CISCO-ITP-MLR-MIB Download

cmlrTableLoadNotifEnabled

A control to enable or disable ciscoMlrTableLoad notifications as follows: 'true' Indicates that the ciscoMlrTableLoad notification should be generated when the load operations is started or completed. That is, the notification generation is enabled. 'f ...

cmlrInstTable

A table that is used to provide information and measurements related to multi-layer routing per per signalling point.

cmlrInstTableEntry

Each entry in this table provides information on each signalling pointer supported by this device. Each entry provides information on modification to the configuration statements related to multi-layer routing and general measurements.

cmlrInstLastChanged

The value of sysUpTime at the time of the last creation or deletion of an entry in the Multi-Layer routing table defined for this signalling point. If the local network management subsystem is re-initialized, then this object contains the sysUpTime at the ...

cmlrInstLastLoadTime

The value of sysUpTime at the time of the last load of the Multi-Layer Routing table using file format for this signalling point.

cmlrInstLoadStatus

The status of the current load or status from the prior load operation. This object will have a value of loadInProgress while the load operation is in progress. The cmlrInstLastLoadTime contains a timestamp indicating when the load operation is complete ...

cmlrInstLastURL

The last URL used to load MLR table.

cmlrInstRoutedCounts

Count of the number of times a packet was routed by MLR. This value is incremented when packet is routed with result type of 'asname', 'gt', 'pc' or 'pcSsn'.

cmlrInstAbortCounts

Count of message signal units that could not be processed because of invalid data or were explicitly blocked as a result of MLR processing. The message signalling units will be discarded.

cmlrInstContinueCounts

Count of message signal units that were passed back to normal SCCP processing.

cmlrInstSmsMoCounts

Count of message signal units with operation type GSM-MAP SMS-MO.

cmlrInstSmsMtCounts

Count of message signal units with operation type GSM-MAP SMS-MT.

cmlrInstSriSmCounts

Count of message signal units with operation type GSM-MAP SRI-SM.

cmlrInstSmdPpCounts

Count of message signal units with operation type ANSI-41 SMD-PP.

cmlrInstAlertScCounts

Count of message signal units with operation type GSM-MAP AlertSC.

cmlrInstSmsRequestCounts

Count of message signal units with operation type ANSI-41 SMSRequest.

cmlrInstSmsNotifCounts

Count of message signal units with operation type ANSI-41 SMSNotification.

cmlrInstUnsupSCCPmsgTypeCounts

Count of message signal units received with unsupported SCCP message type. This object counts are also included in the cmlrInstContinueCounts object.

cmlrInstUnsupSegSCCPmsgCounts

Count of message signal units received with unsupported segmented SCCP message. This object counts are also included in the cmlrInstContinueCounts object.

cmlrInstUnsupportedMsgCounts

Count of message signal units received that could not be processed because the messages contained an unsupported command type or contents of messages was unsupported. This object counts are also included in the cmlrInstContinueCounts object.

cmlrInstParsingErrorCounts

Count of message signal units received that could not be processed because of a parsing error. This object counts are also included in the cmlrInstContinueCounts object.

cmlrInstNoResultCounts

Count of message signal units received that matched a trigger or rule that did not specify a result. This object counts are also included in the cmlrInstContinueCounts object.

cmlrInstResultContinueCounts

Count of message signal units received that matched a trigger or rule that specified continue for the result. This object counts are also included in the cmlrInstContinueCounts object.

cmlrInstNoServerDiscardCounts

Count of message signal units received that matched a trigger or rule that specified a result or result group directing MSU to application server. However, the application server was unavailable. This object counts are also included in the cmlrInstAbortC ...

cmlrInstResultGttCounts

Count of message signal units received that matched a trigger or rule that specified GTT for the result. This object counts are also included in the cmlrInstContinueCounts object. ::= { cmlrInstTableEntry 22 } SYNTAX Counter32 UNIT ...

cmlrInstResultBlockCounts

Count of message signal units received that matched a trigger or rule that specified a result of block. This object counts are also included in the cmlrInstAbortCounts object.

cmlrInstGTImismatchCounts

Count of message signal units received that could not be routed because of mis-match between GTI values. This object counts are also included in the cmlrInstAbortCounts object.

cmlrInstAddrConvFailureCounts

Count of message signal units received that could not be routed because GTT address failed to convert. This object counts are also included in the cmlrInstAbortCounts object.

cmlrInstDestUnavailableCounts

Count of message signal units received that specified a result PC or PC and SSN and the destination point-code was unavailable. This object counts are also included in the cmlrInstAbortCounts object.

cmlrInstFailedTrigMatchCounts

Count of message signal units received that was processed and failed to mathc any trigger. This can occur when a primary trigger specifies secondary triggers and they fail to match. This object counts are also included in the cmlrInstContinueCounts object ...

cmlrInstDiscontinuityTime

The value of sysUpTime on the most recent occasion at which the configuration was modified in such a way to force a discontinuity. All counters under this instance in the following tables will be reset when configuration is replaced. - cmlrTriggerTable - ...

cmlrInstNoServerContinueCounts

Count of message signal units received that matched a trigger or rule that specified a result or result group directing MSU to application server. However, the application server was unavailable. This object counts are also included in the cmlrInstContin ...

cmlrInstResultAsCounts

Count of message signal units received that matched a trigger or rule that specified result type of Application server. This object counts are also included in the cmlrInstRoutedCounts object.

cmlrInstResultPcCounts

Count of message signal units received that matched a trigger or rule that specified result type Pointcode. This object counts are also included in the cmlrInstRoutedCounts object.

cmlrInstResultPcSsnCounts

Count of message signal units received that matched a trigger or rule that specified pointcode and subsystem number. This object counts are also included in the cmlrInstRoutedCounts object.

cmlrTriggerTable

A table that is used to configure specific routing keys to act as trigger for multi-layer routing. Entries are added to this table via cmlrTriggerRowStatus in accordance with the RowStatus convention.

cmlrTriggerTableEntry

Each entry define a trigger to be used to perform non-standard routing of message signalling units. Each trigger entry contains information used to select traffic for further processing. Therefore, the information used to activate trigger must be unique. ...

cmlrTableName

A name used to define a collection of multi-layer routing statements.

cmlrTriggerNumber

This object specifies the index for a list of triggers specified per routing table.

cmlrTriggerParameters

The following options define the source and processing of triggers. 'block' : Indicates that message signal units will be dropped when they match the specified trigger. When sub-trigger(secondary triggers) exist the option will be ignored. 'continue' : ...

cmlrTriggerGt

The global title address to be matched when either the 'cdpa' or 'cgpa' bits are set in the cmlrTriggerParameters object. This object will return a string of zero length when the cmlrTriggerParameters 'pc' bit is set.

cmlrTriggerTransType

The translation type specified within the address in the message signal unit. This object will default to value based on variant unless the 'tt' bit is set in cmlrTriggerParameters object.

cmlrTriggerGti

The global title indicator value for the global tile address specified within the message signal unit. This object will default to value based on variant unless the 'gti' bit is set in cmlrTriggerParameters object.

cmlrTriggerNp

The numbering plan of the specified global title address. This object will default to value based on variant unless the 'np' bit is set in cmlrTriggerParameters object.

cmlrTriggerNai

Nature of Address Indicator (NAI) for GTT Selector. This object will default to value based on variant unless the 'nai' bit is set in cmlrTriggerParameters object.

cmlrTriggerPc

The point-code in variant-specific format. This object only has meaning when the 'pc' bit is set in the cmlrTriggerParameters object.

cmlrTriggerSsn

The subsystem number to be matched when the when the 'pc' bit is set in the cmlrTriggerParameters object.

cmlrTriggerDpc

The destination MTP3 point-code to be matched when the when the 'dpc' bit is set in the cmlrTriggerParameters object.

cmlrTriggerOpc

The origination MTP3 point-code to be matched when the when the 'opc' bit is set in the cmlrTriggerParameters object.

cmlrTriggerOpcMask

The origination MTP3 point-code mask to be applied in combination with cmlrTriggerOpc object. The mask will be applied when 'opcMask' bit is set in the cmlrTriggerParameters object.

cmlrTriggerSi

The Service Indicator to be matched when the when the 'si' bit is set in the cmlrTriggerParameters object.

cmlrTriggerNetwork

The network name is used to indicate the network in which the ruleset will be invoked. This object only has meaning when the 'network' bit is set in the cmlrTriggerParameters object.

cmlrTriggerRuleset

Specifies the ruleset table that should be used if the trigger is matched and not overruled by a secondary trigger ruleset. This object only has meaning when the 'ruleset' bit is set in the cmlrTriggerParameters object.

cmlrTriggerActive

This object indicates whether this trigger is active. The trigger will be active when the corresponding GTA entry exists and has been linked to trigger. 'true' - Trigger is active and will be processed. 'false' - Trigger is inactive and will not be proce ...

cmlrTriggerStartDateAndTime

The local date and time when this trigger and sub-triggers will become active. When all bytes of octet string are set to zero then cmlrInstStartDateAndTime does not apply.

cmlrTriggerEndDateAndTime

The local date and time this trigger and sub-triggers will become inactive. When all bytes of octet string are set to zero then cmlrInstEndDateAndTime does not apply.

cmlTriggerPreliminaryMatchCounts

This counter indicates that a packet has matched the contents of the primary trigger. This counter indicates which triggers are causing packets to be processed by multi-layer routing. Whether the trigger is fully matched will be indicated by the cmlrTr ...

cmlrTriggerMatchCounts

This counter indicates that a packet has matched the trigger and the result action was performed. When a primary trigger has secondary triggers this counter indicates that the primary matched and at least one of the secondary triggers matched.

cmlrTriggerRowStatus

The object is used by a management station to create or delete the row entry in cmlrTriggerTable following the RowStatus textual convention.

cmlrSubTriggerTable

A table that is used to define additional triggers that work in combination with values specified in specific cmlrTriggerTable. Entries are added to this table via cmlrSubTriggerRowStatus in accordance with the RowStatus convention.

cmlrSubTriggerTableEntry

Each entry in the cmlrSubTriggerTable works in conjunction with a entry in cmlrTriggerTable. The trigger address specified in cmlrSubTriggerTable is a secondary address and both the primary address in the cmlrTriggerTable and the secondary address must ma ...

cmlrSubTriggerNumber

This object specifies the index for a list of secondary triggers specified per primary trigger.

cmlrSubTriggerParameters

The following options define the source and processing of sub-triggers(secondary trigger). 'block' : Indicates that message signal units will be dropped when they match the specified secondary trigger. 'continue' : Indicates that message signal units wi ...

cmlrSubTriggerGt

The global title address to be matched when either the 'cdpa' or 'cgpa' bits are set in the cmlrSubTriggerParameters object. This object will return a string of zero length when the cmlrSubTriggerParameters 'pc' bit is set.

cmlrSubTriggerTransType

The translation type specified within the address in the message signal unit. This object will default to value based on variant unless the 'tt' bit is set in cmlrSubTriggerParameters object.

cmlrSubTriggerGti

The global title indicator value for the global tile address specified within the message signal unit. This object will default to value based on variant unless the 'gti' bit is set in cmlrSubTriggerParameters object.

cmlrSubTriggerNp

The numbering plan of the specified global title address. This object will default to value based on variant unless the 'np' bit is set in cmlrSubTriggerParameters object.

cmlrSubTriggerNai

The nature of specified address. This object will default to value based on variant unless the 'nai' bit is set in cmlrSubTriggerParameters object.

cmlrSubTriggerPc

The point-code in variant-specific format. This object only has meaning when the 'pc' bit is set in the cmlrSubTriggerParameters object.

cmlrSubTriggerSsn

The subsystem number to be matched when the when the 'pc' bit is set in the cmlrSubTriggerParameters object.

cmlrSubTriggerNetwork

The network name is used to indicate the network in which the ruleset will be invoked. This object only has meaning when the 'network' bit is set in the cmlrSubTriggerParameters object.

cmlrSubTriggerRuleset

Specifies the ruleset table that should be used if the trigger is matched and not overruled by a secondary trigger ruleset. This object only has meaning when the 'ruleset' bit is set in the cmlrSubTriggerParameters object.

cmlrSubTriggerMatchCounts

Count of the number of times secondary trigger was matched.

cmlrSubTriggerRowStatus

The object is used by a management station to create or delete the row entry in cmlrSubTriggerTable following the RowStatus textual convention.

cmlrAddressTable

A table used to create a collection of addresses that can be searched for exact or best matches. Entries are added to this table via cmlrAddressRowStatus in accordance with the RowStatus convention.

cmlrAddressTableEntry

Each entry in the cmlrAddressTable is used to search for matches within a messages signalling unit. Message signalling that match a particular rule can be directed to cmlrAddressTable to allow MSU to be directed or modified based on address information. T ...

cmlrAddressTableName

A name used to define a collection of addresses used to route and modify messages signalling units.

cmlrAddressType

The type of addresses in the address tables. The different types will be used to determine how to format and convert cmlrAddressDigits.

cmlrAddressDigits

The digits of the address in following formats as indicated by cmlrAddressType object. 'hexadecimal' - The digits are hexadecimal digits specified in ASCII as follows. '0123456789ABCDEF'

cmlrAddressExactMatch

This object indicates that the address specified by cmlrAddressDigits object must exactly match value in message signalling unit. 'true' - Exact match is specified. 'false' - Best match is specified.

cmlrAddressResultParameters

Many of the result parameter used in the processing of address table have default values. These values are determined by a combination of variant and operation type. This object will be provide information which parameter used in setting results have bee ...

cmlrAddressResultNetwork

The network name is used to indicate the network in which the result operation will be performed.

cmlrAddressResultType

Specified the type of information to be placed into the message signal unit or how the it will be processed.

cmlrAddressResultOctet

Information to be placed in the message signal unit based on the value specified by the cmlrAddressSetResultType object. When the cmlrAddressSetResultType object is set to 'pc' or 'none' this object will not be used in the result processing and will have ...

cmlrAddressResultTransType

The translation type specified within the address in the message signal unit. This object only applies when the cmlrAddressSetResultType is set to 'gt' value.

cmlrAddressResultGti

The global title indicator value for the global tile address specified within the message signal unit. This object only applies when the cmlrAddressSetResultType is set to 'gt' value.

cmlrAddressResultNp

The numbering plan for the global tile address specified within the message signal unit. This object only applies when the cmlrAddressSetResultType is set to 'gt' value.

cmlrAddressResultNai

The nature of specified address for the global tile address specified within the message signal unit. This object only applies when the cmlrAddressSetResultType is set to 'gt' value.

cmlrAddressResultPc

The point-code to be place in the message signal unit. This object only applies when the cmlrAddressResultType is set to 'pc' value.

cmlrAddressResultSsn

The subsystem number to be place in the message signal unit. This object only applies when the cmlrAddressResultType is set to 'ssn' value.

cmlrAddressMatchCounts

Count of the number of times address was matched. This counter is only incremented when rule matches.

cmlrAddressRowStatus

The object is used by a management station to create or delete the row entry in cmlrAddressTable following the RowStatus textual convention.

cmlrRuleSetTable

A table that is used to specify attributes of an application-layer message to be matched and the resulting behavior for handling the message. Entries are added to this table via cmlrRuleSetRowStatus in accordance with the RowStatus convention.

cmlrRuleSetTableEntry

Each entry in this table represents a set of addresses used to perform non-standard routing of messages signalling units..

cmlrRuleSetName

A name used to define a set rules used to transform traffic.

cmlrRuleSetSegmented

This object indicates whether segmented messages will be processed by rules contained in this ruleset. 'true' - Segmented messages will be processed. 'false' - Segmented messages will not be processed.

cmlrRuleSetProtocol

The object is used to establish a default protocol type for all rules within the rule set. If this object is set to 'none' will default to protocol specified by variant.

cmlrRuleSetSearchType

Defines how the rules with the ruleset will be search as follows. 'seq' : Rules will be processed in ascending order based on the value of the cmlrRuleNumber object 'bestMatch' : Rules will be processed using a combination of operation and order number ...

cmlrRuleSetStartDateAndTime

The local date and time when this trigger and sub-triggers will become active. When the value is null then the cmlrInstStartDateAndTime does not apply.

cmlrRuleSetEndDateAndTime

The local date and time this trigger and sub-triggers will become inactive. When the value is null then the cmlrInstEndDateAndTime does not apply.

cmlrRuleSetRowStatus

The object is used by a management station to create or delete the row entry in cmlrRuleSetTable following the RowStatus textual convention.

cmlrRuleTable

A table that is used to specify attributes of an application-layer message to be matched and the resulting behavior for handling the message. Entries are added to this table via cmlrRuleRowStatus in accordance with the RowStatus convention.

cmlrRuleTableEntry

Entries in this table are searched in the specified order defined but cmlrRuleNumber object ----------------------------------- | operation | ANSI-41 | GSP-MAP | -----------------------------------| | alertsc | | X | | smdpp | ...

cmlrRuleOperationType

The list of possible operation types. 'unknown' : undefined operation type. 'alertSc' : Used to identify AlertServiceCenter request messages in GSM MAP. 'smdPp' : Used to identify SMS DeliveryPointToPoint request messages for the GSM MAP and AN ...

cmlrRuleProtocol

Protocol used to examine message. 'none' : Will use protocol specified in cmlrRuleSetProtocol object. 'gsmMap' : Global system for mobile communications Mobile Application Part operations should be matched by this rule. 'is41' : Indicates that only AN ...

cmlrRuleInputParameters

Many of the parameter used in the processing of rules have default values. These values are determined by a combination of variant and operation type. This object will be provide information which parameter has been specified as follows. 'destPort' : ...

cmlrRuleDestPort

A destination application port number. The value of the port number maps to the values specified in the User Data Header (UDH) of the SMS message. This object only applies when the 'destPort' bit is set in the cmlrRuleInputParameters object.

cmlrRuleDestSmeGta

The destination short message entity global title address. When the length of the global title address is zero it specified a wildcard match and all global title will match GTA clause of rule. This object only applies when the 'destSmeGta' bit is set in t ...

cmlrRuleDestSmeNai

The nature of specified address for the destination short message entity global title address specified within the message signal unit. This object only applies when the 'destSmeNai' bit is set in the cmlrRuleInputParameters object.

cmlrRuleDestSmeNp

The numbering plan for the destination short message entity global title address specified within the message signal unit. This object only applies when the 'destSmeNp' bit is set in the cmlrRuleInputParameters object.

cmlrRuleDestSmscGta

The destination short message service center global title address. When the length of the global title address is zero it specified a wildcard match and all global title will match GTA clause of rule. This object only applies when the 'destSmscGta' bit is ...

cmlrRuleDestSmscNai

The nature of specified address for the destination short message service center global title address specified within the message signal unit. This object only applies when the 'destSmscNai' bit is set in the cmlrRuleInputParameters object.

cmlrRuleDestSmscNp

The numbering plan for the destination short message service center global title address specified within the message signal unit. This object only applies when the 'destSmscNp' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmeGta

The origination short message entity global title address. When the length of the global title address is zero it specified a wildcard match and all global title will match GTA clause of rule. This object only applies when the 'origSmeGta' bit is set in t ...

cmlrRuleOrigSmeNai

The nature of specified address for the origination short message entity global title address specified within the message signal unit. This object only applies when the 'origSmeNai' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmeNp

The numbering plan for the origination short message entity global title address specified within the message signal unit. This object only applies when the 'origSmeNp' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmscGta

The origination short message service center global title address. When the length of the global title address is zero it specified a wildcard match and all global title will match GTA clause of rule. This object only applies when the 'origSmscGta' bit is ...

cmlrRuleOrigSmscNai

The nature of specified address for the origination short message service center global title address specified within the message signal unit. This object only applies when the 'origSmscNai' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmscNp

The numbering plan for the origination short message service center global title address specified within the message signal unit. This object only applies when the 'origSmscNp' bit is set in the cmlrRuleInputParameters object.

cmlrRuleProtocolId

The protocol identifier value used for the 'smsMo and 'smsMt' operations specified by the cmlrRuleParmsOperationType object. The value of the cmlrRuleParmsMatchPid object maps to the values specified for the TP-PID SMS parameter. This object only applies ...

cmlrRuleTeleserviceId

The Teleservice identifier value for the following types of operations specified by the cmlrRuleParmsOperationType object. 'smdPp' 'smsMo' 'smsMt' 'smsNotify' The value of the cmlrRuleParmsMatchTid object maps to the values specified for the SMS_Teleserv ...

cmlrRuleAddressTable

The name of the entry in the cmlrAddressTable that will be searched for matches. The table will be search for the following types of addresses based on values set in the cmlrRuleInputParameters object. This object only applies when the 'destSmeTable' bit ...

cmlrRuleResultParameters

Many of the parameter used in the processing of rules have default values. These values are determined by a combination of variant and operation type. This object will be provide information on which parameter have been specified as follows. 'network' ...

cmlrRuleResultNetwork

The network name is used to indicate the network in which the result operation will be performed.

cmlrRuleResultType

Specified the type of information to be placed into the message signal unit or how the it will be processed.

cmlrRuleResultOctet

Information to be placed in the message signal unit based on the value specified by the cmlrRuleSetResultType object. When the cmlrRuleSetResultType object is set to 'pc' or 'none' this object will not be used in the result processing and will have a len ...

cmlrRuleResultTransType

The translation type specified within the address in the message signal unit. This object only applies when the cmlrRuleSetResultType is set to 'gt' value.

cmlrRuleResultGti

The global title indicator value for the global tile address specified within the message signal unit. This object only applies when the cmlrRuleSetResultType is set to 'gt' value.

cmlrRuleResultNp

The numbering plan for the global tile address specified within the message signal unit. This object only applies when the cmlrRuleSetResultType is set to 'gt' value.

cmlrRuleResultNai

The nature of specified address for the global tile address specified within the message signal unit. This object only applies when the cmlrRuleSetResultType is set to 'gt' value.

cmlrRuleResultPc

The point-code to be place in the message signal unit. This object only applies when the cmlrRuleResultType is set to 'pc' value.

cmlrRuleResultSsn

The subsytem number to be place in the message signal unit. This object only applies when the cmlrRuleResultType is set to 'ssn' value.

cmlrRuleMatchCounts

Count of the number of times this rule was matched.

cmlrRuleRowStatus

The object is used by a management station to create or delete the row entry in cmlrRuleTable following the RowStatus textual convention.

cmlrRuleOrigAddressTable

The name of the entry in the cmlrAddressTable that will be searched for matches. The table will be search for the following types of addresses based on values set in the cmlrRuleInputParameters object. This object only applies when the 'origSmeTable' bit ...

cmlrRuleDestSmeMinDigits

Specifies the minimum number of digits that the global title address specified by the cmlrRuleDestSmeGta object can contain for rule to match. This object only applies when the 'destSmeMinDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleDestSmeMaxDigits

Specifies the maximum number of digits that the global title address specified by the cmlrRuleDestSmeGta object can contain for rule to match. This object only applies when the 'destSmeMaxDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleDestSmeTableNai

The nature of specified address for the global tile address specified within the message signal unit. This object only applies when the 'destSmeTableNai' bit is set in the cmlrRuleInputParameters object. When operation type, cmlrRuleOperationType is 'sms ...

cmlrRuleDestSmeTableNp

The numbering plan for the destination short message service center global title address specified within the message signal unit. This object only applies when the 'destSmeTableNp' bit is set in the cmlrRuleInputParameters object. When operation type, cm ...

cmlrRuleDestSmscMinDigits

Specifies the minimum number of digits that the global title address specified by the cmlrRuleDestSmscGta object can contain for rule to match. This object only applies when the 'destSmscMinDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleDestSmscMaxDigits

Specifies the maximum number of digits that the global title address specified by the cmlrRuleDestSmscGta object can contain for rule to match. This object only applies when the 'destSmscMaxDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmeMinDigits

Specifies the minimum number of digits that the global title address specified by the cmlrRuleOrigSmeGta object can contain for rule to match. This object only applies when the 'origSmeMinDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmeMaxDigits

Specifies the maximum number of digits that the global title address specified by the cmlrRuleOrigSmeGta can contain for rule to match. This object only applies when the 'origSmeMaxDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmeTableNai

The nature of specified address for the global tile address specified within the message signal unit. This object only applies when the 'origSmeTableNai' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmeTableNp

The numbering plan for the destination short message service center global title address specified within the message signal unit. This object only applies when the 'origSmeTableNp' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigImsiGta

The origination short message entity global title address. When the length of the global title address is zero it specified a wildcard match and all global title will match GTA clause of rule. This object only applies when the 'origImsiGta' bit is set in ...

cmlrRuleOrigImsiNai

The nature of specified address for the origination short message entity global title address specified within the message signal unit. This object only applies when the 'origImsiNai' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigImsiNp

The numbering plan for the origination short message entity global title address specified within the message signal unit. This object only applies when the 'origImsiNp' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigImsiMinDigits

Specifies the minimum number of digits that the global title address specified by the cmlrRuleOrigImsiGta object can contain for rule to match. This object only applies when the 'origImsiMinDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigImsiMaxDigits

Specifies the maximum number of digits that the global title address specified by the cmlrRuleOrigImsiGta object can contain for rule to match. This object only applies when the 'origImsiMaxDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigImsiTable

The name of the entry in the cmlrAddressTable that will be searched for matches. The table will be search for the following types of addresses based on values set in the cmlrRuleInputParameters object. This object only applies when the 'origImsiTable' bi ...

cmlrRuleOrigSmscMinDigits

Specifies the minimum number of digits that the global title address specified by the cmlrRuleOrigSmscGta object can contain for rule to match. This object only applies when the 'origSmscMinDigits' bit is set in the cmlrRuleInputParameters object.

cmlrRuleOrigSmscMaxDigits

Specifies the maximum number of digits that the global title address specified by the cmlrRuleOrigSmscGta object can contain for rule to match. This object only applies when the 'origSmscMaxDigits' bit is set in the cmlrRuleInputParameters object.

cmlrResultSetTable

A table used to identify a group of results and define parameter that apply to all result within the group. Entries are added to this table via cmlrResultSetRowStatus object in accordance with the RowStatus convention.

cmlrResultSetTableEntry

This table is used to define a collection of results.

cmlrResultSetName

A name used to define a result group.

cmlrResultSetUnavailDiscard

When all results in a group are unavailable this object defines whether to discard packet or to return packet to SCCP layer for normal processing. 'true' Packet will be discarded. 'false' Packet will be returned to SCCP layer for normal processing.

cmlrResultSetRowStatus

The object is used by a management station to create or delete the row entry in cmlrResultSetTable following the RowStatus textual convention.

cmlrResultTable

A table used to identify a group of destination resources The result group lists the appropriate destination resources, and the mechanism used to select a single destination for a given packet. State information is determined for each possible destinatio ...

cmlrResultTableEntry

This table is used to define a collection of multi-layer routing statements.

cmlrResultNumber

This object specifies the index for a list of results specified per result group.

cmlrResultType

Result type used to route MSU.

cmlrResultNetwork

The network name is used to indicate the network in which the result parameters exist.

cmlrResultOctet

Specified the information used to route the MSU based on cmlrResultType object.

cmlrResultPc

A destination point code that must exist in the MTP3 routing table, and its state is extracted from MTP3 for availability purposes. This object only has applies when the cmlrResultType has the 'pc' value. Otherwise, this object will return zero value.

cmlrResultSsn

The subsystem number to be inserted into MSU. This object only has applies when the cmlrResultType has the 'pcSsn' value. Otherwise, this object will return zero value.

cmlrResultWeight

This object specifies the weight applied to the weighted round robin distribution algorithm used for multi-layer result group. An integer value in the range of 0 to 10. A value of ten indicates the resource should be selected ten times more than a resour ...

cmlrResultCounts

Number of times this entry was invoked.

cmlrResultRowStatus

The object is used by a management station to create or delete the row entry in cmlrResultsTable following the RowStatus textual convention.

ciscoMlrTableGroup

A collection of objects providing Mult-layer routing feature.

ciscoMlrTriggerGroup

A collection of objects related to Multi-layer triggers.

ciscoMlrAddressGroup

A collection of objects related to Multi-layer Addresses.

ciscoMlrRuleSetGroup

A collection of objects related to Multi-layer rule sets.

ciscoMlrResultGroup

A collection of objects providing Multi-layer results feature.

ciscoMlrRuleSetGroupRev1

A collection of objects related to Multi-layer rule sets.

ciscoMlrRuleSetGroupRev2

A collection of objects related to Multi-layer rule sets.