CISCO-DOT11-RADIO-DIAGNOSTIC-MIB Download
This MIB is intended to be implemented on all
802.11 based Access Points and Wireless Bridges
that need to participate in radio environment
diagnosis. The devices mentioned above may house
any one of the 802.11a/802.11b/802.11g standard-
based radio interfaces in them for data
communication in the form of radio waves. The
administrator, through the NMS, temporarily alters
the power and channel configurations of an 802.11
radio interface and the transmits power levels of
the associated clients, if any, by setting
appropriate values to the objects of this MIB to
perform activities like discovering neighboring APs,
measuring strength of the signals as received from
other APs, studying RF interference levels at
various APs, characterizing APs' coverage etc.
These changes to the radio interface and the clients'
configuration through this MIB are temporary and
won't be retained across reloads.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
- cDot11RadioDiagTable
- This table allows a network management system to control the behavior of the radio interface on an 802.11 station and the 802.11 clients associated with that station through that particular interface for the purpose of radio environment diagnosis. The ad ...
- cDot11RadioDiagEntry
- An entry holds the set of temporary values for the parameters to be applied to one particular dot11 interface and the respective clients to temporarily alter their behavior.
- cDot11RadioDiagTempChannel
- Temporary channel number for the 802.11 interface identified by ifIndex. The value this object takes depends on the value of the object dot11PHYType defined in IEEE802dot11-MIB. The semantics are as follows. If dot11PHYType equals 'ofdm', the acceptable v ...
- cDot11RadioDiagTempTxPowerLevel
- Temporary transmit power level for the 802.11 interface identified by ifIndex. A value in the range of 1 to 8 refers to one of the power levels from the MIB table 'dot11PhyTxPowerTable' in IEEE802dot11-MIB. The power levels that can be assigned to this o ...
- cDot11RadioDiagMode
- Test mode as carried by the Cisco Radio Management Extensions in the 802.11 beacon frame. The semantics are described as follows. normal - Indicates that the station is operating in non-test mode. apRadioDiscovery - Indicates that this station is operati ...
- cDot11RadioDiagSettingsEnabled
- A flag to indicate whether the station will apply the temporary channel, transmit power settings and the data rate sets configured in this entry to the particular dot11 interface and the client transmit power setting to the clients associated with this st ...
- cDot11RadioDiagTempClientTxPower
- Temporary transmit power level for the 802.11 clients associated with this station through the 802.11 interface identified by ifIndex. The value configured through this object is carried by the beacon frames transmitted by this 802.11 station and picked u ...
- cDot11RadioDiagTempDataRateSet
- This object specifies the set of data rates at which the station may transmit data through the dot11 interface identified by ifIndex. The semantics of this object are similar to that of the object dot11OperationalRateSet of IEEE802dot11-MIB. Each octet c ...
- cDot11RadioDiagConfigGlobalGroup
- This collection of objects provide information about the temporary radio configuration to be applied to the station's 802.11 interfaces.
- cDot11RadioDiagConfigGroupRev1
- This collection of objects provide information about the temporary radio configuration to be applied to the station's 802.11 interfaces and the associated clients.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
