfaces.

cdpInterfaceEntry

An entry (conceptual row) in the cdpInterfaceTable, containing the status of CDP on an interface.

cdpInterfaceIfIndex

The ifIndex value of the local interface. For 802.3 Repeaters on which the repeater ports do not have ifIndex values assigned, this value is a unique value for the port, and greater than any ifIndex value supported by the repeater; in this case, the speci ...

cdpInterfaceEnable

An indication of whether the Cisco Discovery Protocol is currently running on this interface. This variable has no effect when CDP is disabled (cdpGlobalRun = FALSE).

cdpInterfaceMessageInterval

The interval at which CDP messages are to be generated on this interface. The default value is 60 seconds.

cdpInterfaceGroup

This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this situation, it indicates the RFC1516 group number of the repeater port which corresponds to this interface.

cdpInterfacePort

This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this situation, it indicates the RFC1516 port number of the repeater port which corresponds to this interface.

cdpInterfaceName

The name of the local interface as advertised by CDP in the Port-ID TLV

cdpInterfaceExtTable

This table contains the additional CDP configuration on the device's interfaces.

cdpInterfaceExtEntry

An entry in the cdpInterfaceExtTable contains the values configured for Extented Trust TLV and COS (Class of Service) for Untrusted Ports TLV on an interface which supports the sending of these TLVs.

cdpInterfaceExtendedTrust

Indicates the value to be sent by Extended Trust TLV. If trusted(1) is configured, the value of Extended Trust TLV is one byte in length with its least significant bit equal to 1 to indicate extended trust. All other bits are 0. If noTrust(2) is configure ...

cdpInterfaceCosForUntrustedPort

Indicates the value to be sent by COS for Untrusted Ports TLV.

cdpCacheTable

The (conceptual) table containing the cached information obtained via receiving CDP messages.

cdpCacheEntry

An entry (conceptual row) in the cdpCacheTable, containing the information received via CDP on one interface from one device. Entries appear when a CDP advertisement is received from a neighbor device. Entries disappear when CDP is disabled on the inter ...

cdpCacheIfIndex

Normally, the ifIndex value of the local interface. For 802.3 Repeaters for which the repeater ports do not have ifIndex values assigned, this value is a unique value for the port, and greater than any ifIndex value supported by the repeater; the specific ...

cdpCacheDeviceIndex

A unique value for each device from which CDP messages are being received.

cdpCacheAddressType

An indication of the type of address contained in the corresponding instance of cdpCacheAddress.

cdpCacheAddress

The (first) network-layer address of the device as reported in the Address TLV of the most recently received CDP message. For example, if the corresponding instance of cacheAddressType had the value 'ip(1)', then this object would be an IPv4-address. If ...

cdpCacheVersion

The Version string as reported in the most recent CDP message. The zero-length string indicates no Version field (TLV) was reported in the most recent CDP message.

cdpCacheDeviceId

The Device-ID string as reported in the most recent CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent CDP message.

cdpCacheDevicePort

The Port-ID string as reported in the most recent CDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0'). The zero-length string indicates no Port-ID field (TLV) was reported in the most recent CDP message.

cdpCachePlatform

The Device's Hardware Platform as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent CDP message.

cdpCacheCapabilities

The Device's Functional Capabilities as reported in the most recent CDP message. For latest set of specific values, see the latest version of the CDP specification. The zero-length string indicates no Capabilities field (TLV) was reported in the most rec ...

cdpCacheVTPMgmtDomain

The VTP Management Domain for the remote device's interface, as reported in the most recently received CDP message. This object is not instantiated if no VTP Management Domain field (TLV) was reported in the most recently received CDP message.

cdpCacheNativeVLAN

The remote device's interface's native VLAN, as reported in the most recent CDP message. The value 0 indicates no native VLAN field (TLV) was reported in the most recent CDP message.

cdpCacheDuplex

The remote device's interface's duplex mode, as reported in the most recent CDP message. The value unknown(1) indicates no duplex mode field (TLV) was reported in the most recent CDP message.

cdpCacheApplianceID

The remote device's Appliance ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message.

cdpCacheVlanID

The remote device's VoIP VLAN ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message.

cdpCachePowerConsumption

The amount of power consumed by remote device, as reported in the most recent CDP message. This object is not instantiated if no Power Consumption field (TLV) was reported in the most recently received CDP message.

cdpCacheMTU

Indicates the size of the largest datagram that can be sent/received by remote device, as reported in the most recent CDP message. This object is not instantiated if no MTU field (TLV) was reported in the most recently received CDP message.

cdpCacheSysName

Indicates the value of the remote device's sysName MIB object. By convention, it is the device's fully qualified domain name. This object is not instantiated if no sysName field (TLV) was reported in the most recently received CDP message.

cdpCacheSysObjectID

Indicates the value of the remote device's sysObjectID MIB object. This object is not instantiated if no sysObjectID field (TLV) was reported in the most recently received CDP message.

cdpCachePrimaryMgmtAddrType

An indication of the type of address contained in the corresponding instance of cdpCachePrimaryMgmtAddress.

cdpCachePrimaryMgmtAddr

This object indicates the (first) network layer address at which the device will accept SNMP messages as reported in the first address in the Management-Address TLV of the most recently received CDP message. If the corresponding instance of cdpCachePrima ...

cdpCacheSecondaryMgmtAddrType

An indication of the type of address contained in the corresponding instance of cdpCacheSecondaryMgmtAddress.

cdpCacheSecondaryMgmtAddr

This object indicates the alternate network layer address at which the device will accept SNMP messages as reported in the second address in the Management-Address TLV of the most recently received CDP message. If the corresponding instance of cdpCacheSe ...

cdpCachePhysLocation

Indicates the physical location, as reported by the most recent CDP message, of a connector which is on, or physically connected to, the remote device's interface over which the CDP packet is sent. This object is not instantiated if no Physical Location f ...

cdpCacheLastChange

Indicates the time when this cache entry was last changed. This object is initialised to the current time when the entry gets created and updated to the current time whenever the value of any (other) object instance in the corresponding row is modified.

cdpCtAddressTable

The (conceptual) table containing the list of network-layer addresses of a neighbor interface, as reported in the Address TLV of the most recently received CDP message. The first address included in the Address TLV is saved in cdpCacheAddress. This table ...

cdpCtAddressEntry

An entry (conceptual row) in the cdpCtAddressTable, containing the information on one address received via CDP on one interface from one device. Entries appear when a CDP advertisement is received from a neighbor device, with an Address TLV. Entries dis ...

cdpCtAddressIndex

The index of the address entry for a given cdpCacheIfIndex,cdpCacheDeviceIndex pair. It has the value N-1 for the N-th address in the Address TLV

cdpCtAddressType

An indication of the type of address contained in the corresponding instance of cdpCtAddress.

cdpCtAddress

The N-th network-layer address of the device as reported in the most recent CDP message's Address TLV, where N-1 is given by the value of cdpCtAddressIndex. For example, if the the corresponding instance of cdpCtAddressType had the value 'ip(1)', then thi ...

cdpGlobalRun

An indication of whether the Cisco Discovery Protocol is currently running. Entries in cdpCacheTable are deleted when CDP is disabled.

cdpGlobalMessageInterval

The interval at which CDP messages are to be generated. The default value is 60 seconds.

cdpGlobalHoldTime

The time for the receiving device holds CDP message. The default value is 180 seconds.

cdpGlobalDeviceId

The device ID advertised by this device. The format of this device id is characterized by the value of cdpGlobalDeviceIdFormat object.

cdpGlobalLastChange

Indicates the time when the cache table was last changed. It is the most recent time at which any row was last created, modified or deleted.

cdpGlobalDeviceIdFormatCpb

Indicate the Device-Id format capability of the device. serialNumber(0) indicates that the device supports using serial number as the format for its DeviceId. macAddress(1) indicates that the device supports using layer 2 MAC address as the format for its ...

cdpGlobalDeviceIdFormat

An indication of the format of Device-Id contained in the corresponding instance of cdpGlobalDeviceId. User can only specify the formats that the device is capable of as denoted in cdpGlobalDeviceIdFormatCpb object. serialNumber(1) indicates that the valu ...

ciscoCdpMIBGroup

A collection of objects for use with the Cisco Discovery Protocol.

ciscoCdpMIBGroupV11R01

A collection of objects for use with the Cisco Discovery Protocol.

ciscoCdpMIBGroupV11R02

A collection of objects for use with the Cisco Discovery Protocol.

ciscoCdpMIBGroupV12R02

A collection of objects for use with the Cisco Discovery Protocol.

ciscoCdpV2MIBGroup

A collection of objects for use with the Cisco Discovery Protocol version 2.

ciscoCdpV2IfExtGroup

A collection of objects for use with the Cisco Discovery Protocol version 2 to configure the value for Extended Trust TLV and COS for Untrusted Port TLV.

ciscoCdpCtAddressGroup

A collection of objects for use with the Cisco Discovery Protocol to obtain the addresses from the Address TLV of a received CDP packet.

ciscoCdpMIBGroupV12R03

A collection of objects for use with the Cisco Discovery Protocol.