CISCO-ITP-SCCP-MIB Download
The MIB for Signaling Connection Control Part(SCCP)
messages transported over Signalling System
No. 7 (SS7) Network via Cisco IP Transfer
Point.
This MIB for provides information specified
in ITU Q752 Monitoring and Measurements for
Signalling System No. 7(SS7) Network.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signaling point.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-ITP-SCCP-MIB
- cItpSccpTotalMsgs
- This counter is incremented every time a message is handled from a local or remote subsystem(Q752/9.3).
- cItpSccpLocalMsgs
- This counter is incremented every time a message is handled from a local subsystem(Q752/9.4).
- cItpSccpTotalGttMsgs
- This counter is incremented every time a message requiring global title translation (Q752/9.5) is handled.
- cItpSccpUDTMsgsSent
- This counter is incremented every time a unitdata (UDT) message is sent (Q752/9 bis.1).
- cItpSccpUDTSMsgsSent
- This counter is incremented every time a unitdata service (UDTS) message is sent (Q752/9 bis.2).
- cItpSccpUDTMsgsRcvd
- This counter is incremented every time a unitdata (UDT) message is received (Q752/9 bis.3).
- cItpSccpUDTSMsgsRcvd
- This counter is incremented every time a unitdata service (UDTS) message is received (Q752/9 bis.4).
- cItpSccpXUDTMsgsSent
- This counter is incremented every time a extended unitdata (XUDT) message is sent (Q752/9 bis.13).
- cItpSccpXUDTSMsgsSent
- This counter is incremented every time a extended unitdata service (XUDTS) message is sent (Q752/9 bis.14).
- cItpSccpXUDTMsgsRcvd
- This counter is incremented every time a extended unitdata (XUDT) message is received (Q752/9 bis.15).
- cItpSccpXUDTSMsgsRcvd
- This counter is incremented every time a extended unitdata service (XUDTS) message is received (Q752/9 bis.16).
- cItpSccpLUDTMsgsSent
- This counter is incremented every time a long unitdata (LUDT) message is sent (Q752/9 bis.17).
- cItpSccpLUDTSMsgsSent
- This counter is incremented every time a long unitdata (LUDT) service message is sent (Q752/9 bis.18).
- cItpSccpLUDTMsgsRcvd
- This counter is incremented every time a long unitdata (LUDT) message is received (Q752/9 bis.19).
- cItpSccpLUDTSMsgsRcvd
- This counter is incremented every time a long unitdata (LUDT) service message is received (Q752/9 bis.20).
- cItpSccpCrToMtp
- This counter is incremented every time a Connection Request(CR) messages sent to MTP. This count include ISDN-UP with embedded CRs (Q752/9 bis.5).
- cItpSccpCrefToMtp
- This counter is incremented every time a Connection Refusal (CREF) message is sent to MTP (Q752/9 bis.6).
- cItpSccpCrFromMtp
- This counter is incremented every time a Connection Reguest messages received from MTP. This count inlcudes ISDN- UP with embedded CRs (Q752/9 bis.7).
- cItpSccpCrefFromMtp
- This counter is incremented every time a Connection Refusal (CREF) message is received from MTP (Q752/9 bis.8).
- cItpSccpRsrToMtp
- This counter is incremented every time a Reset Request (RSR) message is sent to MTP (Q752/9 bis.9).
- cItpSccpRsrFromMtp
- This counter is incremented every time a Reset Request (RSR) message is received from MTP (Q752/9 bis.10).
- cItpSccpErrToMtp
- This counter is incremented every time a Error Message (ERR) message is sent to MTP (Q752/9 bis.11).
- cItpSccpErrFromMtp
- This counter is incremented every time a Error Message (ERR) message is received from MTP (Q752/9 bis.12).
- cItpSccpCpcConfigLastChanged
- The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttConPcTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This valu ...
- cItpSccpMapConfigLastChanged
- The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttMapTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value ...
- cItpSccpSelConfigLastChanged
- The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttSelTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value ...
- cItpSccpGtaConfigLastChanged
- The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttGtaTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value ...
- cItpSccpAppConfigLastChanged
- The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttAppTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value ...
- cItpSccpGttMapStateNotifEnabled
- The SP linkset notification truth value. 'true' Indicates that the cItpSccpGttMapStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that the cItpSccpGttMapStateChange not ...
- cItpSccpPrefConfigLastChanged
- The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttPrefTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value ...
- cItpSccpGttConfigLoad
- The value of sysUpTime at the time of the last load of the GTT table using file format.
- cItpSccpGttConfigLoadStatus
- The status of the deprecatedload or status from the prior load operation.
- cItpSccpGttConPcTable
- A table of concerned point codes.
- cItpSccpGttConPcTableEntry
- A list of concerned point codes.
- cItpSccpGttConPcListName
- The name of the Concerned Point Code list.
- cItpSccpGttConPointCode
- The concerned point code for SCCP GTT.
- cItpSccpGttConPcRefCount
- The reference count for this list.
- cItpSccpGttMapTable
- A table of SCCP GTT Mated Application (MAP) entries.
- cItpSccpGttMapTableEntry
- A list of SCCP GTT MAP attributes.
- cItpSccpGttMapPc
- The point code for GTT MAP entry.
- cItpSccpGttMapSsn
- The subsystem number (SSN) for GTT MAP entry.
- cItpSccpGttMapDisplayPC
- The MAP point code in display format.
- cItpSccpGttMapDisplaySS
- The MAP subsystem number in display format.
- cItpSccpGttMapType
- The GTT MAP subsystem type.
- cItpSccpGttMapPcStatus
- The GTT MAP point code status.
- cItpSccpGttMapSsStatus
- The GTT MAP subsystem status.
- cItpSccpGttMapMultInd
- The GTT mated application multiplicity indicator.
- cItpSccpGttMapBackupPc
- The backup point code for the mated Application.
- cItpSccpGttMapBackupSsn
- The backup subsystem number for the mated Application.
- cItpSccpGttMapConPcList
- The concerned point code list for the mated Application.
- cItpSccpGttMapReRouteOnCong
- The GTT Mated App re-route on congestion truth value. 'true' Re-routing on congestion is enabled. 'false' Re-routing on congestion is disabled.
- cItpSccpGttMapAdjacent
- The GTT Mated App Point Code adjacent truth value. 'true' Indicates that MAP PC is adjacent. 'false' Indicates that MAP PC is not adjacent.
- cItpSccpGttMapLastSsUsed
- The GTT MAP last subsystem used truth value. 'true' It is the last used subsystem. 'false' It is not the last used subsystem.
- cItpSccpGttMapUsed
- This counter is incremented every time a message is routed by the GTT Mated Application.
- cItpSccpGttMapAltUsed
- This counter is incremented every time a message is re-routed on congestion by the GTT Mated Application.
- cItpSccpGttMapSccpUnavail
- This counter is incremented every time a SCCP is unavailable at the GTT Mated Application.
- cItpSccpGttMapPcUnavail
- This counter is incremented every time a point code is unavailable at the GTT Mated Application.
- cItpSccpGttMapSsUnavail
- This counter is incremented every time a subsystem is unavailable at the GTT Mated Application.
- cItpSccpGttMapPcCongested
- This counter is incremented every time a point code is congested at the GTT Mated Application.
- cItpSccpGttMapSsCongested
- This counter is incremented every time a subsystem is congested at the GTT Mated Application.
- cItpSccpGttMapMtp3Fail
- This counter is incremented every time a the MTP3 layer failed at the GTT Mated Application.
- cItpSccpGttMapRefCount
- The reference count for this MAP entry.
- cItpSccpGttMapCongStatus
- The status of congestion level for this MAP point code.
- cItpSccpGttSelTable
- A table of SCCP GTT Selector entries.
- cItpSccpGttSelTableEntry
- A list of SCCP GTT Selector attributes.
- cItpSccpGttSelTT
- Translation Type (TT) for this GTT Selector.
- cItpSccpGttSelNAI
- Nature of Address Indicator (NAI) for GTT Selector.
- cItpSccpGttSelNP
- Numbering Plan (NP) for this GTT Selector.
- cItpSccpGttSelGTI
- Global Title Indicator (GTI) for this GTT Selector.
- cItpSccpGttSelName
- The name of the GTT selector.
- cItpSccpGttSelNumPerf
- This counter is incremented every time a global title translations is performed using this GTT Selector.
- cItpSccpGttSelNotFound
- This counter is incremented every time a global title title translations was required and a selector was not found.
- cItpSccpGttSelQOS
- The SCCP GTT Selector specifies the QOS.
- cItpSccpGttSelRefCount
- The reference count for this GTT Selector.
- cItpSccpGttPrePrefConv
- The Prefix Conversion Table is used to convert GTA digits. This object specifies that the conversion occurs 'before' global title translation.
- cItpSccpGttPostPrefConv
- The Prefix Conversion Table is used to convert GTA digits. This object specifies that the conversion occurs 'after' global title translation.
- cItpSccpGttGtaTable
- A table of SCCP Global Title Address entries.
- cItpSccpGttGtaTableEntry
- A list of SCCP Global Title Address attributes.
- cItpSccpGttGtaTT
- Translation Type (TT) for this Global Title Address.
- cItpSccpGttGtaNAI
- Nature of Address Indicator (NAI) for Global Title Address.
- cItpSccpGttGtaNP
- Numbering Plan (NP) for this Global Title Address.
- cItpSccpGttGtaGTI
- Global Title Indicator (GTI) for this Global Title Address.
- cItpSccpGttGtaAddr
- The Global Title Address is 8 octets of the Called Party Address (CDPA).
- cItpSccpGttGtaAddrDisp
- The ASCII display string of Global Title Address of 15 hex digits of the Called Party Address (CDPA). This object is deprecated so as to allow a null display string for a 'default' GTA.
- cItpSccpGttGtaAddrLen
- The number of hex digits in the Global Title Address of the Called Party Address (CDPA). This object is deprecated so as to allow a GTA address length equal to zero.
- cItpSccpGttGtaSelName
- The Global Title Address selector name from cItpSccpGttSelTable.
- cItpSccpGttGtaResType
- The SCCP Global Title Translation result type.
- cItpSccpGttGtaResPc
- When the GTA translates to a point code, it has a valid point code and cItpSccpGttGtaResType is 'pc'. Otherwise it is zero.
- cItpSccpGttGtaResMap
- When the GTA translates to a point code and an optional ssn, it has a valid point code and cItpSccpGttGtaResType is 'pcssn'. Otherwise it is zero.
- cItpSccpGttGtaResAppGroup
- When the GTA translates to an application group, it has a valid application group name and cItpSccpGttGtaResType is 'app'.
- cItpSccpGttGtaTTorSSN
- When this object is 'tt', the object cItpSccpGttGtaTTorSSNvalue specifies the SCCP GTT Translation Type (TT). When this object is 'ssn', the object cItpSccpGttGtaTTorSSNvalue specifies the SCCP SubSystem Number (SSN).
- cItpSccpGttGtaRoutingInd
- The SCCP GTT GTA specifies the routing indicator. When cItpSccpGttGtaResType is 'pc' or 'pcssn', this object has a valid routing indicator. When cItpSccpGttGtaResType is 'app' or 'as', the routing indicator is not applicable.
- cItpSccpGttGtaQOS
- The SCCP GTT GTA specifies the QOS.
- cItpSccpGttGtaAddrDispZB
- The ASCII display string of Global Title Address of 15 hex digits of the Called Party Address (CDPA). A zero length string specifies a default GTA value for the selector.
- cItpSccpGttGtaAddrLenZB
- The number of hex digits in the Global Title Address of the Called Party Address (CDPA). For a default GTA, the address length is zero.
- cItpSccpGttGtaAsName
- The Application Server (AS) name specified by the GTA. It is valid only when cItpSccpGttGtaResType is 'as'. Otherwise it is a zero length string.
- cItpSccpGttGtaTTorSSNvalue
- This object specifies SCCP GTT Translation Type (TT) value when cItpSccpGttGtaTTorSSN is 'tt'. It specifies SCCP SubSystem Number (SSN) value when cItpSccpGttGtaTTorSSN is 'ssn'. A zero value specifies that the TT or the SSN is not applicable for this GTA ...
- cItpSccpGttAppTable
- A table of SCCP GTT Application Group Table entries.
- cItpSccpGttAppTableEntry
- A list of SCCP GTT Application Group attributes.
- cItpSccpGttAppName
- The GTT Application Group name.
- cItpSccpGttAppCost
- The cost for the item in the GTT Application Group.
- cItpSccpGttAppType
- The type of the item in the GTT Application Group.
- cItpSccpGttAppPc
- The point code specified by the item in the GTT Application Group.
- cItpSccpGttAppSsn
- The subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cItpSccpGttAppItemType is 'pcssn'. Otherwise it is zero.
- cItpSccpGttAppRi
- The routing indicator (RI) specified by the item in the GTT Application Group.
- cItpSccpGttAppMult
- The multiplicity of the GTT Application Group.
- cItpSccpGttAppRefCount
- The reference count for the GTT Application Group.
- cItpSccpGttAppGrTable
- A table of SCCP GTT Application Group Table entries.
- cItpSccpGttAppGrTableEntry
- A list of SCCP GTT Application Group attributes.
- cItpSccpGttAppGrName
- The GTT Application Group name.
- cItpSccpGttAppGrCost
- The cost for the item in the GTT Application Group.
- cItpSccpGttAppGrEntNum
- The entry number for the same cost for the item in the GTT Application Group.
- cItpSccpGttAppGrType
- The type of the item in the GTT Application Group.
- cItpSccpGttAppGrPc
- The point code specified by the item in the GTT Application Group.
- cItpSccpGttAppGrSsn
- The subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cItpSccpGttAppItemType is 'pcssn'. Otherwise it is zero.
- cItpSccpGttAppGrRi
- The routing indicator (RI) specified by the item in the GTT Application Group.
- cItpSccpGttAppGrMult
- The multiplicity of the GTT Application Group.
- cItpSccpGttAppGrRefCount
- The reference count for the GTT Application Group.
- cItpSccpGttAppGrAsName
- The Application Server (AS) name specified by the item in the GTT Application Group. It is valid only when cItpSccpGttAppGrItemType is 'as'. Otherwise it is a zero length string.
- cItpSccpGttAppGrNewSsn
- The new subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cItpSccpGttAppGrItemType is 'as'. Otherwise it is zero.
- cItpSccpGttAppGrNumUsed
- The number of times this item in the GTT Application Group is used successfully.
- cItpSccpGttPrefTable
- A table of SCCP GTT Prefix Conversion Table entries. When a packet with GTA is received, it may need global title translation depending on Translation Type (TT), Numbering Plan (NP), Network Address Indicator (NAI) and Global Title Indicator (GTI) present ...
- cItpSccpGttPrefTableEntry
- A list of SCCP GTT Prefix Conversion attributes.
- cItpSccpGttPrefName
- The GTT Prefix Conversion table name.
- cItpSccpGttPrefInAddr
- If the GTA of the Called Party Address (CDPA) matches the digits in this object, then the prefix conversion is performed.
- cItpSccpGttPrefOutAddr
- If the GTA of the Called Party Address (CDPA) matches the digits in cItpSccpGttPrefInAddr then this object is used in the prefix conversion.
- cItpSccpGttPrefTblNAI
- Nature of Address Indicator (NAI) for the Prefix Conversion Table.
- cItpSccpGttPrefTblNP
- Numbering Plan (NP) for the Prefix Conversion Table.
- cItpSccpGttPrefItemNAI
- Nature of Address Indicator (NAI) for the deprecated item in this Prefix Conversion Table.
- cItpSccpGttPrefItemNP
- Numbering Plan (NP) for the deprecateditem in this Prefix Conversion Table.
- cItpSccpScalarsGroup
- SCCP main objects.
- cItpSccpGttConPcGroup
- SCCP Concerned Point Code objects.
- cItpSccpGttMapGroup
- SCCP GTT Mated Application objects.
- cItpSccpGttSelGroup
- SCCP GTT Selector objects.
- cItpSccpGttGtaGroup
- SCCP GTT Global Title Address objects.
- cItpSccpGttAppGroup
- SCCP GTT Application Group objects.
- cItpSccpConfigStatusGroup
- Objects to provide information on configuration status and time when changes where made to the SCCP configuration.
- cItpSccpGttSelGroupRev1
- SCCP GTT Selector objects.
- cItpSccpGttGtaGroupRev1
- SCCP GTT Global Title Address objects.
- cItpSccpGttAppGrGroup
- SCCP GTT Application Group objects.
- cItpSccpGttPrefGroup
- SCCP GTT Prefix Conversion Table objects.
- cItpSccpGttGtaGroupRev2
- SCCP GTT Global Title Address objects.
- cItpSccpGttAppGrGroupRev2
- SCCP GTT Application Group objects.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
