CISCO-ETHER-CFM-MIB Download
This MIB module defines the managed objects
and notifications for Ethernet Connectivity
Fault Management (CFM).
CFM is an end-to-end per service instance Ethernet layer
Operations, Administration and Management (OAM) protocol.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-ETHER-CFM-MIB
- cEtherCfmMaxEventIndex
- This object specifies the maximum upper value supported for the cEtherCfmEventIndex index by this agent.
- cEtherCfmEventTable
- This table contains a collection of Ethernet CFM notifications generated by the device. The notifications correspond to events recognized by the device and fall into the following classes: - MEP-Up - MEP-Down - Configuration Error - Forwarding Loop - Cros ...
- cEtherCfmEventEntry
- An entry in this table is created for every event reported by Ethernet CFM.
- cEtherCfmEventDomainIndex
- This object represents the ID which uniquely identifies a CFM maintenance domain on the device. Every domain can be uniquely identified by its user-defined name (cEtherCfmEventDomainName) or device-assigned ID (this object).
- cEtherCfmEventSvlan
- The service VLAN identifier of the customer service instance to which the event belongs.
- cEtherCfmEventIndex
- A monotonically increasing integer for the sole purpose of indexing CFM events. When it reaches the maximum value supported by the agent, as defined in the cEtherCfmMaxEventIndex object, the agent wraps the value back to 1 and may flush existing entries.
- cEtherCfmEventDomainName
- The name of the CFM maintenance domain.
- cEtherCfmEventType
- This object informs the management station of how to interpret the rest of the objects within a row, as summarized in the following table: Legend I: Ignored Object V: Valid Object Object cEtherCfmEventType | 1 | 2 | 3 | 4 | ...
- cEtherCfmEventLastChange
- The value of sysUpTime at the time when this row was created.
- cEtherCfmEventServiceId
- The customer service instance to which the event belongs.
- cEtherCfmEventLclMepid
- The identifier of the local MEP impacted by the event.
- cEtherCfmEventLclMacAddress
- The MAC address of the device reporting the event.
- cEtherCfmEventLclMepCount
- The number of local MEPs affected by the event.
- cEtherCfmEventLclIfCount
- The number of local interfaces affected by the event.
- cEtherCfmEventRmtMepid
- The maintenance end-point identifier of the remote MEP causing the event entry to be logged.
- cEtherCfmEventRmtMacAddress
- The MAC address of the remote maintenance point for which the event entry is being logged.
- cEtherCfmEventRmtPortState
- The operational state of the port on which the remote MEP is configured. This information is derived from the port-state as indicated in the CC message. The possible values are: 'up' - The port is operationally up. 'down' ...
- cEtherCfmEventRmtServiceId
- The ID that the remote device has configured for the customer service instance (VLAN).
- cEtherCfmEventCode
- This object is used in decoding 'mepUp' and 'mepDown' events. ** For 'mepUp', the following codes are relevant: 'new' - This is the very first time the device receives a CC message from the remote MEP. 'returning' - The device received a CC ...
- cEtherCfmEventDeleteRow
- This object allows the management station to delete a row in the cEtherCfmEventTable in order to free system resources. When reading this object the value of 'noop' will be returned. This object can only be set to 'delete'. When this object is set to 'del ...
- ciscoEtherCfmMIBEventGroup
- Set of objects needed for CFM events.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
