CISCO-ITP-GRT-MIB Download

cgrtRouteMaxDynamic

The maximum number of dynamic SS7 routes. This object is used to limit the size of the route table by preventing unbounded growth of dynamic entries. Dynamic entries are created when certain MTP3 management messages are received or sent. The removal of dy ...

cgrtDestNotifDelayTime

This object specifies the maximum amount of time to delay before generating the ciscoGrtDestStateChange notification. The delay is introduced to allow multiple destination state changes to be bundled into a single notification. If the value of this object ...

cgrtDestNotifWindowTime

This object specifies the time interval used to monitor the rate of destination state changes notifications. This object in combination with cgrtDestNotifMaxPerWindow is used to determine the notification transit rate and suppress destination state notif ...

cgrtDestNotifMaxPerWindow

This object specifies the maximum number of destination state changes that can occur in the time interval specified in the cgrtDestNotifWindowTime object. If additional state changes can occur in the specified time interval the notifications are suppresse ...

cgrtDestNotifEnabled

A control to enable or disable ciscoGrtDestStateChange notifications as follows: 'true' Indicates that the ciscoGrtDestStateChange notification should be generated when the state of any destination changes. That is, the notification generation is enabled ...

cgrtMgmtNotifDelayTime

This object specifies the maximum amount of time to delay before generating the ciscoGrtMgmtStateChange notification. The delay is introduced to allow multiple route state changes to be bundled into a single notification. If the value of this object is eq ...

cgrtMgmtNotifWindowTime

This object specifies the time interval used to monitor the rate of route state changes notifications. This object in combination with cgrtMgmtNotifMaxPerWindow is used to determine the notification transit rate and suppress route management state notifi ...

cgrtMgmtNotifMaxPerWindow

This object specifies the maximum number of route management state changes that can occur in the time interval specified in the cgrtMgmtNotifWindowTime object. If additional state changes can occur in the specified time interval the notifications are sup ...

cgrtMgmtNotifEnabled

A control to enable or disable ciscoGrtMgmtStateChange notifications as follows: 'true' Indicates that the ciscoGrtMgmtStateChange notification should be generated when the state of any route changes. That is, the notification generation is enabled. 'fal ...

cgrtRouteTableLoadNotifEnabled

A control to enable or disable ciscoGrtRouteTableLoad notifications as follows: 'true' Indicates that the ciscoGrtRouteTableLoad notification should be generated when the load operations is started or completed. That is, the notification generation is e ...

cgrtDynamicRoutes

The number of dynamic route entries created in response to MTP3 management messages. The maximum number for dynamic route entries is defined by the cgrtRouteMaxDynamic object. When a MTP3 management message is received and this limit is reached the requ ...

cgrtDynamicRoutesDropped

The number of dynamic route entries that could not be created because the limit specified by the cgrtRouteMaxDynamic object had been reached.

cgrtDestNotifWindowTimeRev1

This object specifies the time interval used to monitor the rate of destination state changes notifications. This object in combination with cgrtDestNotifMaxPerWindowRev1 is used to determine the notification transit rate and suppress destination state n ...

cgrtDestNotifMaxPerWindowRev1

This object specifies the maximum number of destination state changes that can occur in the time interval specified in the cgrtDestNotifWindowTimeRev1 object. If additional state changes do occur in the specified time interval the notifications are suppre ...

cgrtDestNotifEnabledRev1

A control to enable or disable ciscoGrtDestStateChangeRev1 notifications as follows: 'true' Indicates that the ciscoGrtDestStateChangeRev1 notification should be generated when the state of any destination changes. That is, the notification generation is ...

cgrtMgmtNotifWindowTimeRev1

This object specifies the time interval used to monitor the rate of route state changes notifications. This object in combination with cgrtMgmtNotifMaxPerWindowRev1 is used to determine the notification transit rate and suppress route management state no ...

cgrtMgmtNotifMaxPerWindowRev1

This object specifies the maximum number of route management state changes that can occur in the time interval specified in the cgrtMgmtNotifWindowTimeRev1 object. If additional state changes can occur in the specified time interval the notifications are ...

cgrtMgmtNotifEnabledRev1

A control to enable or disable ciscoGrtMgmtStateChangeRev1 notifications as follows: 'true' Indicates that the ciscoGrtMgmtStateChangeRev1 notification should be generated when the state of any route changes. That is, the notification generation is enabl ...

cgrtOrigTableEnabled

A control to enable or disable the support of optional cgrtOrigTable. 'true' Enables the OrigTable optional feature. 'false' Disables the OrigTable optional feature.

cgrtPCStatsInterval

This object indicates the allowed values for the statistics sampling interval. A value of zero is only valid for a single processor platform. For distributed platforms, the value in seconds specifies how often information on measurements will be refreshed ...

cgrtNoRouteMSUsNotifEnabled

A control to enable or disable ciscoGrtNoRouteMSUDiscards notifications as follows: 'true' Indicates that the ciscoGrtNoRouteMSUDiscards notification generation is enabled. 'false' Indicates that ciscoGrtNoRouteMSUDiscards notification generation is disa ...

cgrtNoRouteMSUsNotifWindowTime

This object specifies the time interval used to monitor the ciscoGrtNoRouteMSUDiscards notifications generated for a signalling point instance. The first occurrence of ciscoGrtNoRouteMSUDiscards notifications in this interval is sent and the further occu ...

cgrtInstTable

A route table exist per instance of signalling point. This table defines the routes defined for a particular instance.

cgrtInstEntry

A collection of route statements used to forward packets to requested destinations. Each table entry represents a route statement that was either configured or added in response to events in the network.

cgrtInstLastChanged

The value of sysUpTime at the time of the last creation or deletion of an entry in the route table defined for this signalling point. If the local network management subsystem is re-initialized, then this object contains the sysUpTime at the time when thi ...

cgrtInstLastLoadTime

The value of sysUpTime at the time of the last load of the route table using file format.

cgrtInstLoadStatus

The status of the current load or status from the prior load operation. This object will have a value of loadInProgress while the load operation is in progress. The cgrtInstLastLoadTime contains a timestamp indicating when the load operation is complete ...

cgrtInstTableName

The system generated name for the route table for this signalling point instance.

cgrtInstLastURL

The url used to load route table.

cgrtInstNumberDestinations

The number of destination in the cgrtDestTable Table.

cgrtInstNumberRoutes

The number of routes in the cgrtRouteTable Table.

cgrtInstUnknownOrigPCs

The number of MSUs with unknown origination point codes arrived to this signalling point instance. MSUs originated from local pointcode will not be counted as unknown OPCs.

cgrtInstNoRouteDrops

The number of MSUs dropped due to no corresponding entry in the destination table for this signalling point instance Q752/5.5.

cgrtDestTable

The destination table provides state information on the ability to route MTP packets to a particular destination point code.

cgrtDestEntry

Each table entry represents a specific destination point code(DPC).

cgrtDestStatus

List of the possible route state values. 'unknown' : A destination state of unknown occurs when the destination is a summary route. Unknown state is presented to indicate the protocols do not exchange state information for summary routes in certain ...

cgrtDestCongestion

The congestion status of this destination. The value indicates congestion on one or more links in one of the linksets used to route traffic to the signalling point specified by the cgrtRouteDpc object. 0 is the least congestion level, 3 is the highest co ...

cgrtDestAccessibleSeconds

Duration in seconds that this destination was in the accessible state.

cgrtDestInaccessibleSeconds

Duration in seconds that this destination was in the inaccessible state.

cgrtDestRestrictedSeconds

Duration in seconds that this destination was in the restricted state.

cgrtDestMSUsOut

The number of MSUs that were queued to linkset for transmission to this destination. Management MSUs that originate from this signalling point are also counted. It is important to note that, in rare cases, MSU discards due to any abnormal system resource ...

cgrtDestOctetsOut

The number of Octets in MSUs that were queued to linkset for transmission to this destination. It is important to note that, in rare cases, octets discarded due to any abnormal system resource error conditions may be included in this count.

cgrtDestMSUsIn

The number of MSUs that arrived to this signalling point bound for this destination. This includes the received as well as blocked MSUs.

cgrtDestOctetsIn

The number of Octets in MSUs that arrived to this signalling point bound for this destination.

cgrtDestInaccessibleDrops

The number of MSUs dropped for this destination due to inaccessible route state.

cgrtDestRestrictedMSUs

The number of MSUs transferred for this destination during a restricted route state.

cgrtDestCongestionDrops

The number of MSUs dropped for this destination due to local and remote congestion.

cgrtDestDisplay

The destination point code in display format.

cgrtRouteTable

The route table for determining the linkset that a packet must traverse to arrive at its destination given by the destination point code.

cgrtRouteEntry

Each table entry represents a configured route statement.

cgrtRouteDpc

The destination point code.

cgrtRouteMask

The mask used to define which part of cgrtRouteDpc is significant when comparing the cgrtRouteDpc to the destination code point in the packet to be routed.

cgrtRouteDestLsCost

The cost assigned to this linkset matching this route. Higher numbers represent higher cost.

cgrtRouteDestLinkset

The linkset that the packet is to be forwarded to on matching this route.

cgrtRouteQos

The quality of service classification to be assigned to the IP packets used to transport the SS7 messages. The value to specify for packets when they will be transported on SCTP/IP based linkset.

cgrtRouteStatus

List of the possible route status values. These values are determine using the status of the linkset specified in this route and the route management status. 'unknown' : Status can not be determined. 'available' : Route is available. 'restricted' ...

cgrtRouteMgmtStatus

List of the possible route management route status values. Route management status are received in transfer-allowed(TFA), transfer-prohibited(TFP), transfer-restricted(TFR), transfer-cluster-allowed(TCA), transfer-cluster-prohibited(TCP) and transfer-clu ...

cgrtRouteDynamic

Routes are either static or dynamic. Static routes are created based on configuration information specified by an administrator. Dynamic routes are created as a by product of an network event in certain situations. Dynamic routes are only created when s ...

cgrtRouteType

When summary or cluster routes are specified this field will provide additional information about the fully qualified routes within the specified clusters. Since, summary or cluster routes represent a group of destinations it is necessary to collect and ...

cgrtRouteAdminStatus

List of the possible administration route status values. 'none' : none. 'unknown' : Status can not be determined. 'available' : Route is available. 'restricted' : Traffic is restricted on route. 'unavailable' : Route is unable to service tra ...

cgrtRouteRowStatus

The object is used by a management station to create, modify or delete the row entry in cgspPointCodeTable following the RowStatus textual convention. The only object available for modification is the cgrtRouteAdminStatus object.

cgrtRouteAllowedSeconds

Duration in seconds during which forwarding was allowed for this route.

cgrtRouteRestrictedSeconds

Duration in seconds during which forwarding was restricted for this route.

cgrtRouteProhibitedSeconds

Duration in seconds during which forwarding was prohibited for this route.

cgrtRouteDisplay

The destination point code associated with the route in display format.

cgrtOrigTable

The origination table provides information on the incoming MTP packets from a particular origination point code.

cgrtOrigEntry

Each table entry represents a specific origination point code(OPC).

cgrtOrigPC

The origination point code.

cgrtOrigMSUs

The number of incoming MSUs from this origination.

cgrtOrigOctets

The number of incoming octets from this origination.

cgrtOrigDisplay

The origination point code associated with the table entry in display format.

cgrtDestSITable

The Destination Service Indicator table contains information about the number of MSUs and octets at the MTP3 transport layer for a specific destination and service indicator. The information is collected from both directions. This provides the granularity ...

cgrtDestSIEntry

Each table entry represents a specific destination point code(DPC) and Service Indicator(SI).

cgrtMtp3SI

The service indicator.

cgrtDestSIMSUsOut

The number of outgoing MSUs that were queued to linkset for transmission to this specific destination and service indicator. Management MSUs that originate from this signalling point are also counted. It is important to note that, in rare cases, MSU disca ...

cgrtDestSIOctetsOut

The number of outgoing octets that were queued to linkset for transmission to this specific destination and service indicator. It is important to note that, in rare cases, octets discarded due to any abnormal system resource error conditions may be includ ...

cgrtDestSIMSUsIn

The number of incoming MSUs for this specific destination and service indicator. This includes the received as well as blocked MSUs.

cgrtDestSIOctetsIn

The number of incoming octets for this specific destination and service indicator.

cgrtDestSIDisplay

The destination point code and service indicator associated with the table entry in display format.

cgrtOrigSITable

The Origination Service Indicator table contains information about the number of incoming MSUs and octets at the MTP3 transport layer from a specific origination and service indicator. This provides the granularity of information required by Q752 table 6 ...

cgrtOrigSIEntry

Each table entry represents a specific origination point code(OPC) and Service Indicator(SI).

cgrtOrigSIMSUs

The number of incoming MSUs for this specific origination and service indicator.

cgrtOrigSIOctets

The number of incoming MSUs for this specific origination and service indicator.

cgrtOrigSIDisplay

The origination point code and service indicator associated with the table entry in display format.

cgrtDestNotifSupFlag

A flag to indicate whether destination notifications notifications have been suppressed in the current time interval specified by the cgrtDestNotifWindowTime object. 'true' Indicates that the device has suppressed the sending of ciscoGrtDestStateChange n ...

cgrtDestNotifChanges

This object contains a list of destination state changes accumulated until the list is full or the time interval specified in cgrtDestNotifDelayTime has passed. It consists of one or more tuples packed together in the format of '......

cgrtMgmtNotifSupFlag

A flag to indicate whether management route notifications have been suppressed in the current time interval specified by the cgrtMgmtNotifWindowTime object. 'true' Indicates that the device has suppressed the sending of ciscoGrtDestStateChange notificati ...

cgrtMgmtNotifChanges

This object contains a list of management route state changes accumulated until the list is full or the time interval specified in cgrtMgmtNotifDelayTime has passed. It consists of one or more tuples packed together in the format of '......

cgrtDestNotifSuppressed

Number of ciscoGrtDestStateChangeRev1 notifications suppressed for the specific cgrtDestNotifWindowTimeRev1 duration.

cgrtRouteNotifSuppressed

Number of ciscoGrtMgmtStateChangeRev1 notifications suppressed for the specific cgrtRouteNotifWindowTimeRev1 duration.

cgrtNoRouteMSUsInterval

Duration elapsed since the start of cgrtNoRouteMSUsNotifWindowTime interval. This duration value can range from 0 upto cgrtNoRouteMSUsNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgrtNoRouteMSUs ...

cgrtIntervalNoRouteMSUs

Number of MSUs discarded due to routing data error in this specific cgspNoRouteMSUsInterval interval.

ciscoGrtInstGroup

SS7 route instance group.

ciscoGrtDestGroup

SS7 Destination group.

ciscoGrtRouteGroup

SS7 Route group.

ciscoGrtScalarsGroup

Scalars Group for Gateway Signalling Point Route Table.

ciscoGrtDestGroupRev1

SS7 Destination group.

ciscoGrtRouteGroupRev1

SS7 Route group.

ciscoGrtOrigGroup

SS7 Origination group.

ciscoGrtDestSIGroup

SS7 Destination and Service Indicator group.

ciscoGrtOrigSIGroup

SS7 Destination and Service Indicator group.

ciscoGrtInstGroupSup1

Additional Inst table objects.