CISCO-CONFIG-MAN-MIB Download
Configuration management MIB.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-CONFIG-MAN-MIB
- ccmHistoryRunningLastChanged
- The value of sysUpTime when the running configuration was last changed. If the value of ccmHistoryRunningLastChanged is greater than ccmHistoryRunningLastSaved, the configuration has been changed but not saved.
- ccmHistoryRunningLastSaved
- The value of sysUpTime when the running configuration was last saved (written). If the value of ccmHistoryRunningLastChanged is greater than ccmHistoryRunningLastSaved, the configuration has been changed but not saved. What constitutes a safe saving of th ...
- ccmHistoryStartupLastChanged
- The value of sysUpTime when the startup configuration was last written to. In general this is the default configuration used when cold starting the system. It may have been changed by a save of the running configuration or by a copy from elsewhere.
- ccmHistoryMaxEventEntries
- The maximum number of entries that can be held in ccmHistoryEventTable. The recommended value for implementations is 10.
- ccmHistoryEventEntriesBumped
- The number of times the oldest entry in ccmHistoryEventTable was deleted to make room for a new entry.
- ccmHistoryEventTable
- A table of configuration events on this router.
- ccmHistoryEventEntry
- Information about a configuration event on this router.
- ccmHistoryEventIndex
- A monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries.
- ccmHistoryEventTime
- The value of sysUpTime when the event occurred.
- ccmHistoryEventCommandSource
- The source of the command that instigated the event.
- ccmHistoryEventConfigSource
- The configuration data source for the event.
- ccmHistoryEventConfigDestination
- The configuration data destination for the event.
- ccmHistoryEventTerminalType
- If ccmHistoryEventCommandSource is 'commandLine', the terminal type, otherwise 'notApplicable'.
- ccmHistoryEventTerminalNumber
- If ccmHistoryEventCommandSource is 'commandLine', the terminal number. The value is -1 if not available or not applicable.
- ccmHistoryEventTerminalUser
- If ccmHistoryEventCommandSource is 'commandLine', the name of the logged in user. The length is zero if not available or not applicable.
- ccmHistoryEventTerminalLocation
- If ccmHistoryEventCommandSource is 'commandLine', the hard-wired location of the terminal or the remote host for an incoming connection. The length is zero if not available or not applicable.
- ccmHistoryEventCommandSourceAddress
- If ccmHistoryEventTerminalType is 'virtual', the internet address of the connected system. If ccmHistoryEventCommandSource is 'snmp', the internet address of the requester. The value is 0.0.0.0 if not available or not applicable. This object is deprecated ...
- ccmHistoryEventVirtualHostName
- If ccmHistoryEventTerminalType is 'virtual', the host name of the connected system. The length is zero if not available or not applicable.
- ccmHistoryEventServerAddress
- If ccmHistoryEventConfigSource or ccmHistoryEventConfigDestination is 'networkTftp' or 'networkRcp', the internet address of the storage file server. The value is 0.0.0.0 if not applicable or not available. This object is deprecated by ccmHistoryEventSer ...
- ccmHistoryEventFile
- If ccmHistoryEventConfigSource or ccmHistoryEventConfigDestination is 'networkTftp' or 'networkRcp', the configuration file name at the storage file server. The length is zero if not available or not applicable.
- ccmHistoryEventRcpUser
- If ccmHistoryEventConfigSource or ccmHistoryEventConfigDestination is 'networkRcp', the remote user name. The length is zero if not applicable or not available.
- ccmHistoryCLICmdEntriesBumped
- The number of times the oldest entry in ccmCLIHistoryCommandTable with first index as ccmHistoryEventIndex was deleted to make room for a new entry. This object is applicable only if ccmHistoryEventCommandSource has a value of 'commandLine'.
- ccmHistoryEventCommandSourceAddrType
- This object indicates the transport type of the address contained in ccmHistoryEventCommandSourceAddrRev1. The value will be zero if not available or not applicable.
- ccmHistoryEventCommandSourceAddrRev1
- If ccmHistoryEventTerminalType is 'virtual', the internet address of the connected system. If ccmHistoryEventCommandSource is 'snmp', the internet address of the requester. The value of all bit's is zero if not available or not applicable. The Format of ...
- ccmHistoryEventServerAddrType
- This object indicates the transport type of the address contained in ccmHistoryEventServerAddrRev1. The value will be zero if not available or not aplicable.
- ccmHistoryEventServerAddrRev1
- If ccmHistoryEventConfigSource or ccmHistoryEventConfigDestination is 'networkTftp' or 'networkRcp', the internet address of the storage file server. The value of all bits is 0s if not applicable or not available. The Format of this address depends on the ...
- ccmCLIHistoryMaxCmdEntries
- The maximum number of entries that can be held in ccmCLIHistoryCommandTable. The recommended value for implementations is 100. If the number of entries in ccmCLIHistoryCommandTable exceeds the value of this object, old entries will be bumped to make room ...
- ccmCLIHistoryCmdEntries
- The current number of entries in ccmCLIHistoryCommandTable.
- ccmCLIHistoryCmdEntriesAllowed
- This object indicates the upper limit on the number of entries allowed in ccmCLIHistoryCommandTable by the managed system.
- ccmCLIHistoryCommandTable
- A table of CLI commands that took effect during configuration events.
- ccmCLIHistoryCommandEntry
- Information about the CLI commands that took effect during the configuration event pointed by ccmCLIHistoryEventIndex. A set of rows in this table having the first index as ccmHistoryEventIndex will store the CLI commands entered during the corresponding ...
- ccmCLIHistoryCommandIndex
- A monotonically increasing integer for the purpose of indexing CLI commands which took effect during a configuration event.
- ccmCLIHistoryCommand
- The CLI command entered which took effect during the configuration event pointed by ccmHistoryEventIndex.
- ccmCLICfgRunConfNotifEnable
- This variable indicates whether the system produces the ccmCLIRunningConfigChanged notification. A false value will prevent notifications from being generated by this system.
- ccmCTID
- This object indicates the Config Change Tracking ID which uniquely represents version-incrementing changes to the IOS running configuration.
- ccmCTIDLastChangeTime
- This object indicates the time when the Config Change Tracking ID last changed.
- ccmCTIDWhoChanged
- This object indicates the user who last reset the Config Change Tracking ID.
- ccmCTIDRolledOverNotifEnable
- This variable indicates whether the system produces the ccmCTIDRolledOver notification. A false value will prevent notifications from being generated by this system.
- ciscoConfigManHistoryGroup
- Configuration history.
- ciscoConfigManHistoryGroupRev1
- Configuration history.
- ciscoConfigManHistoryGroupRev2
- Configuration history. This group deprecates the old group ciscoConfigManHistoryGroupRev1
- ciscoConfigManCLIHistCmdGroup
- CLI commands entered during a configuration history event.
- ciscoConfigManCTIDObjectGroup
- Information about the current CTID value, when CTID last changed, and who last changed the CTID.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
