CISCO-IP-NW-DISCOVERY-MIB Download
MIB to provide the information about the disjoint
IP networks connected to the various gigabit ethernet
interfaces in the 'Fabric' and objects to discover
the same.
It is possible that multiple disjoint IP networks
may terminate on a single fibre channel switch
in a Fabric.
This MIB provides ability to initiate, configure and
show discovery results of the IP Networks in
the fabric.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-IP-NW-DISCOVERY-MIB
- cIpNetworkAutomaticDiscovery
- This object indicates whether the automatic discovery to find the reachability on the IP networks is enabled or not in the system. If automatic discovery is not enabled in the system then the discovery operation can be initiated only manually by the user. ...
- cIpNetworkDiscoveryDelay
- This object indicates the time duration between the state change of an IP interface and the start of discovery operation of interface, if Automatic discovery is configured as 'true' in the cIpNetworkAutomaticDiscovery object. The value '0' indicates no de ...
- cIpNetworkDiscoveryTypeSpinLock
- This object is used to facilitate modification of cIpNetworkDiscoverType, cIpNetworkDiscoverPort objects by multiple managers. The procedure for modifying the above two objects (only if the 'cIpNetworkDiscoveryType' is set to tcp/udp) are as follows : 1. ...
- cIpNetworkDiscoveryType
- This object indicates type of discovery packets to be sent for carrying out the IP network discovery.
- cIpNetworkDiscoveryPort
- This object indicates TCP/UDP port used for of IP network discovery operation, if the cIpNetworkDiscoveryType object is set to 'tcp' or 'udp'.
- cIpNetworkDiscoverySpinLock
- This object is used to facilitate modification of cIpNetworkGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover and cIpNetworkDiscoveryCommand objects by multiple managers. The procedure for modifying the above four o ...
- cIpNetworkGigEIfIndexToDiscover
- This object represents the 'ifIndex' of the specified gigabit ethernet interface for which the IP network discovery needs to be done incrementally. This object MUST be set to a valid value before or concurrently with setting the value of the 'cIpNetworkDi ...
- cIpNetworkInetAddrTypeToDiscover
- This object represents the 'InetAddressType' of the address of the Gigabit ethernet port on which to perform the discovery. This object MUST be set to a valid value before or concurrently with setting the value of the 'cIpNetworkDiscoveryCommand' object t ...
- cIpNetworkGigEInetAddrToDiscover
- This object represents the 'InetAddress' of the specified gigabit ethernet interface specified in the 'cIpNetworkGigEIfIndexToDiscover' for which the IP network discovery needs to be done incrementally. This object MUST be set to a valid value before or c ...
- cIpNetworkDiscoveryCommand
- The IP network discovery command to be executed. Command Remarks all Run IP network discovery for all the gigabit ethernet interfaces in the fabric. noOp no operation will be performed. interfaceSpecific Run I ...
- cIpNetworkDiscoveryCmdStatus
- The status of the last IP network discovery command operation. success (1) - IP network discovery operation completed successfully. none (2) - no IP network discovery operation is performed. inProgress (3) - discovery operation is in progress. noGigEIn ...
- cIpNetworkTable
- Represents the discovered list of all IP networks connected to the gigabit ethernet interfaces in the fabric. The entries in this table are populated by the discovery process started either by the auto discovery mechanism or triggered by the user by the s ...
- cIpNetworkEntry
- An entry represents the information about an IP network connected to the gigabit ethernet interface in the fabric.
- cIpNetworkIndex
- An arbitrary integer value, greater than zero which uniquely identifies the IP Network discovered in the fabric.
- cIpNetworkSwitchWWN
- This object represents the WWN of the switch which has created the corresponding entry in this table.
- cIpNetworkInterfaceTable
- A table consisting of entries for all the gigabit ethernet interfaces, which are connected to the various IP networks in the Fabric. The members of the IP networks are dynamically discovered by the discovery process.
- cIpNetworkInterfaceEntry
- An entry (conceptual row) in the 'cIpNetworkInterfaceTable'. Each row represents a gigabit ethernet interface in the fabric and its IP network.
- cIpNetworkGigEPortSwitchWWN
- This object represents the World Wide Name (WWN) of the associated switch in the fabric, of the gigabit ethernet interface mentioned in corresponding instance of 'cIpNetworkGigEPortIfIndex' object.
- cIpNetworkGigEPortIfIndex
- This object represents the 'ifIndex' of the gigabit ethernet interface in a switch in the fabric. The World Wide Name (WWN) of the switch is mentioned in the corresponding instance of 'cIpNetworkGigEPortSwitchWWN'. The gigabit ethernet interface is connec ...
- cIpNetworkGigEPortInetAddrType
- This object represents the InetAddressType of the gigabit ethernet interface.
- cIpNetworkGigEPortInetAddr
- This object represents the InetAddress of the gigabit ethernet interface mentioned in the corresponding instance 'cIpNetworkGigEPortIfIndex' object. The address is of the type indicated by 'cIpNetworkGigEPortInetAddrType'. The gigabit ethernet interface i ...
- cIpNetworkDiscoveryInfoGroup
- A Collection of objects for the IP networks discovered in the fabric and its associated gigabit ethernet interfaces details.
- cIpNetworkDiscoveryCfgGroup
- A Collection of objects to be configured, for doing the IP network discovery.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
