CISCO-DLCSW-MIB

CISCO-DLCSW-MIB Download

MIBs list

The Cisco MIB for managing FRAS sessions to the endstation. These objects are specific to downstream or enduser sessions only. The support for this MIB is read-only.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-DLCSW-MIB

frasBnnSdlcConTable
This table contains mapping information for each SDLC Link Station in a FRAS-BNN to SDLC connection. All entries are derived entirely from the router configuration.
frasBnnSdlcConEntry
This table contains the entries defined for a specific SDLC Link Station in a BNN-SDLC configuration.
bnnSdlcConAddress
This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.
bnnSdlcConState
Contains the FRAS state of the Link Station. reset - no activity testSent - TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent ...
bnnSdlcConDlci
The Data Link Connection Identifier used for this particular connection.
bnnSdlcConFRInterface
This is the Frame-Relay interface which the SDLC Link Station is using to connect to the Host.
bnnSdlcConLocalSap
The Local SAP for this SDLC station's corresponding LLC session to the host.
bnnSdlcConRemoteSap
The Remote SAP for this SDLC station's corresponding LLC session to the host.
frasBnnLlcConTable
This table contains information for each End Station in a FRAS-BNN to LLC connection. The entries are derived entirely from the router configuration.
frasBnnLlcConEntry
This table contains information for a specific End Station's connection state in a BNN-LLC connection.
bnnLlcConDeviceMacAddress
This value is the End Station's Local Mac-Address.
bnnLlcConLanLocalSap
The End Station's Local SAP.
bnnLlcConLanRemoteSap
The End Station's Remote SAP.
bnnLlcConLanInterface
This is the physical interace which the End Station is attached to.
bnnLlcConDlci
The Data Link Connection Identifier associated with the corresponding LLC2 session over Frame-Relay to the host.
bnnLlcConState
Contains the FRAS state of the Link Station. reset - no activity testSent - TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent ...
bnnLlcConLocalMacAddress
The Mac-Address configured as the End Station's target or Remote address.
bnnLlcConFrLocalSap
The FRAS router's Local SAP.
bnnLlcConFrRemoteSap
The FRAS router's Remote SAP.
frasBanSdlcConTable
This table contains information for each SDLC Link Station in a FRAS-BAN to SDLC connection. The entries are derived entirely from the router configuration.
frasBanSdlcConEntry
This table contains information for a specific SDLC Link Station in a configured for a BAN connection.
banSdlcConLocalInterface
This is the physical interface the SDLC Link Stations are connected to.
banSdlcConAddress
This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.
banSdlcConBanDlciMac
The End Station's target or Remote mac-address.
banSdlcConDlci
The Data Link Connection Identifier for the corresponding LLC2 session over Frame-Relay to the host.
banSdlcConState
Contains the FRAS state of the Link Station. reset - no activity testSent- TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent ...
banSdlcConVmac
The End Station's virtual Mac-Address which is comprised of a TR formatted template and the SDLC Link Station address appended on the last nibble.
banSdlcConBniAddress
BNI is Boundary Node Identifier which is the FRAS-BAN connection's Remote address in TR-format. It is by default 4fff.0000.0000
banSdlcConFrLocalSap
The FRAS router's Local SAP.
banSdlcConFrRemoteSap
The FRAS router's Remote SAP.
frasBanLlcConTable
This table contains information for each LAN attached End Station in a FRAS-BAN to LAN connection. The entries are from endstations which have their destination mac-addresses as the BAN-DLCI-MAC address.
frasBanLlcConEntry
This table contains information for a specific LAN attached End Station.
banLlcEndstnLocalMac
This value is the End Station's Local Mac-Address.
banLlcBanDlciMac
This value is the End Station's Remote Mac-Address. It is also the FRAS-BAN connection's Local Mac-Address.
banLlcConLocalSap
The endstation's Local SAP.
banLlcConRemoteSap
The endstation's Remote SAP.
banLlcConDlci
The Data Link Connection Identifier associated with the corresponding LLC2 session over Frame-Relay to the host.
banLlcConState
Contains the FRAS state of the Link Station. reset - no activity testSent- TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent ...
banLlcConFrInterface
This is the Frame-Relay interface for this particular session.
banLlcBniAddress
This value is the FRAS-BAN connection's Target Mac-Address. It is by default 4fff.0000.0000
banLlcConFrLocalSap
The Local SAP of the corresponding LLC2 session over Frame-Relay to the host.
banLlcConFrRemoteSap
The Remote SAP of the corresponding LLC2 session over Frame-Relay to the host.
frasBnnSdlcGroup
The frasBnnSdlcGroup defines objects which are common to the BNN SDLC of all compliant connections.
frasBnnLlcGroup
The frasBnnLlcGroup defines objects which are common to the BNN LLC of all compliant connections.
frasBanSdlcGroup
The frasBanSdlcGroup defines objects which are common to the BAN SDLC of all compliant connections.
frasBanLlcGroup
The frasBanLlcGroup defines objects which are common to the BAN LLC of all compliant connections.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list