CISCO-IETF-ISIS-MIB Download

ciiSysVersion

The version number of the IS-IS protocol that is implemented.

ciiSysType

At which levels is the Intermediate System running? This object follows the replaceOnlyWhileDisabled behavior.

ciiSysID

The ID for this Intermediate System. This value is appended to each of the area addresses to form the Network Entity Titles. The derivation of a value for this object is implementation-specific. Some implementations may automatically assign values and no ...

ciiSysMaxPathSplits

Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behavior.

ciiSysMaxLSPGenInt

Maximum interval, in seconds, between generated LSPs by this Intermediate System. This object follows the resettingTimer behavior. The value must be greater than any value configured for ciiSysLevelMinLSPGenInt, and should be at least 300 seconds less th ...

ciiSysPollESHelloRate

The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.

ciiSysWaitTime

Number of seconds to delay in 'waiting' state before entering 'on' state. This object follows the resettingTimer behavior.

ciiSysAdminState

The administrative state of this Intermediate System. Setting this object to the value 'on' when its current value is 'off' enables the Intermediate System.

ciiSysL2toL1Leaking

If true, allow the router to leak L2 routes into L1.

ciiSysMaxAge

Value to place in RemainingLifeTime field of the LSPs we generate. This should be at least 300 seconds greater than ciiSysMaxLSPGenInt.

ciiSysReceiveLSPBufferSize

Size of the largest Buffer we are designed or configured to store. This should be at least as big as the maximum ciiSysLevelOrigLSPBuffSize supported by the system. If resources allow, we will store and flood LSPs larger than ciiSysReceiveLSPBufferSize, ...

ciiManAreaAddrTable

The set of manual area addresses configured on this Intermediate System.

ciiManAreaAddrEntry

Each entry contains one area address manually configured on this system

ciiManAreaAddr

A manually configured area address for this system. This object follows the index behavior. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of ...

ciiManAreaAddrExistState

The state of the ciiManAreaAddrEntry. This object follows the Row Status behavior. If the ciiSysAdminState for this Intermediate System is 'on', and an attempt is made to set this object to the value 'destroy' or 'notInService' when this is the only ciiMa ...

ciiAreaAddrTable

The union of the sets of area addresses reported in all Level 1 LSPs with fragment number zero generated by this Intermediate System, or received from other Intermediate Systems which are reachable via Level 1 routing.

ciiAreaAddrEntry

Each entry contains one area address reported in a Level 1 LSP generated or received by this Intermediate System.

ciiAreaAddr

An area address reported in a Level 1 LSP.

ciiSysProtSuppTable

This table contains the manually configured set of protocols supported by this Intermediate System.

ciiSysProtSuppEntry

Each entry contains one protocol supported by this Intermediate System.

ciiSysProtSuppProtocol

One supported protocol. This object follows the index behavior.

ciiSysProtSuppExistState

The state of the ciiSysProtSuppEntry. This object follows the RowStatus behavior.

ciiSummAddrTable

The set of IP summary addresses to use in forming summary TLVs originated by this Intermediate System. An administrator may use a summary address to combine and modify IP Reachability announcements. If the Intermediate system can reach any subset of the ...

ciiSummAddrEntry

Each entry contains one IP summary address.

ciiSummAddressType

The Type of IP address for this summary address. This object follows the index behavior.

ciiSummAddress

The IP Address value for this summary address. This object follows the index behavior.

ciiSummAddrPrefixLen

The Length of the IP NetMask for this summary address.

ciiSummAddrExistState

The existence state of this summary address. This object follows the row status behavior.

ciiSummAddrMetric

The metric value to announce this summary address with in LSPs generated by this system.

ciiSummAddrFullMetric

The wide metric value to announce this summary address with in LSPs generated by this system.

ciiRedistributeAddrTable

This table provides criteria to decide if a route should be leaked from L2 to L1 when Domain Wide Prefix leaking is enabled. Addresses that match the summary mask in the table will be announced at L1 by routers when ciiSysL2toL1Leaking is enabled. Routes ...

ciiRedistributeAddrEntry

Each entry contains one IP summary address to manage leaking L2 addresses into L1.

ciiRedistributeAddrType

The Type of IP address for this summary address. This object follows the index behavior.

ciiRedistributeAddrAddress

The IP Address value for this summary address. This object follows the index behavior.

ciiRedistributeAddrPrefixLen

The Length of the IP NetMask for this summary address.

ciiRedistributeAddrExistState

The existence state of this summary address. This object follows the row status behavior.

ciiRouterTable

The set of hostnames and router ID.

ciiRouterEntry

Each entry tracks information about one peer at one level.

ciiRouterSysID

The System ID of the Router Peer.

ciiRouterLevel

The level of this Intermediate System.

ciiRouterHostName

The hostname listed in LSP, or zero-length string if none.

ciiRouterID

The Router ID of the Peer found in LSP, or zero if none.

ciiSysLevelTable

Level specific information about the System.

ciiSysLevelEntry

Describe variables defined for Area or Domain.

ciiSysLevelIndex

The level that this entry describes.

ciiSysLevelOrigLSPBuffSize

The maximum size of LSPs and SNPs originated by this Intermediate System at this level. This object follows the replaceOnlyWhileDisabled behavior.

ciiSysLevelMinLSPGenInt

Minimum interval, in seconds, between successive generation of LSPs with the same LSPID at this level by this Intermediate System. This object follows the resettingTimer behavior.

ciiSysLevelOverloadState

The state of the database at this level. The value 'off' indicates that IS-IS is not active at this level. The value 'on' indicates that IS-IS is active at this level, and not overloaded. The value 'waiting' indicates a database that is low on an essentia ...

ciiSysLevelSetOverload

Administratively set the overload bit for the level. The overload bit will continue to be set if the implementation runs out of memory, independent of this variable

ciiSysLevelSetOverloadUntil

If set, the overload bit should be set, and cleared after sysUpTime exceeds this value.

ciiSysLevelMetricStyle

Which style of Metric do we generate in our LSPs at this level? This object follows the replaceOnlyWhileDisabled behavior.

ciiSysLevelSPFConsiders

Which style of Metric do we consider in our SPF computation at this level?

ciiSysLevelTEEnabled

Do we do Traffic Engineering at this level?

ciiNextCircIndex

This object is used to assign values to ciiCircIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads this object, and then writes the value back as the ciiCircIndex in a SET that creates a new instance of ciiCircEntry. If the ...

ciiCircTable

The table of circuits used by this Intermediate System.

ciiCircEntry

An ciiCircEntry exists for each circuit used by Integrated IS-IS on this system.

ciiCircIndex

The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value.

ciiCircIfIndex

The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation

ciiCircIfSubIndex

A specifier for the part of the interface ifIndex to which this circuit corresponds, such as a DLCI or VPI/VCI. This object cannot be modified after creation

ciiCircAdminState

The administrative state of the circuit. This object follows the CiiAdminState behavior.

ciiCircExistState

The existence state of this circuit. This object follows the RowStatus behavior. Setting the state to 'notInService' halts the generation and processing of IS-IS protocol PDUs on this circuit. Setting the state to 'destroy' will also erase any configura ...

ciiCircType

The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of ciiCircIfIndex.

ciiCircExtDomain

If true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit.

ciiCircLevel

Indicates which type of packets will be sent and accepted on this circuit. The values used will be modified by the settings of ciiSysType. This object follows the replaceOnlyWhileDisabled behavior.

ciiCircPassiveCircuit

Should we include this interface in LSPs, even if it is not running the IS-IS Protocol?

ciiCircMeshGroupEnabled

Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.

ciiCircMeshGroup

Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If ciiCircMeshGroupEnabled is inactive or blocked, this value is ignored.

ciiCircSmallHellos

Can we send unpadded hellos on LAN circuits? 'false' means LAN Hellos must be padded. Implementations should allow the administrator to read this value. An implementation need not be able to support unpadded hellos to be conformant.

ciiCircLastUpTime

If the circuit is enabled, the value of sysUpTime when ciiCircAdminState most recently entered the state 'on'. If the circuit is not 'on', the value of sysUpTime when the circuit last entered state 'on', 0 if the circuit has never been 'on'.

ciiCirc3WayEnabled

Is this circuit enabled to run 3Way handshake?

ciiCircExtendedCircID

The value to be used as the extended circuit ID in 3Way handshake. This value is only used if ciiCirc3WayEnabled is true, and must be unique across all circuits on this IS.

ciiCircLevelTable

Level specific information about circuits used by IS-IS

ciiCircLevelEntry

An ciiCircLevelEntry exists for each level on each circuit used by Integrated IS-IS on this system.

ciiCircLevelIndex

The level that this entry describes.

ciiCircLevelMetric

The metric value of this circuit for this level.

ciiCircLevelWideMetric

The wide metric value of this circuit for this level.

ciiCircLevelISPriority

The priority for becoming LAN Designated Intermediate System at this level.

ciiCircLevelIDOctet

A one byte identifier that can be used in protocol packets to identify a circuit. Values of ciiCircLevelIDOctet do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.

ciiCircLevelID

On a point to point circuit with a fully initialized adjacency to a peer IS, the value of this object is the circuit ID negotiated during adjacency initialization. On a point to point circuit without such an adjacency, the value is the concatenation of th ...

ciiCircLevelDesIS

The ID of the LAN Designated Intermediate System on this circuit at this level. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.

ciiCircLevelHelloMultiplier

This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS

ciiCircLevelHelloTimer

Maximum period, in milliseconds, between IIH PDUs on multiaccess networks at this level for LANs. The value at L1 is used as the period between Hellos on L1L2 point to point circuits. Setting this value at level 2 on an L1L2 point to point circuit will r ...

ciiCircLevelDRHelloTimer

Period, in milliseconds, between Hello PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behavior.

ciiCircLevelLSPThrottle

Minimal interval of time, in milliseconds, between transmissions of LSPs on an interface at this level.

ciiCircLevelMinLSPRetransInt

Minimum interval, in seconds, between re-transmission of an LSP at this level. This object follows the resettingTimer behavior. Note that ciiCircLevelLSPThrottle controls how fast we send back to back LSPs. This variable controls how fast we re-send the ...

ciiCircLevelCSNPInterval

Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this level. This object follows the resettingTimer behavior.

ciiCircLevelPartSNPInterval

Minimum interval in seconds between sending Partial Sequence Number PDUs at this level. This object follows the resettingTimer behavior.

ciiSystemCounterTable

System wide counters for this Intermediate System.

ciiSystemCounterEntry

System-wide IS-IS counters.

ciiSysStatLevel

The level that this entry describes.

ciiSysStatCorrLSPs

Number of corrupted in-memory LSP frames detected. LSPs received from the wire with a bad checksum are silently dropped and not counted. LSPs received from the wire with parse errors are counted by ciiSysStatLSPErrors.

ciiSysStatAuthTypeFails

The number of frames with authentication type mismatches recognized by this Intermediate System.

ciiSysStatAuthFails

The number of frames with authentication failures recognized by this Intermediate System.

ciiSysStatLSPDbaseOloads

Number of times the LSP database has become overloaded.

ciiSysStatManAddrDropFromAreas

Number of times a manual address has been dropped from the area.

ciiSysStatAttmptToExMaxSeqNums

Number of times the IS has attempted to exceed the maximum sequence number.

ciiSysStatSeqNumSkips

Number of times a sequence number skip has occurred.

ciiSysStatOwnLSPPurges

Number of times a zero-aged copy of the system's own LSP is received from some other node.

ciiSysStatIDFieldLenMismatches

Number of times a PDU is received with a different value for ID field length to that of the receiving system.

ciiSysStatPartChanges

Partition changes

ciiSysStatSPFRuns

Number of times we ran SPF at this level.

ciiSysStatLSPErrors

Number of LSP frames with errors we have received.

ciiCircuitCounterTable

Circuit specific counters for this Intermediate System.

ciiCircuitCounterEntry

An ciiCircuitCounterEntry exists for each circuit used by Integrated IS-IS on this system.

ciiCircuitType

What type of circuit saw these counts? The point to point Hello PDU includes both L1 and L2, and ISs form a single adjacency on point to point links. Thus we combine counts on point to point links into one group.

ciiCircAdjChanges

The number of times an adjacency state change has occurred on this circuit.

ciiCircNumAdj

The number of adjacencies on this circuit.

ciiCircInitFails

The number of times initialization of this circuit has failed. This counts events such as PPP NCP failures. Failures to form an adjacency are counted by ciiCircRejAdjs.

ciiCircRejAdjs

The number of times an adjacency has been rejected on this circuit.

ciiCircIDFieldLenMismatches

The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.

ciiCircMaxAreaAddrMismatches

The number of times an IS-IS control PDU with a max area address field different to that for this system has been received.

ciiCircAuthTypeFails

The number of times an IS-IS control PDU with an auth type field different to that for this system has been received.

ciiCircAuthFails

The number of times an IS-IS control PDU with the correct auth type has failed to pass authentication validation.

ciiCircLANDesISChanges

The number of times the Designated IS has changed on this circuit at this level. If the circuit is point to point, this count is zero.

ciiPacketCounterTable

Information about IS-IS protocol traffic at one level on one circuit in one direction

ciiPacketCounterEntry

Information about IS-IS protocol traffic at one level on one circuit in one direction

ciiPacketCountLevel

The level at which these PDU counts have been collected.

ciiPacketCountDirection

Were we sending or receiving these PDUs?

ciiPacketCountIIHellos

The number of IS-IS Hello PDU frames seen in this direction at this level. Point-to-Point IIH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.

ciiPacketCountISHellos

The number of ES-IS Hello PDU frames seen in this direction. ISH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.

ciiPacketCountESHellos

The number of ES Hello PDU frames seen in this direction. ESH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.

ciiPacketCountLSPs

The number of IS-IS LSP frames seen in this direction at this level.

ciiPacketCountCSNPs

The number of IS-IS CSNP frames seen in this direction at this level.

ciiPacketCountPSNPs

The number of IS-IS PSNP frames seen in this direction at this level.

ciiPacketCountUnknowns

The number of unknown IS-IS PDU frames seen at this level.

ciiISAdjTable

The table of adjacencies to Intermediate Systems.

ciiISAdjEntry

Each entry corresponds to one adjacency to an Intermediate System on this system.

ciiISAdjIndex

A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjacency is created.

ciiISAdjState

The state of the adjacency

ciiISAdj3WayState

The 3Way state of the adjacency. These are picked to match the historical on-the-wire representation of the 3Way state, and are not intended to match ciiISAdjState.

ciiISAdjNeighSNPAAddress

The SNPA address of the neighboring system.

ciiISAdjNeighSysType

The type of the neighboring system.

ciiISAdjNeighSysID

The system ID of the neighboring Intermediate System.

ciiISAdjNbrExtendedCircID

The 4 byte Extended Circuit ID learned from the Neighbor during 3-way handshake, or 0.

ciiISAdjUsage

How is the adjacency used? On a point-to-point link, this might be level1and2, but on a LAN, the usage will be level1 on the adjacency between peers at L1, and level2 for the adjacency between peers at L2.

ciiISAdjHoldTimer

The holding time in seconds for this adjacency. This value is based on received IIH PDUs and the elapsed time since receipt.

ciiISAdjNeighPriority

Priority of the neighboring Intermediate System for becoming the Designated Intermediate System.

ciiISAdjLastUpTime

If the ciiISAdjState is in state 'up', the value of sysUpTime when the adjacency most recently entered the state 'up', or 0 if it has never been in state 'up'.

ciiISAdjAreaAddrTable

This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.

ciiISAdjAreaAddrEntry

Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs.

ciiISAdjAreaAddrIndex

An index for the areas associated with one neighbor. This provides a simple way to walk the table.

ciiISAdjAreaAddress

One Area Address as reported in IIH PDUs received from the neighbor.

ciiISAdjIPAddrTable

This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.

ciiISAdjIPAddrEntry

Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs.

ciiISAdjIPAddrIndex

An index to this table which identifies the IP addresses to which this entry belongs.

ciiISAdjIPAddrType

The type of one IP Address as reported in IIH PDUs received from the neighbor.

ciiISAdjIPAddrAddress

One IP Address as reported in IIH PDUs received from the neighbor.

ciiISAdjProtSuppTable

This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs.

ciiISAdjProtSuppEntry

Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs.

ciiISAdjProtSuppProtocol

One supported protocol as reported in IIH PDUs received from the neighbor.

ciiRATable

The table of Reachable Addresses to NSAPs or Address Prefixes.

ciiRAEntry

Each entry defines a Reachable Address to a NSAP or Address Prefix.

ciiRAIndex

The identifier for this ciiRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. This object follows the index and ManualOrAutomatic behaviors.

ciiRAExistState

The existence state of this Reachable Address. This object follows the ManualOrAutomatic behaviors.

ciiRAAdminState

The administrative state of the Reachable Address. This object follows the CiiAdminState and ManualOrAutomatic behaviors.

ciiRAAddrPrefix

The destination of this Reachable Address. This is an Address Prefix. This object follows the replaceOnlyWhileDisabled and ManualOrAutomatic behaviors.

ciiRAMapType

The type of mapping to be employed to ascertain the SNPA Address which should be used in forwarding PDUs for this Reachable Address prefix. This object follows the ManualOrAutomatic behavior. The following values of mapping type are defined: none: The map ...

ciiRAMetric

The metric value for reaching the specified prefix over this circuit. This object follows the ManualOrAutomatic behavior.

ciiRAMetricType

Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior.

ciiRASNPAAddress

The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches the address prefix of the Reachable Address. This object follows the ManualOrAutomatic behavior.

ciiRASNPAMask

A bit mask with 1 bits indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extraction the first octet of the ciiRASNPAMask object value is aligned with the first octet (AFI) of the ...

ciiRASNPAPrefix

A fixed SNPA prefix for use when the ciiRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNPA part that is extracted from the effective destination address. For Reachable Address prefixes in ...

ciiRAType

The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol (eg. IDRP).

ciiIPRATable

The table of IP Reachable Addresses to networks, subnetworks or hosts either manually configured or learned from another protocol.

ciiIPRAEntry

Each entry defines an IP Reachable Address to a network, subnetwork or host. Each IP Reachable Address may have multiple entries in the table, one for each equal cost path to the reachable address.

ciiIPRADestType

The type of this IP Reachable Address. This object follows the ManualOrAutomatic behavior.

ciiIPRADest

The destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. This object follows the ManualOrAutomatic behavior.

ciiIPRADestPrefixLen

The length of the IP Netmask for Reachability Address. This object follows the ManualOrAutomatic behavior.

ciiIPRANextHopIndex

Index of next hop. Used when there are multiple Equal Cost Multipath alternatives for the same destination.

ciiIPRANextHopType

The type of the IP next hop address.

ciiIPRANextHop

The IP next hop to this destination.

ciiIPRAType

The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol. This object follows the ManualOrAutomatic behavi ...

ciiIPRAExistState

The state of this IP Reachable Address. This object follows the ExistenceState and ManualOrAutomatic behaviors.

ciiIPRAAdminState

The administrative state of the IP Reachable Address. This object follows the CiiAdminState and ManualOrAutomatic behaviors.

ciiIPRAMetric

The metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior.

ciiIPRAMetricType

Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior.

ciiIPRAFullMetric

The wide metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior.

ciiIPRASNPAAddress

The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. This object follows the ManualOrAutomatic behavior.

ciiIPRASourceType

The origin of this route.

ciiLSPSummaryTable

The table of LSP Headers.

ciiLSPSummaryEntry

Each entry provides a summary describing an LSP currently stored in the system.

ciiLSPLevel

At which level does this LSP appear?

ciiLSPID

The 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number.

ciiLSPSeq

The sequence number for this LSP.

ciiLSPZeroLife

Is this LSP being purged by this System?

ciiLSPChecksum

The 16 bit Fletcher Checksum.

ciiLSPLifetimeRemain

The remaining lifetime in seconds for this LSP.

ciiLSPPDULength

The length of this LSP.

ciiLSPAttributes

Flags carried by the LSP.

ciiLSPTLVTable

The contents of each LSP.

ciiLSPTLVEntry

Each entry describes an LSP current stored in the system.

ciiLSPTLVIndex

The index of this TLV in the LSP. The first TLV has index 1 and the Nth TLV has an index of N.

ciiLSPTLVSeq

The sequence number for this LSP.

ciiLSPTLVChecksum

The 16 bit Fletcher Checksum.

ciiLSPTLVType

The type of this TLV.

ciiLSPTLVLen

The length of this TLV.

ciiLSPTLVValue

The value of this TLV.

ciiPduLspId

An Octet String that uniquely identifies a Link State PDU.

ciiPduFragment

Holds up to 64 initial bytes of a PDU that triggered the notification.

ciiPduFieldLen

Holds the System ID length reported in PDU we received.

ciiPduMaxAreaAddress

Holds the Max Area Addresses reported in a PDU we received.

ciiPduProtocolVersion

Holds the Protocol version reported in PDU we received.

ciiPduLspSize

Holds the size of LSP we received that is too big to forward.

ciiPduOriginatingBufferSize

Holds the size of ciiSysLevelOrigLSPBuffSize advertised by the peer in the originatingLSPBufferSize TLV.

ciiPduProtocolsSupported

The list of protocols supported by an adjacent system. This may be empty.

ciiAdjState

The current state of an adjacency.

ciiErrorOffset

An offset to a problem in a PDU. If the problem is a malformed TLV, this points to the beginning of the TLV. If the problem is in the header, this points to the byte that is suspicious.

ciiErrorTLVType

The type for a malformed TLV.

ciiNotifManualAddress

Manually configured area address used in this notification.

ciiNotifIsLevelIndex

The index value used in this notification to indicate the system level.

ciscoIetfIsisSystemGroup

The collections of objects used to manage an IS-IS router.

ciscoIetfIsisCircuitGroup

The collection of objects used to describe in IS-IS Circuit.

ciscoIetfIsisISAdjGroup

The collections of objects used to manage an IS-IS Adjacency.

ciscoIetfIsisNotifObjectGroup

The objects used to record notification parameters.

ciscoIetfIsisISPDUCounterGroup

The collections of objects used to count protocol PDUs.

ciscoIetfIsisRATableGroup

The collections of objects used to manage the reachable NSAP prefixes.

ciscoIetfIsisISIPRADestGroup

The collections of objects used to manage configured IP addresses.

ciscoIetfIsisLSPGroup

The collections of objects used to observe the LSP Data Base.