CISCO-IETF-VPLS-BGP-EXT-MIB Download

ciVplsBgpExtConfigTable

This table specifies information for configuring and monitoring BGP-specific parameters for VPLS. A row is automatically created when a VPLS is configured using BGP signalling. None of the read-write objects values can be changed when cvplsConfigRowStatus ...

ciVplsBgpExtConfigEntry

Each Entry represents a conceptual row in ciVplsBgpExtConfigTable and provides the information about BGP-specific information for VPLS in a packet network.

ciVplsBgpExtConfigRouteDistinguisher

This object represents the Route Distingiusher for this VPLS.

ciVplsBgpExtConfigVERangeSize

This object represents the size of the range of VE identifiers in this VPLS. This number controls the size of the label block advertised for this VE by the PE. A value of 0 indicates that the range is not configured and the PE derives the range value from ...

civplsBgpExtRTTable

This table specifies information for the list of RTs imported or exported by BGP during auto-discovery of VPLS.

civplsBgpExtRTEntry

Each Entry represents a conceptual row in civplsBgpExtRTTable and provides the information about the value of the RT being used by BGP. Depending on the value of civplsBgpExtRTType, an RT might be exported or imported or both. Every VPLS, which uses auto- ...

ciVplsBgpExtRTType

This object represents the type of a RT usage. RTs can be specified to be imported, exported, or both.

ciVplsBgpExtRT

The RT associated with the VPLS service.

ciVplsBgpExtRTStorageType

This object indicates the storage type for this row.

ciVplsBgpExtRTRowStatus

This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified.

ciVplsBgpExtVETable

This table associates VPLS Edge devices to a VPLS. The VEs assigned to a VPLS can be configured on a PE. This table has an expansion dependant relationship with cvplsConfigTable. For each row identified by cvplsConfigIndex, there may exist one or more row ...

ciVplsBgpExtVEEntry

Each Entry represents a conceptual row in ciVplsBgpExtVETable and provides the information about VPLS Edge devices.

ciVplsBgpExtVEId

This object identifies a VE associated with a VPLS.

ciVplsBgpExtVEName

This object represents the name of the site or u-PE associated with this VE.

ciVplsBgpExtVEPreference

This object represents the preference of the VE if the site is multi-homed and VE Id is used.

ciVplsBgpExtVEStorageType

This object indicates the storage type for this row.

ciVplsBgpExtVERowStatus

This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified.

ciVplsBgpExtPwBindTable

This table provides BGP-specific information for an association between a VPLS and the corresponding Pseudo Wires. A service can have more than one Pseudo Wire association. Pseudo Wires are defined in the cpwvcTable. Each row represents an association bet ...

ciVplsBgpExtPwBindEntry

Each Entry represents a conceptual row in ciVplsBgpExtPwBindTable and provides the information about BGP-specific information for an association between a VPLS and the corresponding Pseudo Wires.

ciVplsBgpExtPwBindLocalVEId

This object represents the local VE this Pseudo Wire is associated with.

ciVplsBgpExtPwBindRemoteVEId

This object represents the remote VE this Pseudo Wire is associated with.

ciVplsBgpExtConfigGroup

This group of objects help to configure L2VPN VPLS using BGP.

ciVplsBgpExtRTGroup

The group of objects help to manage RTs for L2VPN VPLS using BGP.

ciVplsBgpExtVEGroup

The group of objects help to manage VE devices for L2VPN VPLS using BGP.

ciVplsBgpExtPwBindGroup

The group of objects help to manage Pseudo Wires for L2VPN VPLS using BGP.