CISCO-DIAMETER-BASE-PROTOCOL-MIB Download

ciscoDiaBaseProtEnableProtocolErrorNotif

Setting the value of this object to true(1) enables the ciscoDiaBaseProtProtocolErrorNotif notification.

ciscoDiaBaseProtEnableTransientFailureNotif

Setting the value of this object to true(1) enables the ciscoDiaBaseProtTransientFailureNotif notification.

ciscoDiaBaseProtEnablePermanentFailureNotif

Setting the value of this object to true(1) enables the ciscoDiaBaseProtPermanentFailureNotif notification.

ciscoDiaBaseProtEnablePeerConnectionDownNotif

Setting the value of this object to true(1) enables the ciscoDiaBaseProtPeerConnectionDownNotif notification.

ciscoDiaBaseProtEnablePeerConnectionUpNotif

Setting the value of this object to true(1) enables the ciscoDiaBaseProtPeerConnectionUpNotif notification.

cdbpLocalId

The implementation identification string for the Diameter software in use on the system, for example; 'diameterd'

cdbpLocalIpAddrTable

The table listing the Diameter local host's IP Addresses.

cdbpLocalIpAddrEntry

A row entry representing a Diameter local host IP Address.

cdbpLocalIpAddrIndex

A number uniquely identifying the number of IP Addresses supported by this Diameter host.

cdbpLocalIpAddrType

The type of internet address stored in cdbpLocalIpAddress.

cdbpLocalIpAddress

The IP-Address of the host, which is of the type specified in cdbpLocalIpAddrType.

cdbpLocalTcpListenPort

This object represents Diameter TCP 'listen' port.

cdbpLocalSctpListenPort

This object represents Diameter SCTP 'listen' port.

cdbpLocalOriginHost

This object represents the Local Origin Host.

cdbpLocalRealm

This object represents the Local Realm Name.

cdbpRedundancyEnabled

This parameter indicates if cisco redundancy has been enabled, it is enabled if set to true and disabled if set to false.

cdbpRedundancyInfraState

This parameter indicates the current state of cisco redundancy infrastructure state. rfUnknown(0) - unknown state rfDisabled(1) - RF is not functioning at this time rfInitialization(2) - co-ordinating init with platform rfNegotiation ...

cdbpRedundancyLastSwitchover

This object represents the Last Switchover Time.

cdbpLocalApplTable

The table listing the Diameter applications supported by this server.

cdbpLocalApplEntry

A row entry representing a Diameter application on this server.

cdbpLocalApplIndex

A number uniquely identifying a supported Diameter application. Upon reload, cdbpLocalApplIndex values may be changed.

cdbpLocalApplStorageType

The storage type for this conceptual row. None of the columnar objects is writable when the conceptual row is permanent.

cdbpLocalApplRowStatus

The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...

cdbpLocalVendorTable

The table listing the vendor IDs supported by local Diameter.

cdbpLocalVendorEntry

A row entry representing a vendor ID supported by local Diameter.

cdbpLocalVendorIndex

A number uniquely identifying the vendor ID supported by local Diameter. Upon reload, cdbpLocalVendorIndex values may be changed.

cdbpLocalVendorId

The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) - Diameter vendor id cisco diameterVendor3gpp(10415) - Diameter vendor id 3gpp diameterVendorVodafone(12645) - Diamet ...

cdbpLocalVendorStorageType

The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.

cdbpLocalVendorRowStatus

The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...

cdbpAppAdvToPeerTable

The table listing the applications advertised by this host to each peer and the types of service supported: accounting, authentication or both.

cdbpAppAdvToPeerEntry

A row entry representing a discovered or configured Diameter peer server.

cdbpAppAdvToPeerVendorId

The IANA Enterprise Code value assigned to the vendor of the Diameter device.

cdbpAppAdvToPeerIndex

A number uniquely identifying the Diameter applications advertised as supported by this host to each peer. Upon reload, cdbpAppAdvToPeerIndex values may be changed.

cdbpAppAdvToPeerServices

The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.

cdbpAppAdvToPeerStorageType

The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.

cdbpAppAdvToPeerRowStatus

The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...

cdbpLocalStatsTotalPacketsIn

The total number of packets received by Diameter Base Protocol.

cdbpLocalStatsTotalPacketsOut

The total number of packets transmitted by Diameter Base Protocol.

cdbpLocalStatsTotalUpTime

This object represents the total time the Diameter server has been up until now.

cdbpLocalResetTime

If the server keeps persistent state (e.g., a process) and supports a 'reset' operation (e.g., can be told to re-read configuration files), this value will be the time elapsed (in hundredths of a second) since the server was 'reset'. For software that do ...

cdbpLocalConfigReset

Status/action object to reinitialize any persistent server state. When set to reset(2), any persistent server state (such as a process) is reinitialized as if the server had just been started. This value will never be returned by a read operation. When ...

cdbpPeerTable

The table listing information regarding the discovered or configured Diameter peer servers.

cdbpPeerEntry

A row entry representing a discovered or configured Diameter peer server.

cdbpPeerIndex

A number uniquely identifying each Diameter peer with which the host server communicates. Upon reload, cdbpPeerIndex values may be changed.

cdbpPeerId

The server identifier for the Diameter peer. It must be unique and non-empty.

cdbpPeerPortConnect

The connection port this server used to connect to the Diameter peer. If there is no active connection, this value will be zero(0).

cdbpPeerPortListen

The port the server is listening on.

cdbpPeerProtocol

The transport protocol (tcp/sctp) the Diameter peer is using. tcp(1) - Transmission Control Protocol sctp(2) - Stream Control Transmission Protocol.

cdbpPeerSecurity

The security the Diameter peer is using. other(1) - Unknown Security Protocol. tls(2) - Transport Layer Security Protocol. ipsec(3) - Internet Protocol Security.

cdbpPeerFirmwareRevision

Firmware revision of peer. If no firmware revision, the revision of the Diameter software module may be reported instead.

cdbpPeerStorageType

The storage type for this conceptual row. Only cdbpPeerPortListen object is writable when the conceptual row is permanent.

cdbpPeerRowStatus

The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...

cdbpPeerIpAddrTable

The table listing the Diameter server IP Addresses.

cdbpPeerIpAddrEntry

A row entry representing peer Diameter server IP Addresses.

cdbpPeerIpAddressIndex

A number uniquely identifying the number of IP Addresses supported by all Diameter peers.

cdbpPeerIpAddressType

The type of address stored in diameterPeerIpAddress.

cdbpPeerIpAddress

The active IP Address(es) used for connections.

cdbpAppAdvFromPeerTable

The table listing the applications advertised by each peer to this host and the types of service supported: accounting, authentication or both.

cdbpAppAdvFromPeerEntry

A row entry representing a discovered or configured Diameter peer server.

cdbpAppAdvFromPeerVendorId

The IANA Enterprise Code value assigned to the vendor of the Diameter device.

cdbpAppAdvFromPeerIndex

A number uniquely identifying the applications advertised as supported from each Diameter peer.

cdbpAppAdvFromPeerType

The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.

cdbpPeerVendorTable

The table listing the Vendor IDs supported by the peer.

cdbpPeerVendorEntry

A row entry representing a Vendor ID supported by the peer.

cdbpPeerVendorIndex

A number uniquely identifying the Vendor ID supported by the peer. Upon reload, cdbpPeerVendorIndex values may be changed.

cdbpPeerVendorId

The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) - Diameter vendor id cisco diameterVendor3gpp(10415) - Diameter vendor id 3gpp diameterVendorVodafone(12645) - Diamet ...

cdbpPeerVendorStorageType

The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.

cdbpPeerVendorRowStatus

The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instan ...

cdbpPeerStatsTable

The table listing the Diameter peer statistics.

cdbpPeerStatsEntry

A row entry representing a Diameter peer.

cdbpPeerStatsState

Connection state in the Peer State Machine of the peer with which this Diameter server is communicating. closed(1) - Connection closed with this peer. waitConnAck(2) - Waiting for an acknowledgment from this peer. waitICEA(3) - Waiting for a Capab ...

cdbpPeerStatsStateDuration

This object represents the Peer state duration.

cdbpPeerStatsLastDiscCause

The last cause for a peers disconnection. rebooting(1) - A scheduled reboot is imminent. busy(2) - The peer's internal resources are constrained, and it has determined that the transport connection needs to be shutdown. doNotWantToTalk(3) ...

cdbpPeerStatsWhoInitDisconnect

Did the host or peer initiate the disconnect? host(1) - If this server initiated the disconnect. peer(2) - If the peer with which this server was connected initiated the disconnect.

cdbpPeerStatsDWCurrentStatus

This object indicates the connection status. okay(1) - Indicates the connection is presumed working. suspect(2) - Indicates the connection is possibly congested or down. down(3) - The peer is no longer reachable, causing the transport connection to ...

cdbpPeerStatsTimeoutConnAtmpts

If there is no transport connection with a peer, this is the number of times the server attempts to connect to that peer. This is reset on disconnection.

cdbpPeerStatsASRsIn

Abort-Session-Request messages received from the peer.

cdbpPeerStatsASRsOut

Abort-Session-Request messages sent to the peer.

cdbpPeerStatsASAsIn

Number of Abort-Session-Answer messages received from the peer.

cdbpPeerStatsASAsOut

Number of Abort-Session-Answer messages sent to the peer.

cdbpPeerStatsACRsIn

Number of Accounting-Request messages received from the peer.

cdbpPeerStatsACRsOut

Number of Accounting-Request messages sent to the peer.

cdbpPeerStatsACAsIn

Number of Accounting-Answer messages received from the peer.

cdbpPeerStatsACAsOut

Number of Accounting-Answer messages sent to the peer.

cdbpPeerStatsCERsIn

Number of Capabilities-Exchange-Request messages received from the peer.

cdbpPeerStatsCERsOut

Number of Capabilities-Exchange-Request messages sent to the peer.

cdbpPeerStatsCEAsIn

Number of Capabilities-Exchange-Answer messages received from the peer.

cdbpPeerStatsCEAsOut

Number of Capabilities-Exchange-Answer messages sent to the peer.

cdbpPeerStatsDWRsIn

Number of Device-Watchdog-Request messages received from the peer.

cdbpPeerStatsDWRsOut

Number of Device-Watchdog-Request messages sent to the peer.

cdbpPeerStatsDWAsIn

Number of Device-Watchdog-Answer messages received from the peer.

cdbpPeerStatsDWAsOut

Number of Device-Watchdog-Answer messages sent to the peer.

cdbpPeerStatsDPRsIn

Number of Disconnect-Peer-Request messages received.

cdbpPeerStatsDPRsOut

Number of Disconnect-Peer-Request messages sent.

cdbpPeerStatsDPAsIn

Number of Disconnect-Peer-Answer messages received.

cdbpPeerStatsDPAsOut

Number of Disconnect-Peer-Answer messages sent.

cdbpPeerStatsRARsIn

Number of Re-Auth-Request messages received.

cdbpPeerStatsRARsOut

Number of Re-Auth-Request messages sent.

cdbpPeerStatsRAAsIn

Number of Re-Auth-Answer messages received.

cdbpPeerStatsRAAsOut

Number of Re-Auth-Answer messages sent.

cdbpPeerStatsSTRsIn

Number of Session-Termination-Request messages received from the peer.

cdbpPeerStatsSTRsOut

Number of Session-Termination-Request messages sent to the peer.

cdbpPeerStatsSTAsIn

Number of Session-Termination-Answer messages received from the peer.

cdbpPeerStatsSTAsOut

Number of Session-Termination-Answer messages sent to the peer.

cdbpPeerStatsDWReqTimer

Device-Watchdog Request Timer, which is the interval between packets sent to peers.

cdbpPeerStatsRedirectEvents

Redirect Event count, which is the number of redirects sent from a peer.

cdbpPeerStatsAccDupRequests

The number of duplicate Diameter Accounting-Request packets received.

cdbpPeerStatsMalformedReqsts

The number of malformed Diameter packets received.

cdbpPeerStatsAccsNotRecorded

The number of Diameter Accounting-Request packets which were received and responded to but not recorded.

cdbpPeerStatsAccRetrans

The number of Diameter Accounting-Request packets retransmitted to this Diameter server.

cdbpPeerStatsTotalRetrans

The number of Diameter packets retransmitted to this Diameter server, not to include Diameter Accounting-Request packets retransmitted.

cdbpPeerStatsAccPendReqstsOut

The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response ...

cdbpPeerStatsAccReqstsDropped

The number of Accounting-Requests to this server that have been dropped.

cdbpPeerStatsHByHDropMessages

An answer message that is received with an unknown hop-by-hop identifier. Does not include accounting requests dropped.

cdbpPeerStatsEToEDupMessages

Duplicate answer messages that are to be locally consumed. Does not include duplicate accounting requests received.

cdbpPeerStatsUnknownTypes

The number of Diameter packets of unknown type which were received.

cdbpPeerStatsProtocolErrors

This object represents the Number of protocol errors returned to peer, but not including redirects.

cdbpPeerStatsTransientFailures

This object represents the transient failure count.

cdbpPeerStatsPermanentFailures

This object represents the Number of permanent failures returned to peer.

cdbpPeerStatsTransportDown

This object represents the Number of unexpected transport failures.

cdbpRealmKnownPeersTable

The table listing the Diameter realms and known peers.

cdbpRealmKnownPeersEntry

A row entry representing a Diameter realm and known peers.

cdbpRealmKnownPeersIndex

A number uniquely identifying a peer known to this realm. Upon reload, cdbpRealmKnownPeersIndex values may be changed.

cdbpRealmKnownPeers

The index of the peer this realm knows about. This is an ordered list, where the ordering signifies the order in which the peers are tried. Same as the cdbpPeerIndex

cdbpRealmKnownPeersChosen

How the realm chooses which peer to send packets to. roundRobin(1) - The peer used for each transaction is selected based on the order in which peers are configured. loadBalance(2) - The peer used for each transaction is based on the load metric ...

cdbpRealmMessageRouteTable

The table listing the Diameter realm-based message route information.

cdbpRealmMessageRouteEntry

A row entry representing a Diameter realm based message route server.

cdbpRealmMessageRouteIndex

A number uniquely identifying each realm.

cdbpRealmMessageRouteRealm

This object represents the realm name

cdbpRealmMessageRouteApp

Application id used to route packets to this realm.

cdbpRealmMessageRouteType

The types of service supported for each realm application: accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.

cdbpRealmMessageRouteAction

The action is used to identify how a message should be treated based on the realm, application and type. local(1) - Diameter messages that resolve to a route entry with the Local Action set to Local can be satisfied locally, and do not need to be route ...

cdbpRealmMessageRouteACRsIn

Number of Accounting-Request messages received from the realm.

cdbpRealmMessageRouteACRsOut

Number of Accounting-Request messages sent to the realm.

cdbpRealmMessageRouteACAsIn

Number of Accounting-Answer messages received from the realm.

cdbpRealmMessageRouteACAsOut

Number of Accounting-Answer messages sent to the realm.

cdbpRealmMessageRouteRARsIn

Number of Re-Auth-Request messages received from the realm.

cdbpRealmMessageRouteRARsOut

Number of Re-Auth-Request messages sent to the realm.

cdbpRealmMessageRouteRAAsIn

Number of Re-Auth-Answer messages received from the realm.

cdbpRealmMessageRouteRAAsOut

Number of Re-Auth-Answer messages sent to the realm.

cdbpRealmMessageRouteSTRsIn

Number of Session-Termination-Request messages received from the realm.

cdbpRealmMessageRouteSTRsOut

Number of Session-Termination-Request messages sent to the realm.

cdbpRealmMessageRouteSTAsIn

Number of Session-Termination-Answer messages received from the realm.

cdbpRealmMessageRouteSTAsOut

Number of Session-Termination-Answer messages sent to the realm.

cdbpRealmMessageRouteASRsIn

Number of Abort-Session-Request messages received from the realm.

cdbpRealmMessageRouteASRsOut

Number of Abort-Session-Request messages sent to the realm.

cdbpRealmMessageRouteASAsIn

Number of Abort-Session-Answer messages received from the realm.

cdbpRealmMessageRouteASAsOut

Number of Abort-Session-Answer messages sent to the realm.

cdbpRealmMessageRouteAccRetrans

The number of Diameter accounting packets retransmitted to this realm.

cdbpRealmMessageRouteAccDupReqsts

The number of duplicate Diameter accounting packets sent to this realm.

cdbpRealmMessageRoutePendReqstsOut

The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response ...

cdbpRealmMessageRouteReqstsDrop

The number of requests dropped by this realm.

ciscoDiameterBasePMIBLocalCfgGroup

A collection of objects providing configuration common to the server.

ciscoDiameterBasePMIBPeerCfgGroup

A collection of objects providing configuration of the Diameter peers.

ciscoDiameterBasePMIBPeerStatsGroup

A collection of objects providing statistics of the Diameter peers.

ciscoDiameterBasePMIBTrapCfgGroup

A collection of objects providing configuration for base protocol notifications.

ciscoDiameterBasePMIBLocalCfgSkippedGroup

A collection of objects providing configuration common to the server.

ciscoDiameterBasePMIBLocalStatsSkippedGroup

A collection of objects providing statistics common to the server.

ciscoDiameterBasePMIBPeerCfgSkippedGroup

A collection of objects providing configuration for Diameter peers.

ciscoDiameterBasePMIBPeerStatsSkippedGroup

A collection of objects providing statistics of Diameter peers.

ciscoDiameterBasePMIBRealmCfgSkippedGroup

A collection of objects providing configuration for realm message routing.

ciscoDiameterBasePMIBRealmStatsSkippedGroup

A collection of objects providing statistics of realm message routing.