CISCO-FC-ROUTE-MIB Download

fcRouteLastChangeTime

The value of sysUpTime at the most recent time when a conceptual row was created, modified, or deleted in fcRouteTable. If no change has occurred since the last restart of the management system, then the value of this object is 0.

fcRoutePreference

The value of route preference.Route preference is the value used to select one route over other when more than one route to the same destination is learned from different protocols, peers, or static routes from end-users. The preference value is an arbitr ...

fcRouteVerifyAction

The action to perform a consistency check of fcRouteTable. none (1) - no action verify (2) - perform verify action Writing verify(2) does a consistency check of the fcRouteTable with either one of the following: - with routeTable in the persistent datab ...

fcRouteVerifyType

The value used by fcRouteVerifyAction to perform the consistency check of fcRouteTable with: - route table in persistent database if value is pss(1) - forwarding information base software tables if value is fibShadow(2) - forwarding information base hardw ...

fcRouteVerifyModule

This value identifies a particular line card module according to that module's value of entPhysicalIndex in the entPhysicalTable of the ENTITY-MIB (RFC 2737). The forwarding information base present on this module is checked for consistency with the fcRou ...

fcRouteVerifyVsanID

The value specifies the VSAN id. The fcRouteTable entries and the entries in the table specified by fcRouteVerifyType is checked for consistency for the same VSAN id specified by this object.

fcRouteVerifyRouteType

The value used by fcRouteVerifyAction to perform the consistency check of fcRouteTable. If the value is unicast(1) then only unicast entries in fcRouteTable and the entries in the table specified by fcRouteVerifyType are checked. If value is multicast(2) ...

fcRouteVerifyResult

The object displays the details of the first inconsistency that occured from the check. If the check passes successfully then this will be a zero-length string.

fcRouteVerifyLock

This object is used to facilitate the verify action performed using 'fcRouteVerifyAction' by multiple managers. The procedure to perform the action by the NMS is as follows: 1. Retrieve the value of fcRouteVerifyLock. 2. Set the value of fcRouteVerifyLock ...

fcRouteTable

The local system's Fibre Channel Routing table. This table lists all the routes that is configured/ calculated at the local system. Traffic through the TL-Port (translation port) uses the R-CTL field in the FC protocol header. During forwarding, this R-CT ...

fcRouteEntry

Each entry contains a route to a particular destination in a particular VSAN via a particular output interface, and learned in a particular manner.

fcRouteDestAddrId

The destination FC-ID of this route.

fcRouteDestMask

Indicate the mask to be logical-ANDed with the destination address Id before being compared to the value in the fcRouteDestAddrId field. This can only be 255.255.255 or 255.255.0 or 255.0.0 .

fcRouteProto

The routing mechanism via which this route was learned. other(1) - not specified local(2) - local interface netmgmt(3)- static route The following are all dynamic routing protocols fspf(4) - Fibre Shortest Path First mpls(5) - Multiple Protocol Labe ...

fcRouteInterface

The ifIndex value, which identifies the local interface through which the next hop of this route should be reached. If the interface type is TL-Port then R-CTL field in the FC protocol header is also used for look-up in the route table during forwarding. ...

fcRouteDomainId

The domain ID of next hop switch. However this object, when read, could have a value zero if value of fcRouteProto is 'local'.

fcRouteMetric

The routing metric for this route. The use of this object is dependent on fcRouteProto used.

fcRouteType

The type of route. local(1): refers to a route for which the next hop is the final destination; remote(2): refers to a route for which the next hop is not the final destination. This object is not relevent for multicast and broadcast route entries.

fcRoutePermanent

The value if true(1), indicates the route is not to be removed from the relevant Forwarding information base even if the port is operationally 'down'. If false(2), the route is removed from the relevant Forwarding information base (FIB) if the port is ope ...

fcRouteRowStatus

The status of this conceptual row.

fcRouteFlowStatTable

The table to configure and show the ingress traffic counters on physical components (e.g., Linecards). The user has the option of configuring counters depending on the bits selected for the object fcRouteFlowType. If the user selects only vsanId(0) bit f ...

fcRouteFlowStatEntry

Each entry provides information on the ingress traffic counters at the physical component indicated by entPhysicalIndex. Entries can only be created for physical components, e.g.,line cards, which support this type of ingress traffic counters.

fcRouteFlowIndex

The index of this entry.

fcRouteFlowType

The matching criteria by which flows are selected to be included in the traffic which is instrumented by the ingress traffic counters. For each bit which is set, the corresponding object must be configured by the network manager when creating an entry. vs ...

fcRouteFlowVsanId

The id of VSAN. This object cannot be modified while the corresponding value of fcRouteFlowRowStatus is equal to 'active'.

fcRouteFlowDestId

The destination fibre channel address id. This object cannot be modified while the corresponding value of fcRouteFlowRowStatus is equal to 'active'.

fcRouteFlowSrcId

The source fibre channel address id. This object cannot be modified while the corresponding value of fcRouteFlowRowStatus is equal to 'active'.

fcRouteFlowMask

The mask for source and destination fibre channel address id. This object cannot be modified while the corresponding value of fcRouteFlowRowStatus is equal to 'active'.

fcRouteFlowPort

The physical ingress port to which this counter applies. This object cannot be modified while the corresponding value of fcRouteFlowRowStatus is equal to 'active'.

fcRouteFlowFrames

The number of received frames for the flow created by the network manager.

fcRouteFlowBytes

The number of received frame bytes for the flow created by the network manager.

fcRouteFlowCreationTime

The timestamp indicating the time the row was created or modified.

fcRouteFlowRowStatus

The status of this conceptual row.

fcRouteGroup

A collection of objects giving route information.

fcRouteTableGroup

A collection of objects for displaying and configuring route's.

fcRouteStatGroup

A collection of objects for displaying and configuring ingress traffic flow counters.