CISCO-ENHANCED-SLB-MIB Download

MIBs list

The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB extends the tables(as appropriate) that are defined in CISCO-SLB-MIB and CISCO-SLB-EXT-MIB.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-ENHANCED-SLB-MIB

cesRealServerFarmGroup: The group contains obbjects for real server configuration in a server farm.
cesRserverTable: A table of real servers. A real server is identified by a name.
cesRserverEntry: An entry in real server table. Each entry refers to real server and contains real server IP Address, maximum connections supported, minimum connections supported, redirect code, redirect port etc. The 'slbEntity' is used in identifying the module in which ...
cesRserverName: This object identifies the name(unique identifier) of the real server.
cesRserverType: The type of the real server. The possible values are : redirect(1): Specifies that this real server is just used for redirecting traffic to new virtual server equivalent pointed to by the redirection string (cesRserverRedirectRelocationStr). host (2): S ...
cesRserverIpAddressType: The type of the internet Address configured in 'cesRserverIpAddress'. This object is applicable only for cesRserverType value 'host'.
cesRserverIpAddress: This object specifies the internet address of real server. This object is applicable only for cesRserverType value 'host'. This object contains zero length octet string for cesRserverType value other than 'host'.
cesRserverDescription: This object is used for configuring the description of the real server.
cesRserverMaxConns: This object is used for configuring the maximum number of concurrent active connections this real server can handle.
cesRserverMinConns: This object is used for configuring the minimum number of concurrent active connections this real server can handle. The value for this object must to be less than or equal to value specified in cesRserverMaxConns object.
cesRserverAdminWeight: The user configured weight of the real server for the load-balancing algorithms. This is applicable only in case of weighted Round Robin Predictor algorithms (SlbPredictor values: 'roundRobin', 'leastConns'). A weight of zero indicates that no new connect ...
cesRserverRedirectRelocationStr: The relocation URL string used for redirection. This value is sent in the reply of the Redirect Server. This object is applicable only for cesRserverType value 'redirect'.
cesRserverRedirectCode: The HTTP response code sent in the reply by the redirect server. meaning of few Redirect Codes: 301 : If page is permanently moved. The requested resource has been assigned a new permanent URL. 302 : The requested resource resides temporarily under a diff ...
cesRserverRedirectPort: The TCP or UDP port of redirect server. This is used for redirecting the URL string identified by 'cesRserverRedirectRelocationStr'. This object is applicable only for cesRserverType = 'redirect'.
cesRserverAdminStatus: This is used for setting the administrative status of the Real server. If set to 'inService', the real server is placed into service. If set to 'outOfService' the real server is taken out of service.
cesRserverOperStatus: This object provides the current state of the real server.
cesRserverStatechangeDescr: This object contains the descriptive text qualifying the reason for the value in cesRserverOperStatus. Examples: ARP failure Health probe failed.
cesRserverStorageType: The storage type for this conceptual row.
cesRserverRowStatus: The object is used for adding/deleting entries in the table. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writeable object. This object may be modifi ...
cesRserverTotalConns: The total number of connections loadbalanced to this real server.
cesRserverFailedConns: The total number of failed attempts to establish a connection to the real server.
cesRserverCurrConns: The total number of active connections loadbalanced to this real server.
cesRserverProbeTable: The Rserver health probe table. This table contains list of health probes configured in a Rserver.
cesRserverProbeEntry: An entry in Rserver probe table. Each entry is for a health probe configured in a Rserver. There can be multiple health probes configured in a Rserver. The 'slbEntity' is used in identifying the module in which configuration is applied. The 'cesRserverNam ...
cesRserverProbeName: The name of the health probe configured in a Rserver. This value must correspond to an entry in cslbxProbeCfgTable.
cesRserverProbeStorageType: The storage type for this conceptual row.
cesRserverProbeRowStatus: The object is used for adding/deleting entries from this table.
cesRserverProbesPassed: This object contains the number of probes passed for this Rserver. The probe is identified as pass if the Rserver returns a valid response.
cesRserverProbesFailed: This object contains the number of probes failed for this Rserver. The probe is identified as failed if the Rserver fails to provide a valid response for a specified number of retries.
cesRserverProbeHealthMonState: This object contains the health monitor state of the probe for this Rserver.
cesRserverProbeLastProbeTime: This object indicates the date and time of the last probe.
cesRserverProbeLastActiveTime: This object indicates the last date and time that the probe's state transitioned to 'active'
cesRserverProbeLastFailedTime: This object indicates the last date and time that the probe's state transitioned to 'failed'
cesServerFarmRserverTable: A table of real servers configured in a server farm. This table is used for configuring real server (cesRserverName) in a server farm(slbServerFarmName) and configuring attributes of real server specific to a server farm. The real server identified by 'c ...
cesServerFarmRserverEntry: Information about a real server in a system. Each entry refers to real server and contains information such as real server IP Address, maximum connections supported, minimum connections supported etc. The 'slbEntity' refers to the module in which this con ...
cesServerFarmRserverPort: The port number of the real server. The value zero specifies that port number is not used in conjunction with real server IP Address.
cesServerFarmRserverAdminWeight: This object specifies user configured weight of the real server under the serverfarm for the load-balancing algorithms. If value is not specified, then the value specified in the object cesRserverAdminWeight is used.
cesServerFarmRserverOperWeight: The actual operating weight of the real server used by the load-balancing algorithms. This can be adjusted dynamically by DFP/SASP. A weight of zero indicates that no new connections will be assigned to this real server. Higher weight values indicate to ...
cesServerFarmRserverMaxConns: This object specfies the maximum number of connections that can be supported by the real server. If value is not specified, then the value specified in the object cesRserverMaxConns is used.
cesServerFarmRserverMinConns: This object specifies the minimum number of connections that needs to be supported by the real server. The value of this object must be less than or equal to value specified in cesServerFarmRserverMaxConns object. The value in this object is relevant onl ...
cesServerFarmRserverAdminStatus: This is used for setting the administrative status of the Real server a server farm.
cesServerFarmRserverOperStatus: This object provides the current state of the real server in a server farm.
cesServerFarmRserverStateDescr: This object contains the descriptive text qualifying the reason for the value in cesServerFarmRserverOperStatus. Examples: ARP failure Health probe failed.
cesServerFarmRserverBackupName: This object specifies the backup real server. The value of this object cannot be same as the value specified in the INDEX cesRserverName. This value must correspond to an entry in cesRserverTable. The zero length value is not considered as a valid real se ...
cesServerFarmRserverBackupPort: This is the port number of the backup real server configured in 'cesServerFarmRserverBackupName'. This object can be configured only if the value specified in cesServerFarmRserverBackupName is valid. The value of this object is of signficance for the vali ...
cesServerFarmRserverTotalConns: The total number of connections loadbalanced to this real server.
cesServerFarmRserverFailedConns: The number of failed connections after which the real server goes to Failed state. A failed connection is when a SYN timeouts or a RST is received from the real server.
cesServerFarmRserverDroppedConns: The total number of connections that were not connected to this server due to the current connection count being at the max number of allowed connections(cevServerFarmRserverMaxConns value) to this real server.
cesServerFarmRserverCurrentConns: The number of connections currently assigned to this real server. This object represents the connections that are still active.
cesServerFarmRserverStorageType: The storage type for this conceptual row.
cesServerFarmRserverRowStatus: This object is used for adding/deleting entries in the table.
cesServerFarmRserverDescr: This object contains the descriptive text qualifying the real server.
cesRealServerProbeTable: The real server health probe table. This table can be used for configuring probes in a real server.
cesRealServerProbeEntry: An entry in real server probe table. An entry in the table is created when a probe is associated with a real server. An entry is deleted when a probe is dissociated with a real server. The 'slbEntity' is used in identifying the module in which configurati ...
cesRealServerProbeStorageType: The storage type for this conceptual row.
cesRealServerProbeRowStatus: The object is used for adding/deleting entries from this table.
cesRealServerNotifEnable: This object is used for enabling/disabling notifications related to real servers.
cesRealServerName: This object identifies the real server name that are sent in notifications. This object contains the value of object cesRserverName. This object is set to zero length octet string value if the real server name is not available or applicable.
cesProbeName: This object identifies the probe name that are sent in notification. This object must correspond to an entry in cslbxProbeCfgTable. This object is set to zero length octet string value if the probe is not available/applicable.
cesServerFarmName: This object identifies the server farm name that are sent in notifications. This object contains the value of object slbServerFarmName. This object is set to zero length octet string value if the server farm name is not available or applicable.
cesRealServerGroup: This group contains objects applicable for Rserver configuration.
cesNotificationObjectGroup: This group contains objects related to notification.
cesRealServerGroupRev1: This group contains objects applicable for Rserver configuration.
cesRserverProbeGroup: This group contains objects applicable for Rserver probe configuration and Rserver probe statistics.
cesRealserverProbeGroup: This group contains objects applicable for real server probe configuration.
cesRserverProbeGroupRev1: This group contains objects applicable for Rserver probe configuration and Rserver probe statistics.
cesRealServerFarmGroupRev1: The group contains objects for real server configuration in a server farm.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list