CISCO-LES-MIB

CISCO-LES-MIB Download

MIBs list

The MIB module for the management of LANE Service in Cisco devices.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-LES-MIB

lesTable
A (conceptual) table containing all instances of LESs on this device.
lesEntry
An entry (conceptual row) in the lesTable.
lesElanName
The name associated with the emulated LAN which this LES services.
lesIndex
A unique identifier for this LES servicing this ELAN. This value must remain constant while the entry is in existence and during the operation of the agent (i.e. It is allowed to change after reboot). For implementations that do not allow mo ...
lesAtmAddrSpec
The ATM address of the designated LES. Note that setting this object will have the side effect of reinitializing the LES and consequently dropping all clients connected to it. If this object is not specified at row creation time t ...
lesAtmAddrMask
An address mask that when used with the lesAtmAddrSpec specifies the portion of the LES' ATM address that is desired to be configured. Note that setting this object will result in the reinitialization of the LES,consequen ...
lesAtmAddrActual
The resultant ATM address in use by the LES. This object is a product of the specified ATM address, mask and interaction with the switch via the ILMI.
lesIfIndex
The interface that a LES will receive control connections on. The value specified for this object must equate to a value of ifIndex in the ifTable. The interface will be for that particular ATM port (the physical interface, not a logical layer on top of ...
lesSubIfNum
Specifies the sub-interface number that the LES will reside on. This sub-interface may be shared with a LEC or BUS of the same ELAN but is not required to do so. If no value is specified for this object at row creation time, then a sub-interfa ...
lesColocBusAtmAddrSpec
For those implementations who do not allow the separate creation/deletion of the LES and BUS this object allows the operator to specify the ATM address of the BUS at LES creation time. For implementations that allow separate process creatio ...
lesColocBusAtmAddrMask
An address mask that when used with the lesColocatedBusAtmAddr specifies the portion of the BUS' ATM address desired by management. Note that setting this object will have the side effect of reinitializing the BUS and consequen ...
lesColocBusAtmAddrActl
The ATM address in use by the BUS. This object is a product of the specified ATM address, its mask and interaction with the switch through the ILMI.
lesUpTime
The value of sysUpTime when this LES became activated.
lesLanType
The type of legacy LAN that this LES emulates.
lesMaxFrm
The maximum frame size that the specified LAN type can accept.
lesJoinTimeout
The number of seconds that must elapse before a Join request can be timed-out.
lesLecsAtmAddr
The ATM address associated with the LECS used by this LES. If no LECS is in use by the LES then this object will have the value of all 0's (i.e 0x0000...). If it is desired that the LES get the address of the LECS through the ILMI then this ob ...
lesControlDistVpi
The virtual path identifier of the control distribute VCC to all clients, if it exits.
lesControlDistVci
The virtual channel identifier of the control distribute VCC to all clients, if it exists.
lesOperStatus
This object reflects the actual state of the LES which may differ from that of the lesAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding lesAdminStatus is 'active'.
lesAdminStatus
The desired state of the designated LES as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the lesOperStatus.
lesStatus
The status of this entry (conceptual row). This row cannot be set to active until an appropiate value of lesIfIndex has been specified.
lesSegmentID
The segment ID of the emulated LAN this LES is servicing. This object is only valid if the lesLanType is dot5(2).
lesStatsTable
A (conceptual) table of statistics associated with LES instances on the device.
lesStatsEntry
A (conceptual) row in the lesStatsTable which corresponds to the statistics kept by a particular instance of a LES.
lesInErrors
The number of frames received by the LES which were either malformed or did not follow standard protocol (i.e. receiving a LE-ARP request for a multicast address).
lesInErrorLastLec
The ATM address of the LE client whose last frame to the LES resulted in an increment to the lesInErrors counter.
lesInFlushReplies
The number of Flush replies that have been received by the LES and forwarded onto its clients.
lesInJoinReqs
The number of LE_JOIN_REQUESTs received by this LES since activation.
lesOutJoinFails
The number of rejection LE_JOIN_RESPONSEs transmitted by this LES since activation.
lesJoinLastFailCause
The cause for the transmission of the last rejection LE_JOIN_RESPONSE. This is the value of the status field within the rejection response. If the server has never issued a rejection response then this object will have the value of 0.
lesJoinLastFailLec
The ATM address of the client whose last LE_JOIN_REQUEST resulted in a rejection by this server. If the server has never issued a rejection response then this object will have the value of all 0's (i.e. 0x000...).
lesOutConfigReqs
The number of LE_CONFIGURE_REQUESTs sent by this LES since activation.
lesInConfigResps
The number of successful LE_CONFIGURE_RESPONSEs received by this LES since activation.
lesInConfigFails
The number of rejection LE_CONFIGURE_RESPONSEs received by this LES since activation.
lesInRegisReqs
The number of LE_REGISTER_REQUESTs received by this LES since activation.
lesOutRegisFails
The number of rejection LE_REGISTER_RESPONSEs transmitted by this LES since activation.
lesRegisLastFailCause
The cause for the transmission of the last rejection LE_REGISTER_RESPONSE. This variable has the value of the status field within the last failure register response. If the server has never issued a failed registration response then the valu ...
lesRegisLastFailLec
The ATM address of the client whose last LE_REGISTER_REQUEST to this LES resulted in failure. If the server has never issued a failed registration response then the value of this object shall be all 0's (i.e. x0000...).
lesInUnregReqs
The number of valid LE_UNREGISTER_REQUESTs received by this LES since activation.
lesInLearpUcasts
The number of LE_ARP_REQUESTs received by this LES since activation and responded to directly. This applies to all LE_ARP requests for addresses registered by LE clients with the LES. Note that a LES is not required to answer LE_ARP re ...
lesInLearpBroadcasts
The number of LE_ARP_REQUEST received by the LES for the broadcast address. These requests are responded to with the BUS' ATM address.
lesOutLearpFwd
The number of LE_ARP_REQUEST frames forwarded onto the control distribute VC.
lesInLearpResps
The number of LE_ARP_RESPONSEs received by this LES and forwarded onto the control distribute.
lesInNarpReqs
The number of Negative LE_ARP requests received by this LES and forwarded on to the control distribute VC.
lesInTopolReqs
The number of LE_TOPOLOGY_REQUESTs received by this LES since activation.
lesClientTable
A (conceptual) table listing the clients associated with a LES. Note that the local or network management will not create or destroy rows in this table but may only inspect what LECs are currently joined with the LES.
lesClientEntry
An entry (conceptual) row that denotes a client that is joined with the LES.
lesClientLecid
The LECID selected for an LEC by the LES during the JOIN phase.
lesClientAtmAddr
The primary ATM address associated with the designated LEC.
lesClientState
The current state of the LEC. Note that busConnect is only a monitorable state if the BUS is colocated with the LES. In the event that it is not then the client state should proceed immediately to operational within this table (though it may not do so i ...
lesClientIfIndex
The interface of the bi-directional control direct connection between the LEC and LES.
lesClientControlVpi
The VPI of the bi-directional control direct connection between the LEC and LES.
lesClientControlVci
The VCI of the bi-directional control direct connection between the LEC and LES.
lesClientStatus
The status of the (conceptual) row. Note that this object may only return the active(1) state. The only value which may be written to this object is the destroy(6) state which will cause the client to be dropped from the ELAN.
lesMacRegTable
A (conceptual) table of MAC addresses registered with the LES by its clients.
lesMacRegEntry
An entry (conceptual row) that denotes a registered MAC address and the ATM address that corresponds to it.
lesMacRegMacAddress
The MAC address of a registered client.
lesMacRegAtmAddr
The ATM address of the LEC that corresponds to the registered MAC address.
lesMacRegLecid
The LECID of the client who registered the designated MAC address.
lesRDRegTable
A (conceptual) table of Route Descriptors registered with the LES by its clients.
lesRDRegEntry
An entry (conceptual row) that denotes a registered Route Descriptor address and the ATM address that corresponds to it.
lesRDRegSegmentId
The segment ID of a registered client.
lesRDRegBridgeNum
The bridge number of a registered client going to the designated segment.
lesRDRegAtmAddr
The ATM address of the LEC that corresponds to the registered Route Descriptor.
lesRDRegLecid
The LECID of the client who registered the designated Route Descriptor address.
ciscoLesGroup
The core set of objects necessary to managing a LES.
ciscoLesStatsGroup
The set of objects containing statistical information about a LES.
ciscoLesColocatedGroup
The objects needed to supported collocated LANE service components.
ciscoLesLecsGroup
The objects necessary for those LES implementations that use the LECS for LEC verification.
ciscoLesCntrlDistGroup
The additional objects for LESs that support a point to multipoint control distribute VC.
ciscoLesSubIfGroup
For those implementations that wish to tie their LE service components to an particular sub-interface.
ciscoLesClientGroup
A collection of objects used for inspecting the clients requesting the attention/service of the LES.
ciscoLesTokenRingGroup
A collection of objects used for managing LESs capable of emulated token rings.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list